CONSTRUCTION OF NEW LAB OF DIMENSION (7 X 10.6) IN KV INS CHILKA UNDER PM SHRI SCHEME PAN INDIA-REG UNDER GE CHILKA

Amount

Surface dressing not exceeding 15 cm deep in soft/loose soil complete all as specified and as directed.

Excavation over areas not exceeding 1.5 M deep and getting out in any type of soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, sewage lines, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil etc all complete

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete , M-30 (Design Mix) using 20mm graded stone aggregate as in foundations, including rafts, footing foundation beams plinth beams ; bases for coumns etc basement slabs and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete , M-30 (Design Mix) using 20mm graded stone aggregate as columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for reinforced cement concrete , M-30 (Design Mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 M span complete all as specified and as directed.

M&L for reinforced cement concrete , M-30 (Design Mix) using 20 mm graded stone aggregates as in chajjas complete all as specified and as directed.

M&L for reinforced cement concrete , M-30 (Design Mix) using 20 mm graded stone aggregates as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for reinforcement cement concrete type B1 1:2:4 (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.

S&F TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

S&F TMT bar 5mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

S&F Mild steel TMT bar 6 to 8 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

Use and waste of formwork to sides of pillars , posts, struts, piers, columns and stanchions of square, rectangular or polygonal, rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits ( if any) of foundation and plinth beams and similar works vertical or to batter of flat, rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc of flat, rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edge of flat ,rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick of flat, rough finished surface of concrete complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc all as specified and directed

M & L for 75mm thick PCC 1:4:8 type C-2 using 40 mm graded stone aggregate as in sub base of floor /hard standing / path all as pecified and as directed.

M & L for 75mm thick PCC (Plain cement concrete) 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base floor / hard standing / path all as specified and as directed.

M & L for 40mm thick PCC (Plain cement concrete) 1:2:4 type B1 using 20 mm graded stone aggregate as in sub base floor / hard standing / path all as specified and as directed.

M&L for 20 mm thick Granite stone(of any type) work (table rubbed polised) in steps, jambs, pillars, window cills, cooking platform, office counter set etc. fixed over and including 15 mm thick cement morter (1:4) including pointing in white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite etc all completed

M&L for light/dark shade double charged vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. including on skirting upto 150 mm height, set and jointed in neat cement slurry and pointed in white or colouredcement to match including fixed over and 15 mm thick screed in CM (1:4) complete all as specified and as directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set with grey pigment cement and pigments, jointed and pointed in neat cement slurry in floors/steps fixed over and including 15 mm thick screed bed of cement morter 1:4 complete all as specified and directed.

M&L for 75mm thick PCC type C2 1:3:6 (40mm garade aggregate) as in plinth protection/path complete all as specified and directed

M&L for rendering 10mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6 including finishing even and smooth withour using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete sufaces in cement mortar 1:4 mixed with water proofing liquid @ 200ml per 50 kg cement including finishing even and smooth withour using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound

M&L for preparation of newly plastered or unplastered surfaces of walls and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of plastic emulsion paint over a coat of primer paint of approved shade on wallcomplete all as specified and directed.

M&L for preparation of new plastered external wall surfaces of any description over 10 cm width/girth and including applying two coat of weather coat anti dust emulsion paint, exterior grade of approved shade over a coat of alkali guard anti efflorescence primer as per manufacturer's instruction complete all as specified and as directed.

M&L for providing, cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs incl necessary form work complete all as specified and as directed.

M&L for 15mm thick cement screed or bedding layer in cement mortar 1:4 on concrete or bricks surface finished even and smooth without using extra cement to receive roof treatment, mixed with water proofing compound liquid @200ml per 50 kg cement over and including a neat cement slurry @ 3 Kg/Sqm over cleaned roof surface, complete all as specified and as directed. Note : liquid water proofing compound shall be measured and paid separately.

M&L for water proofing roof treatment, consists of a five layered Atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including priming the surface with a coat of hot blown bitumen of grade 85/25 @ 1.2 kg/Sqm each at top and bottom of the membrane as bonding material, and a coat of bituminous aluminium primer @ 100 gm/Sqm on top, including sealing all joints by thermo fusion, complete all as per manufacturer's instructions.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F welded steel wire n exc 4 Kg/Sqm fabric supplied and fixed complete to wood or steel members complete all as specified and as directed.

M&L for preparing of surfaces of steel for painting of any description, over 10cm in width or girth, on new surface over a coat of primer of red oxide zinc and two coat of synthetic enamelled paint over it all as specified and as directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top lid shall be threaded closing system) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections complete all as specified and as directed.

S&F 25mm dia bore of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F 25 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and as directed.

S&F 25mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.

S&F chromium type plated 15 mm dia bore of pipe bib taps , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair PVC floor trap including jointing with solvent cement to waste pipe 75 mm dia

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F 32 mm dia size PVC waste pipe with cup washers complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length joint fixed with solvent to walls & floors 110 mm bore.

S&F PVC (SWR) pipes single socketed in any length joint fixed with solvent to walls & floors 75mm bore.

S&F 110 bore PVC (SWR) bends any radius complete all as specified and directed

S&F 75 bore PVC (SWR) bends any radius complete all as specified and directed

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and as directed.

M&L for pressed steel frames size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixedto wall complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F mediam weight, cold rolled mild steel butt hinges of 100 mm size, complete all as specified and as directed.

S&F extruded aluminium alloy handles, 150mm long fabricated type, anodised all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed.

S&F 300mm MS, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 250 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed

S&F door stopper 140mm overall length of aluminium alloy body and tongue with twin rubber shoes complete all as specified and as directed.

S&F aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and as directed.

M&L for preparation of new painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over coat of pink primer of approved shade complete all as specified and directed.

S&F Powder coated of any colour anodized aluminum frame (minimum thickness of powdere coating 50 micron) for door/windows/ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F anodised powder coated of any colour aluminium sliding window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium anodised fittings including locking arrangement and all accessories commplete all as specified and as directed. (Note : glass shall be measured seperatly.)

S&F Aluminium anodised powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed.

S&F 4.8 mm thickness of sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and as directed. Make : Hindustan,Pilkinton glass works Ltd/Modiguard.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed

S&F semi perforated 12mm thick micro tegular edged GRG false ciling tiles at all height with GRG (Glass fibre reinforced gypsum) false ceiliing tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%,humidity resistance of 99% , NRCO 0.50 to 0.75 as per IS 8225 : 1987 , noncombustible as per BS 476 (Part-4) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides ) comprising of amin T runners of size 15x32mm of length 3000 mm , cross T of size 15x32 of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) ie 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shaped level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on priphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work all as specified and as directed.

Returning filling incl spreading, levelling watering and well ramming in layers not.exce 25 CM all as specified and directed.

Removing excavated material, soil to a distance not exce 50M and depositing where directed at a level n.exe 1.50M above the existing point all as specified and directed.

M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as directed and specified.(Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision)

All as per above item but one 3 pin socket outlet 5 Amps on same board.

All as per above item but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty.

All as per above item but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductor and 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire.

M&L for Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 2.5 Sqmm and one run of 2.5 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and all as specified.Note : Two runs of 2.5 Sqmm copper wire,one run of 2.5 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza,Make of PVC Conduit:-Plaza/Prestoplast/Precision)

S&F Ceiling rose,3 terminal PVC/poly carbonate isolated body. Make:- Anchor / Cona/Havells.

Supply and fixing of modular switch one way 6 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing of modular switch one way 16 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing modular socket outlet 2 /3 pin 6 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing modular socket outlet 2 /3 pin 6/16 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing of Modular Fan regulator,120 watts (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 3 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 8 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing modular metal flush box 3 Module complete all as specified and directed.

Supply and fixing modular metal flush box8 Module complete all as specified and directed.

S&F MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 8way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified.

S&F MCB, SPN. 40 Amps rating 240, volt, 'C' series, 10 kA (Make Havells DHMZCSNF040 or Standard/Legrand/HPL/L & T)

S&F MCB SP, 6-32 Amps, 240 volt, 'C' Series, 10 kA ( Make Havells,Cat No.DHMZCSPF006-032 or equvalent to Standard/Legrand/HPL/L & T)

Supply and fixing High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. ( Make /Model No :- CCS-100-20-65-HL2-DP-NWH(BRIGHT LINEA) of Crompton or equivalent of Phillips/Havells/ Bajaj/Wipro )

M&L for Earthing with galvanized steel earth plate electrode of size 60cm x 60cm x 6 mm thick,buried directly in ground(earth pit not less than 2.25 meters deep below ground Level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised Iron Wire of size 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers etc, GI earth lead strip duly protected by 40 mm dia GI pipe (light grade) and 20 MM GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work in soft/loose soil and disposal of soil to a distance not exceeding 50 Mtrs, PCC (1:3: 6) type C1 as in concrete pit,50mm thick precast RCC (1:1.5:3) type A1 as in cover slab duly reinforced with 8 mm dia TMT bar @ 100 mm c/c both way and two nos lifting handle made cut of 10 mm dia TMT bar and set in cement mortar (1:4), testing etc complete and as specified in electrical plate No 3 of SSR part-I including taking down old earthing plate & GI Wire

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) of make: Orient/Bajaj/Usha

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16sq mm 4 core x 16 SQMM

Supply and fixing in repair of GI pipe,40 mm dia 'light grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors for cable protection all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers etc all complete of make: Bajaj/Usha/Orient.

Supply and fixing HDPE double wall pipe corugated pipe of size 63 mm outer dia for cable protection including Coupler laid in trenches in lieu of sand/brick protection complete all as specified and directed.

ABHIMANYU MAHARANA (BID ID -3521777)

Mahalaxmi Traders (BID ID -3522124)