Construction of interlocking paver Block and C.C. Work at village tehalari shantidham. Ward No.64, Zone 23, file No. 111/26X3/6. 2nd Call

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine ith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of stone dust sand , filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam confirming to provisions of Section 406 of specifications including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base/base course on well-prepared surface and compacting with vibratory roller to achieve the desired density. (1365-89=1276) 4.4.1 Deduction if paver is not used for spreading.

Providing and Laying Cement Concrete Grade M-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm). Road

Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process, crushing strength not lessthan40kg/sqcm and water absorption not more than 15% in foundation and plinth 6.1.2. Cement mortar 1:6 (1 cement : 6 coarse sand

12 mm cement plaster of mix : 13.1.1 1:4 (1 cement: 4 sand)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete Fixed to steel windows by welding. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. 4.1.2 Cement concrete grade M-20 (Nominal Mix) with20mm maximum size of stone aggregate

7.38 Stone tile work for wall lining upto 10m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement with an ad mixture of pigment to match the stone shade.7.38.1 8mm thick (mirror polished and machine cut edge) 7.38.1.1 Granite stone of any colour and shade.

2.18 Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. 2.18.1 Moorum/Hard copra