Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹37.2 L+₹55,000 (1.50%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹37.4 L+₹76,985 (2.10%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹37.9 L+₹1.3 L (3.46%)Rejected-Finance | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹41.1 L+₹4.5 L (12.2%)Rejected-Finance M S RRK PROJECTS D 306 ADG P CHENNAI 11 3RD CROSS SIR MV LAYOUT VIDHYARANYAPURA POST BANGALORE 560097 | BENGALURU URBAN | KARNATAKA | 560097 | L5 | Rejected-Finance Not Being Lowestz |
| Sl No | Description | Qty | Unit | Pacific Enterprises L6 | Sahara Engineers L3 | MAJ CONSTRUCTIONS L4 | RRK PROJECTS L5 | manoj trading agencies L1 | KRD ASSOCIATE L2 |
|---|---|---|---|---|---|---|---|---|---|
| 0.00SCHEDULE OF WORKS | |||||||||
| 1.00 | Disconnecting Incoming cable and all out going cables of any sizes from the panel carefully,taking out all cables carefully as per site conditions and kept a side for reuse and reconnections in the new panel as per site requirements, taking out existing old panel from the site carefully complete all as directed by Engineer-in-charge.
Note - Earth work and PCC work as applicable shall be measured and paid separately. Location - RMED 109. | 1 | EACH JOB | 4,500 ₹4,500 | 500 ₹500 Lowest | 2,000 ₹2,000 | 5,000 ₹5,000 | 2,000 ₹2,000 | 7,000 ₹7,000 |
| 2.00 | Fabricate, Supply,installation, testing and commissioning self supporting totally enclosed factory fabricated LT panel board indoor type, powder coated , manufactured using seven tank process, made out of 2 mm with CRCA sheet from CPRI Certified validated panel manufactureres with both sides openings compartmental wise, ventilating louvers, dust and vermin proof neorprene rubber gasket, powder coated including danger plate and manufactureres label on front and rear of the panel, double earth strip provisions bottom of inside of the panel along with earthing studs - 02 Nos on body outer side of the panel for external earthing connections, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers etc suitable for 3 phase 4 wire, 415 vots, 50 Hz mounted on suitable size MS channel, in and including MS Angle iron frame of having minimum 50 cm above Ground level and 50 cm below ground level all as per site requiremnts as directed or PCC foundation, new aluminium lugs for connecting In / Out going cables,The panel comprising of the folowing items complete all as directed .Location - RMED 109. | 1 | EACH JOB | 1,45,000 ₹1,45,000 | 1,19,915 ₹1,19,915 Lowest | 1,90,000 ₹1,90,000 | 2,07,000 ₹2,07,000 | 1,95,000 ₹1,95,000 | 2,10,000 ₹2,10,000 |
| 2.01(A) Aluminium bus bar 300Amps supported with suitable size porcelain isolators with suitbale size brass nut, bolts and washers with heat shrinkable colour coded PVC sleeving for 3 phase and neutral -01 set . Incomer: (B) MCCB Adjustable thermal and adjustable magnetic 4 pole rating 250 Amps ICS=100%ICU not less than 25 KA 415 V 50 Hz - 01 No. (C) RYB LED Indication Lamp - 01 set . (D)VAF Meter - 01 No (E) Current Transformer for metering 250/3 - 03 Nos (F) Control MCB 6A SP 10 KA C type - 03 Nos Outgoing: (G) MCCB Adjustable thermal and adjustable magnetic 4 pole rating 100 Amps ICS=100%ICU not less than 25 KA 415 V 50 Hz - 06 Nos, | |||||||||
| 3.00 | Disconnecting Incoming cable and all out going cables of any sizes from the panel carefully,, taking out all cables carefully as per site conditions and kept a side for reuse and reconnections in the new panel as per site requirements, taking out existing old panel from the site carefully complete all as directed by Engineer-in-charge. ,
Note - Earth work and PCC work as applicable shall be measured and paid seprately. Location - RMED DEED HALL | 1 | EACH JOB | 6,500 ₹6,500 | 500 ₹500 Lowest | 2,000 ₹2,000 | 5,000 ₹5,000 | 2,000 ₹2,000 | 7,000 ₹7,000 |
| 4.00 | Fabricate, Supply,installation, testing and commissioning self supporting totally enclosed factory fabricated LT panel board indoor type, powder coated , manufactured using seven tank process, made out of 2 mm with CRCA sheet from CPRI Certified validated panel manufactureres with both sides openings compartmental wise, ventilating louvers, dust and vermin proof neorprene rubber gasket, powder coated including danger plate and manufactureres label on front and rear of the panel, double earth strip provisions bottom of inside of the panel along with earthing studs - 02 Nos on body outer side of the panel for external earthing connections, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers etc suitable for 3 phase 4 wire, 415 vots, 50 Hz mounted on suitable size MS channel, in and including MS Angle iron frame of having minimum 50 cm above Ground level and 50 cm belpw ground level all as per site requiremnts as directed or PCC foundation, new aluminium lugs for connecting In / Out going cables,The panel comprising of the folowing items complete all as directed .Location - RMED DEED HALL | 1 | EACH JOB | 1,35,000 ₹1,35,000 | 94,250 ₹94,250 Lowest | 1,60,000 ₹1,60,000 | 1,43,000 ₹1,43,000 | 1,20,000 ₹1,20,000 | 1,20,000 ₹1,20,000 |
| 4.01(A) Aluminium bus bar 300Amps supported with suitable size porcelain isolators with suitbale size brass nut, bolts and washers with heat shrinkable colour coded PVC sleeving for 3 phase and neutral -01 set . Incomer: (B) MCCB Adjustable thermal and adjustable magnetic 4 pole rating 200 Amps ICS=100%ICU not less than 25 KA 415 V 50 Hz - 01 No. (C) RYB LED Indication Lamp - 01 set . (D)VAF Meter - 01 No (E) Current Transformer for metering 200/5 - 03 Nos (F) Control MCB 6A SP 10 KA C type - 03 Nos Outgoing: (G) MCCB Adjustable thermal and adjustable magnetic 4 pole rating 100 Amps ICS=100%ICU not less than 25 KA 415 V 50 Hz - 01 No. (H) MCB C type 32A SPN 10 KA, 'C' curve - 10 Nos (I) MCB C type 40A SPN 10 KA, 'C' curve - 08 Nos (J) MCB C type 63A TPN 10 KA, 'C' curve - 05Nos | |||||||||
| 5.00 | Disconnecting Incoming cable and all out going cables of any sizes from the panel carefully,, taking out all cables carefully as per site conditions and kept a side for reuse and reconnections in the new panel as per site requirements, taking out existing old panel from the site carefully complete all as directed by Engineer-in-charge. Note - Earth work and PCC work as applicable shall be measured and paid seprately. Location - RMED GROUND FLOOR MDC | 1 | EACH JOB | 6,000 ₹6,000 | 500 ₹500 Lowest | 2,000 ₹2,000 | 5,000 ₹5,000 | 3,000 ₹3,000 | 3,000 ₹3,000 |
| 6.00 | Fabricate, Supply,installation, testing and commissioning self supporting totally enclosed factory fabricated LT panel board indoor type, powder coated , manufactured using seven tank process, made out of 2 mm with CRCA sheet from CPRI Certified validated panel manufactureres with both sides openings compartmental wise, ventilating louvers, dust and vermin proof neorprene rubber gasket, powder coated including danger plate and manufactureres label on front and rear of the panel, double earth strip provisions bottom of inside of the panel along with earthing studs - 02 Nos on body outer side of the panel for external earthing connections, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers etc suitable for 3 phase 4 wire, 415 vots, 50 Hz mounted on suitable size MS channel, in and including MS Angle iron frame of having minimum 50 cm above Ground level and 50 cm belpw ground level all as per site requiremnts as directed or PCC foundation, new aluminium lugs for connecting In / Out going cables,The panel comprising of the folowing items complete all as directed .Location - RMED GROUND FLOOR MDC | 1 | EACH JOB | 1,35,000 ₹1,35,000 | 94,250 ₹94,250 Lowest | 1,30,000 ₹1,30,000 | 1,43,000 ₹1,43,000 | 1,65,000 ₹1,65,000 | 1,95,000 ₹1,95,000 |
| 6.01(A) Aluminium bus bar 300Amps supported with suitable size porcelain isolators with suitbale size brass nut, bolts and washers with heat shrinkable colour coded PVC sleeving for 3 phase and neutral -01 set . Incomer: (B) MCCB Adjustable thermal and adjustable magnetic 4 pole rating 250 Amps ICS=100%ICU not less than 25 KA 415 V 50 Hz - 01 No. (C) RYB LED Indication Lamp - 01 set . (D)VAF Meter - 01 No (E) Current Transformer for metering 250/5 - 03 Nos (F) Control MCB 6A SP 10 KA C type - 03 Nos Outgoing: (G) MCCB Adjustable thermal and adjustable magnetic 4 pole rating 100 Amps ICS=100%ICU not less than 25 KA 415 V 50 Hz - 01 No. (H) MCCB Adjustable thermal and adjustable magnetic 4 pole rating 63 Amps ICS=100%ICU not less than 16 KA 415 V 50 Hz - 01 Nos (I) MCB C type 63A FP 10 KA - 06Nos | |||||||||
Tender Value
₹41.9 L
EMD Value
₹83,800
Closing Date
15 Oct 2025, 6:00 pmClosed
GARRISON ENGINEER I Rnd D WEST BANGALORE
GARRISON ENGINEER I RndD WEST BANGALORE DRDO COMPLEX CV RAMAN NAGAR BANGALORE
REPAIRS TO CERTAIN INTERNAL ELECTRICAL WIRINGS FANS MCB DBs SUBMAIN WIRING RENEWAL MAITENANCE OF EARTHINGS HIGH BAY LIGHT FITTINGS AND OTHER ALLIED WORKS IN TECHNICAL AREAS AT LRDE UNDER GE I R AND D WEST BANGALORE
2025_MES_729871_1
GE(I)/R ND D (WEST)/BAN/TOKEN/61 OF 2025-26 8425 /E8
Open Tender
Civil Works
Item Rate
270 days
Work
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER I Rnd D WEST BANGALORE
₹83,800
4 Nov 2025
8 Sept 2025
20 Oct 2025
8 Sept 2025
15 Oct 2025
30 Sept 2025
9 Sept 2025 - 17 Sept 2025
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .