PROVISION OF 2X4.0TR TOWER TYPE AND 6X1.5TR SPLIT TYPE ACS FOR ENVIRONMENTAL CONTROL AND AUDIO VISUAL DISPLAY CENTRE AT HQ DELHI AREA, 6XDESERT COOLER WITH STAND AT DIPAC AND SERVO VOLTAGE STABILIZER FOR LIFT BLOCK NO 33 TO 62 AT PIRU VIHAR UNDER GE

Amount

SECTION - I

Supply, Installation, commissioning and testing of floor mounted tower type Air Conditioner, Hot & Cold Type , electric driven three phase 415 volts, 50HZ/ three phase of minimum capacity 4.0 Ton, anti corrosive blue fins including communication copper cable of suitable size from outdoor unit to indoor unit and making hole on existing surface of walls/ floors etc and making good the disturbed surfaces of walls/ floors as per existing finish complete all as specified and as directed. (Make:- Latest Model of Daikin/ Latest Model of O-General/ Latest Model of Hitachi/ Latest model of Panasonic or equivalent latest model and make of Blue Star.)

Supply, installation, testing and commissioning of Servo controlled voltage stalblizer of capacity 20 KVA (confirming to BIS 9815 : Part1 :1994) suitable for three phase, 50 Hz, naturally oil cooled, indoor, unbalanced load, copper wounded, metallic body duly powder coated with lifting hooks four numbers, digital display type, relay free smooth and silent operation with 1st filling of Transformer Oil (ISI marked) upto level complete all as specified and including the following features :- (a) Input voltage 340V - 480V (b) Output Voltage stablized at any designed/ desired voltage 415V+ 1% (c) Rated frequency 50Hz (d) No distortion in wave form (e) Responcse time not to exceed 20 milli seconds (f) Sensitivity + 1% (g) Rate of correction8 Volt/ second for single phase and 13 Volt/ second for phase to phase (h) Effeciency more than 95% (i) Type of load : three phase unbalanced type. (j) Digital Display Voltmeter/ Ammeter Protections :- (i) Overload/ Short circuit protections (ii) High/low voltage cut off (iii) By pass arrangement in of emergency (iv) Single phase sequence change protection (Make:- AE/ APLAB/ ANDREW XULE/INDIAN TRANSFORMER & ELECTRICALS P. LTD. (GURGOAN)/V-GUARD/SINETRAC/ VOLINA/ VINITEC/ IECO/JAY BEE Industries) Note:- The contractor shall arrange for factory visit for the rep of accepting officer for testing/ inspection of servo voltage stabilizer before dispatch at site.

Supply, installation, testing and commissioning of Window type air conditioner of capacity 1.5 TR, BEE not less than 5 Star rating, refrigerant type R-410A, fitted with highly energy efficient rotary compressor, including making necessary arrangements like cutting grills for fixing on window and making good the disturbed surfaces complete all as specified and as directed. (Make - Voltas/Bluestar/Hitachi/ Daikin/ O-General) Note :- (i) The rates quoted by the contractor shall deemed to include the disconnection of old ACs window/split type of any capacity from site of installation and transporting to AGE E/M (AC) store yard for depositing in store.

Supply, Installation, testing and commissioning of BEE 3/4 star rated frost free refrigerator double door, electric driven (single phase, 230V, 50 Hz, AC supply) of capacity not less than 308 Ltrs capacity with non CFC refrigerant inverter based compressor complete all as specified and as directed. (Make-SAMSUNG, Latest Model/ Whirlpool Latest Model or equivalent latest model of Voltas/ Videocon)

Material & labour for earthing with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron strip of size 25 x 4mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @150 c/c both ways, one lifting handle made of 10mm dia TMT bar embedded in cover slab and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer of 15cm thick including testing on completion all as specified and as directed. (Note:- Each protection pipe and earth lead upto and including 7.50m length is deemed to be included in unit rate of of this item.)

Supply, Installation, testing and Commissioning of voltage stabilizer for automatic operation single phase, wall mounted ,Copper wounded ,Air cooled with digital display designed for input variation between 160 Volt to 260 Volt with output voltage 220 + 9% Volt with Calibration accuracy + 3% with high low cutoff , Intelligent time delay facility and of capacity 4.0 KVA complete all as specified and as directed. (Make:- AE/ APLAB/ ANDREW XULE/INDIAN TRANSFORMER & ELECTRICALS P. LTD. (GURGOAN)/V-GUARD/SINETRAC/ VOLINA/ VINITEC/ IECO/JAY BEE Industries)

Supply, Installation, commissioning and testing of Inverter Technology Hot & Cold Split Type wall mounted Air Conditioner (indoor & outdoor unit with cordless remote control unit) of Capacity not less than 1.5 TR, BEE 5 star rating , fitted with rotary compressor (5 years Warranty), Refrigerant type R-410A/R-32, rated cooling capacity not less than 5100 Watts or 17400 BTU/hr and rated heating capacity not less than 5300 Watts or 18100 BTU/hr including outdoor stand (Wall mounted/ Floor mounted), PVC FRLS grade multi stranded copper conductor cable 4 core 2.5 Sqmm for connections with outdoor unit, powder coated brackets for outdoor unit, clamps, nuts, bolts washers drilling holes on walls/ceiling for connection/drain pipes and making good the disturbed surfaces of wall/ ceiling with cement mortar, white cement and painting work to match the existing surfaces of walls complete all as specified and directed. (Make:- Latest Model of Daikin/ Latest Model of O-General/ Latest Model of Hitachi or equivalent latest model and make of Blue Star.) Note:- (i) PVC drain pipe of suitable size & Heavy Duty copper connection pipes including suitable insulation upto 3 mtrs are deemed to be included in above quoted rate. (ii) PVC drain pipe of suitable size & Heavy duty copper connection pipes including suitable insulation Exceeding 3 mtrs shall be measured and paid seperately under relevant item.

Supply, Installation, testing and Commissioning of voltage stabilizer for automatic operation single phase, wall mounted ,Copper wounded ,Air cooled with digital display designed for input variation between 160 Volt to 260 Volt with output voltage 220 + 9% Volt with Calibration accuracy + 3% with high low cutoff , Intelligent time delay facility and of capacity 2.0 KVA complete all as specified and as directed. (Make:- AE/ APLAB/ ANDREW XULE/INDIAN TRANSFORMER & ELECTRICALS P. LTD. (GURGOAN)/V-GUARD/SINETRAC/ VOLINA/ VINITEC/ IECO/JAY BEE Industries)

Supply, installation, testing and commissioning of vertical distribution board 4 way, double door type, IP-54 protected, 50HZ, AC supply, three phase and neutral with provision for MCB of 100 Amps, 4 pole as main incomer (1 No) and MCBs of 32 Amps 3 pole as outgoing (03 nos) and provision for connectors for common neutral link and earth dolly complete all as specified and as directed. (Make : LEGRAND/ L&T / ABB/SEIMENS.) NOTE:- MCCB & TP MCBs shall be measured and paid separately under relevant items of Sch 'A'

Supply and fixing Single pole and neutral sheet metal enclosure with a three pin metal clad socket complete with one single pole MCB 20 to 32 Amps complete all as specified and directed by Engr-in-Charge. (Make : LEGRAND/ L&T / ABB/SEIMENS.)

Supply and fixing Triple pole and neutral sheet metal enclosure with a three pin and earth plug with socket complete with one four pole MCB 32 Amps complete all as specified and directed by Engr-in-Charge. (Make : LEGRAND/ L&T / ABB/SEIMENS.)

Material and labour for AC sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC casing caping (medium grade) of adequate size with all fittings and accessories surface type (wall/ Ceiling) including one run of 4 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire complete all as specified and as directed. {Note:- (i) Two runs of cable, one run of earth wire with PVC casing caping shall be measured as one unit length. (ii) Extra length of cable required for connection of DB shall be deemed to be included in the quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the PVC casing caping (iv) Suitable color code of wire must be ensured for phase/ neutral/ earth. (Make of cable:- NICCO / FINOLEX / RR KABEL/ HAVELL'S/ POLYCAB / KEI INDUSTRIES LTD and make of PVC casing caping- FINOLEX / PAYAL/KALINGA/ PRESTO PLAST.)}

Material and labour for AC sub main wiring with three runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC casing caping (medium grade) of adequit size with all fittings and accessories surface type (wall/ Ceiling) including two runs of 6 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire complete all as specified and as directed. {Note:- (i) Three runs of cable with one run of earth wire shall be measured as one unit length. (ii) Earth wire shall run inside the PVC casing caping (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth. (v) (Make of cable:- NICCO / FINOLEX / RR KABEL/ HAVELL'S/ POLYCAB / KEI INDUSTRIES LTD and make of PVC casing caping:- FINOLEX / PAYAL/KALINGA/ PRESTO PLAST.)}

Supply, laying & fixing LT XLPE insulated, armoured electric power cable (heavy duty), aluminium stranded conductor, 1100 volts grade of cross sectional area 16 Sq mm, 4 core with suitable size cable glands, crimping type cables lugs etc laid in trenches or on floor/ wall/ poles complete all as specified and as directed. (Make: RR KABLE LTD/ FINOLEX/ POLYCAB/ KEI INDUSTRIES LTD/ HAVELLS) (Note:- Necessary excavation & earth work will be measured & paid separately)

Supply, laying & fixing LT XLPE insulated, armoured electric power cable (heavy duty), aluminium stranded conductor, 1100 volts grade of cross sectional area 10 Sq mm, 4 core with suitable size cable glands, crimping type cables lugs etc laid in trenches or on floor/ wall/ poles complete all as specified and as directed. (Make: RR KABLE LTD/ FINOLEX/ POLYCAB/ KEI INDUSTRIES LTD/ HAVELLS) (Note:- Necessary excavation & earth work will be measured & paid separately)

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables/ pipes, etc. and not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for sand cushioning to the full width of trenches for protection of cables including spreading watering and consolidation complete all as specified and as directed. (Note:- Only punned down valume of sand to be measured).

Supply and laying bricks, old size, locally available best quality, flat, common clay laid in trenches across the trenches/ cable as cable protection complete all as specified and as directed.

S & F powder coated Mild steel junction box of size 450x450x150 mm, fabricated from CRCA sheet 2.00 mm thick outdoor type with front openable hinged door, locking arrangements with 4 pole copper bus bars of 200 Amps rating, mounted on DMC/SMC insulator, glands and lugs and provision for 100 Amps MCCB, 4 pole etc with angle iron legs of suitable size for fixing on plinth, including grouting legs on plinth with PCC 1:2:4 type B1 complete all as specified and as directed. Note:- MCCB shall be measured and paid separately under relevant items

Supply & fixing MCCB of capacity 100 Amp 4 pole ,415Volt AC with breaking capacity of 16 kA including spreader terminals with necessary clamps, cable lugs, glands, accessories etc. complete all as specified and as directed. (Make:- L&T/ LEGRAND/ ABB/ SIEMENS/ SCHNEIDER)

Supply and fixing MCB 40 Amps, 3 pole ,415 volt, C curve, breaking capacity 10 KA complete all as specified and as directed. (Make:- L&T/ LEGRAND/ ABB/ SIEMENS/ SCHNEIDER )

Supply & fixing heavy duty copper pipe of size 15mm (5/8") dia/ bore complete including insulation brazing, welding, nuts, bolts and screws of required size complete all as specified and directed by Engr-in-Charge. (Make:- DIAMOND/ STAR/ MALASIA/ CAMPIRO)

Supply & fixing heavy duty copper pipe of size 10mm (3/8") dia/ bore complete including insulation brazing, welding, nuts, bolts and screws of required size complete all as specified and directed by Engr-in-Charge. (Make:- DIAMOND/ STAR/ MALASIA/ CAMPIRO)

Material and labour for construction of shade triangular shape erected with GI poles and PPGI sheet of suitable guage, purlins, J-hooks, bitumin washers, etc including painting work for protection against rain, the shade shall cover the entire area of the plinth of size 1.8x1.5x0.80M (LXBXH), of the Servo Stablizer (20 KVA) complete all as specified and as directed.

Supply and fixing GI pipe 40 mm bore, light grade with all fittings for cable/earth lead protection complete all as specified and directed. (Make : JINDAL/TATA/OSWAL/PRAKSH)

Material and Labour for construcion of plinth of size 1.8x1.5x1.00M (LXBXH) with PCC 1:3:6, Type C2 using 20 mm graded aggregate including brick work with old size sub class 'B' bricks, straight or curved on plan excd 6 Mtr mean radius built in cement and sand mortar 1:6 including rendering, for mounting of Transformers. Overall height of the plinth shall be 1.00 M(0.80M above ground level and 0.20M below ground level) complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in foundation, filling and mass concrete including demolition of existing foundation and removing from site complete all as specified and as directed.

Material & Labour for brick work with sub class 'B' bricks, locally available best quality, laid straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 including demolition of existing brick work complete all as specified and as directed.

Material & Labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for preparation of new plastered surface of wall and applying three coats of white wash complete all as specified and as directed.

Supply, Installation, commissioning and testing of Desert Cooler powder coated body of size 625mm x 625mm x 900mm height (25 inch X 25 inch X 36 inch Height) with side panels (03 Nos) fabricated out of 20 SWG (1mm thick) PGI sheet along with distribution switch, 5 amp piano switch and tank depth 275mm (11 inch), electric driven (single phase), 230 volts, 50 Hz, AC, fitted with submersible pump of suitable capacity, rotary switch (Step type, Speed Regulator), three core flexible copper conductor wire of size 1.5sqmm of not less than 1.5m length, wood wool pad on three sides and three speed exhaust motor of copper wounded, 450mm sweep complete all as specified and as directed by Engr-in-Charge. (Make : Crompton Cat No. 500MMCKM-MARKI or equivalent model/ cat No. of Bajaj/ Symphony/ Khaitan/ Kenstar)

M&L for self supporting stand for evaporative air cooler (Desert Cooler) of size (25" x 25" x 36") inch all as per the site requirement made out of angle iron of (25mm x 25mm x 4mm) including soldering/welding and required foundation, ground support all as directed at site to the entire satisfaction of department.

Material and labour for point wiring with 2.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including PVC casing caping (medium grade) of adequet size with all fittings and accessories including 2mm thick sunk MS pressed steel terminal boxes of appropriate size with 3.0mm thick plastic laminated sheet top cover with cadmium plated iron screws complete including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi stranded copper conductor cable of size 2.5sqmm green colour as earth continuty conductor connected to common earth dolly for one 15or16 Amps socket outlet points controlled by one, one way switch on independent board complete all as specified and as directed. (Make- ANCHOR/ LEGRAND/ SCHNEIDER/ CONA/ HAVELLS)

Supply and fixing Socket outlet 6/16 Amps, 2 in 1, 3 pin flush type complete all as specified and as directed. (Make:- ANCHOR/ LEGRAND/ SCHNEIDER/ CONA/ HAVELLS)

Supply and fixing switch piano, flush type, single pole one way 15/16 Amps, 230 volts complete all as specified and as directed. (Make:- ANCHOR/ LEGRAND/ SCHNEIDER/ CONA/ HAVELLS)

Supply and fixing galvanised steel tubing 15 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) fixed on wall or floor complete all as specified and as directed. (Make : JINDAL/TATA/OSWAL/PRAKSH)

Cutting of existing 15mm/20mm dia steel tubing for alterations or additions (Each cut measured) complete all as specified and as directed.

Supplying and fixing 15mm bore dia PTMT connection pipe of length 450mm including PVC washer on both side complete all as specified and as directed. (Make:- Prayag/ Polytuff)

Supplying and fixing 15mm bore dia gun metal gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.(Make: - KIRLOSKAR/ AUDCO/ LEADER/CASTLE/ NVR/ ZOLOTO).

SECTION - II

Supply, laying & fixing XLPE insulated armored heavy duty electric cable with stranded aluminum conductor, 1100 volts grade, cross- sectional area 25 sqmm 4 core laid on wall/ duct or floor including necessary clamps, cable lugs, glands, accessories etc. complete all as specified & as directed. (Make: RR KABLE LTD/ FINOLEX/ POLYCAB/ KEI INDUSTRIES LTD./ HAVELLS)

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cm x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI strip of 32 x 6 mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @100mm c/c both ways, one lifting handle made out of 10mm dia TMT bar 250mm long embedded in cover slab and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer of 15cm thick complete all as specified and directed. (Make of GI Pipe:-JINDAL/ TATA/ BST/ PRAKASH TUBES/ OSWAL) (Note:- Each protection pipe and earthing lead upto and including 7.5 meter lenght is deemed to be included in the qouted rate of this item.)

M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc using 32 x 6mm galvanised iron trip complete all as specified & as directed.

Saini Enterprises