REPAIR/ REPLACEMENT OF PLASTER, JOINERY, TILLING, CHAJJA, FLOORING, SUNKEN TREATMENT, PLUMBING AND ALLIED SERVICES AT SOMNATH ENCLAVE, ARUN KHETRAPAL, EAGLE ENCLAVE, MES INSTALLATIONS AND MD ACCN SARDHANA ROAD UNDER AGE B/R-II OF GE (NORTH) MEERUT CA

Amount

Taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 Sqm each (without taking off shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new frame complete all as specified and directed

Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new frame complete all as specified and directed

Taking down steel window / ventilator of any description and of any type and making good the disturbed portion complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but n. exc 2 sqm each complete all as specified and directed.

S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, winties for roof sheets, framing for monkey proofing, welded mesh, support to sign board & fencing post, etc as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 35mm thick made of 2nd class hardwood Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (b) for door shutter supplying and fitted to chowkats, complete all as specified and directed.

S&F for 30mm thick flush shutter solid core construction with block board core & ply wood face panels, commercial type on both faces complete all as specified and directed

S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded incl sliding door bolts, 150mm long ordinary mild steel rat rail rod pattern springs including roller plate complete (suitable for MAP Qtrs) (Sample kept in AGE B/R-II office) or as directed by Engr-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. Note: stainless steel butt hinges and necessary S S crews shall be paid separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F 100mm long SS dash fasteners complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F powder coated anodised aluminium sliding glazed window with three track / shutter, three shutter sliding with following specification complete all as specified and directed. (i) Window frame of cross section 101 mm x 44mm x 1.5mm thick (ii) Three way track for sliding shutter of cross section 91.8 mm x 31.75mm x 1.1mm thick (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick (iv) 4 mm thick tinded glass supeiror quality (v) IDPE rubber gasket for fixing of glass (vi) Locking cleats per shutter 1 Nos (vii) Sliding rollers per shutter - 02 Nos (viii) Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 for shutter 1 No (ix) Fixing of screw for frame with wall per window -08 Nos

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed

Hacking out old broken glass any size thickness from steel/aluminium/wooden frame including removing MS cleats punching or drilling out old glazing pins/springs etc complete all as specified and directed

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square n exc 0.50 sqm each pane complete all as specified and directed.

S&F 4.8mm thickness tinted glass ordinary quality exc 0.5 sqm in each pane and fixed with rubber gasket beading and aluminium channels in aluminium windows, bookcase/shelf with rollers, wheels, aluminum clips, screws etc and making good as per site requirement complete all as directed and specified.

S&F in repairs stainless steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed.

S&F butt hinges 100mm long stainless steel complete all as specified and directed.

S&F 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 200mm long aluminium anodised, barrel tower boltls of extruded sections and fixed complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F MS door springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate and fixing in MS frame or wooden frame complete all as specified and directed

Taking down and refixing door shutters of any description of area exc 1.0 Sqm but n.exc 2.0 Sqm each in the same opening including easing of door/window/cup board shutters for easy closing/ opening incl tightning of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed.

S&F in repairs for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 914 x 787 x 254 mm fixed with plugs and washers on wall complete all as specified and directed.

S&F in repairs for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 762 x 609 x 254mm fixed with plugs and washers on wall complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including waste coupling and waste pipe complete all as specified and directed.

S&F in repairs sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including waste coupling and waste pipe complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe complete all as specified and directed.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore.

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 300 ltrs, including 15 mm bore Ball PTMT brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including ball PTMT valve 20 mm bore, high pressure with polythene ball & float and dismantling of old water tank complete all as specified and directed.

M&L for 01 mm thick MS plain sheet for making modified lid of water tank as per sample kept in offcie of AGE B/R-II and fixed with 04 nuts and bolts for water tanks for water capacity n. exc 1000 ltrs all as specified and directed.

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including seat and cover and connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan one piece EWCs snow white with duraplast slim soft close seat cover size (670x355x755mm) including connection to outgoing pipe complete all as specified and directed.

S&F in repairs wall hung EWCs snow white with duroplast slim soft close seat cover including rag bolts and concealed cistern set as per site requirement and connection to drain or outgoing pipe complete all as specified and directed

S&F in repairs PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed.

S&F in repairs EWC seat cover with fittings (hinges) complete all as specified and directed.

S&F in repairs for Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets waste coupling and waste pipe (oval shape suitable for MAP Qtrs) all as specified and directed.

Demolition wall and ceiling boards (fibre,pulpinsulation etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed

S&F anodised aluminium snap grid of size 605X605mm for frame work for false ceiling including 1.5mm dia GI hangers complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building boards fixed or laid /inserted to timber /GI/aluminium frame work with screws complete all as specified and directed.

S&F in repairs 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms)

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs CP 15mm bore bib tap 2-in-1 cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs CP angle valve 15mm bore cast copper alloy fency type, chromium plated with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S&F in repairs swan neck Sink Mixer 15mm bore, cast copper alloy, with capstan heads, chromium plated, fancy type screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Wall mixer three way telephonic type chromium plated for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs centre hole basin mixer 15mm bore, cast copper alloy, chromium plated, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs PVC connection fibre reinforced 600mm long with brass check nuts and PVC washers at both ends complete all as specified and directed

S&F in repairs CP kitchen sink waste coupling of size 100mm complete all as specified and directed

S&F in repairs CP WHB waste coupling of size 32mm complete all as specified and directed.

S&F in repairs PVC waste pipe 32 mm dia complete all as specified and directed

S&F in repairs for cast copper alloy chromium plated shower rose 150mm complete all as specified and directed.

S&F in repairs of brass adjustable rod for centre hole WHB mixer inc round washers and packing as per site requirement complete all as specified and directed

S&F in repairs brass adjustable legs for wall mixer incl washers and packing as per site requriment complete all as specified and directed

S&F in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs corner glass shelf with bracket (suitable for MAP Qtrs) (Sample kept in AGE B/R-II Office) complete all as specified and directed.

S&F in repairs stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs stainless steel toilet papar holder chromium plated fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repairs acrylic bathroom corner shelf of (suitable for MAP Qtrs) (Sample kept in AGE B/R-II Office) fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs 16/18/20 inches long SS sliding channel for drawer complete all as specified and directed.

S&F in repairs 40 mm dia brass polished, bright finished cup board knobs fixed with nut screws and washer complete all as specified and directed.

S&F in repairs brass 2 levers mortice lock verticle type size 175mm with two S/S handles and all fixing components complete all as specified and directed.

S&F in repairs 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work ( including continouous piano hinges mild steel bright finish width of flap 30mm & 5mm thick 2nd class hardwood plain fillets rectangular around the shutter& front of shelves as per ground requriment) as in shelves, cup board, or similar items open edge of board fixed with 2nd class HW wooden beading fitted with nuts & bolts complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises complete all as specified and directed.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm (400x400mm), as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles laid over and including 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed.

M&L glazed ceramic tiles (coloured) 450mm x 300mm x 7mm thick/ 600mm x 300mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick in CM 1:4 complete all as specified and directed.

M&L Vitrified tiles 10mm thick (square/ rectangular) (Light shade) (Double charge) joint free area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed.

All as per description of Ser No 77 here-in-bfore but as in skirting laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Vitrified ceramic tiles 10mm thick (square/ rectangular) (Light shade) (Double charge) joint free area of each tile exceeding 0.42 sqm but not exceeding 1.0 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed.

All as described Ser item No. 79 here-in-before but as in skirting laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C-2 (40mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour (Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.

M&L for precast chequered cement concrete tiles of size 300x300x25mm thick, with grey cement and pigment, laid in floors with grey cement and joints filled with grey cement and pigment to match colour of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

S&F Multipurpose PVC Bath cabinet mirror 430mm x 330mm complete all as specified and directed.

S&F in repairs looking mirror SIZE 900 X 600 X 6MM (Suitable for MAP qtrs as per sample kept in AGE B/R-II Office) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed.

M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over 10mm thick rendering in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exceeding 6 CM mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with Sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 except bricks complete all as specified and directed. Note : Serviceable bricks obtained from ser item no 92 shall be reused.

Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on brick work other than fare surfaces in cement mortar 1:4 on walls/chajjas finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 10 mm thick on fare surfaces of brick work in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

M&L for 5mm thick rendering on concrete surface of ceiling with cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for applying 2mm thick wall care putty on walls complete all as specified and directed.

M&L for applying two coats of Premium acrylic oil bound distemper over smooth surfaces of walls complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of wallls/chajjas and applying two coat of cement base paint over a coat of chalk whiting, on plastered surfaces, prepara-tory to distempering complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying two coats of Acrylic exterior Emulsion paint (weather proof painting) using roller at any height complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying one coat of plastic emulsion paint over 10cm width or girth using roller for painting including over a coat of 2mm thick wall care putty wherever required complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of premium acrylic oil bound distemper over and including a coat of wall care putty interior grade wherever required complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for prepration of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed.

M&L for cleaning the surfaces using wire brush, remove existing paint, wall putty and remove the entire loose particles from the dampness surfaces of walls and applying Dampguard solution mixed with wall care putty as per manufacturer instrutions complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet incl ridges of any description as in roof and including removal from the site complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick(AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based Plain steel sheet .50 mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, Ridge and eaves board, fixed with self tapping screws as in specified complete all as specified and directed.

Dismantling unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S&F Rolled sections Fe 410 -W (grade E-250) quality-A as in main and cross beams, base plates, side supports, hip and jack rafters; purlins, winties where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting member as directed and specified and directed.

S&F in repairs single towel rail 600 mm long complete all as specified and directed.

S&F in repairs stainless steel towel rack with rail and hooks (suitable for MAP Qtrs as per sample kept in AGE B/R-II Office) complete all as specified and directed.

S&F in repairs MS door springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate and fixing in MS frame or wooden frame complete all as specified and directed

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe(minimum weight 20mm-210grms) complete all as specified and directed

S&F in repairs 15 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specifed and directed. (Minimum weight 15mm-142gms).

Cleaning of water tanks of capacity not exceeding 1000 litres by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified & directed

S&F in repairs 75/110mm bore PVC (SWR) Tee any radius complete all as specified and directed.

S&F in repairs 75 PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specieid and directed.

S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed.

Demolition of cement concrete in sunken portion including floor complete all as specified and directed

Material & Labour for Water proofing treatment to sunken floors of kitchen, toilets, bath and WC's etc shall be as under :- (i) Application of two component acrylic modified cementitious coating. (ii) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treaments and old coatings. Concrete subtrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coatings and achieve a gripping profile that is clean , dry and free from laitance and any other form of surface contamination. (iii) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 Putty/Dr. Fixit 302 SBR latex/Perma latex SBR/ FOSROC Nitobond SBR Latex/Asian Paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vaccum pressure if required. (iv) Dampen all surfaces immediatley ahead of application of Acrylic modified cementitious coating of Sika Top Seal-107/Brush Bond Fosroc/Dr. Fixit/STP/CICO. (v) Whilst the surface is still damp from saturation(S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal -107/Brush Bond Fosroc/Dr. Fixit/STP/CICO of viscosity as per manufacturer's instructions. (vi) Apply Glass Fabric sheet of Sika Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (vii) Once touch dry, applied second coat of Acrylic modified cementitious coating of Sika Top Seal-107/Brush bond Fosroc/Dr. Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (viii) Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat.

S&F in repair door closer hydraulically aluminium (extruded section body) designation No 3, universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

S&F in repair GI Tank nipple of 20mm/15mm bore 150mm long suitable for PVC storage tank of capacity upto 1000 litre complete all as specified and directed.

S&F in repairs sliding window lock for aluminium windows complete all as specified and directed.

S&F in repairs stainless steel grating 100 mm dia with/without waste hole over floor/Nani trap complete all as specified and directed.

S&F in repairs 140mm floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed.

Punit Jain (BID ID -3327037)

veer enterprises (BID ID -3326915)

S K CONSTRUCTION CO (BID ID -3333982)