Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC 1ST FLOOR P R COMPLEX AT ROAD GUWAHATI 781 001 | KAMRUP METRO | ASSAM | 781001 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹18.8 L+₹2.5 L (15.1%)Rejected-Finance HOUSE NO 29 A SIJUBARI NIZARA PATH PO PS HATTIGAON GUWAHATI 38 | KAMRUP METRO | ASSAM | 781038 | L2 | Rejected-Finance NOT VALIDATED | |
| 3 | L3₹20.8 L+₹4.4 L (27.1%)Rejected-Finance PRAGARI NAGAR BYE LANE 3 HOUSE NO 05 SATGAON UDAYAN VIHAR GUWAHATI 781171 | KAMRUP METRO | ASSAM | 781171 | L3 | Rejected-Finance NOT VALIDATED |
Tender Value
Refer Docs
EMD Value
₹36,100
Closing Date
1 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GUWAHATI
GE GUWAHATI, PO SATGAON, DISTT KAMRUP - 781027
PROVN OF CERTAIN MINOR AND REVENUE WORKS AT BASISTHA UNDER GE GUWAHATI
2022_MES_534347_2
GE/GUW/24/8219 OF 2022-23
Open Tender
Civil Works
Item Rate
150 days
GUWAHATI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE GUWAHATI
₹36,100
Yes
6 Oct 2022
6 Aug 2022
3 Sept 2022
6 Aug 2022
1 Sept 2022
20 Aug 2022
6 Aug 2022 - 13 Aug 2022
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft/loose soil complete all as specified and directed
S&F mild steel section posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including embeding in concrete including preperation of surfaces and applying one coat of red oxide, zinc chrome primer complete all as specified and as directed.
M&L for PCC (1:3:6) type D-2 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and as directed.
Fixing only Chain Link Fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of Mild Steel Binding Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.
Supply only Chain Link Fencing 100x100mm mesh Mild Steel Galvanised Wire, complete all as specified and as directed.
M&L Deformed/twisted Bars 10mm dia as Tie Bars, cut to length, bent to shape as required including cranking, bending, hooking Ends as required for Chain Link Fencing strengthing and fixing with Mild Steel Bolts, Nuts, etc. in Fencing Post, complete all as specified and as directed.
S&F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal nut, length of bolt exceeding 5cm and not exc 10cm long dia of neck 11 to 15mm complete all as specified and as directed.
S&F mild steel confirming to Fe-290(Gde E-165) framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ladder etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, including one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.
M&L preparing new Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint (First Grade) complete all as specified and as directed.
M&L preparing new Steel and Iron Surfaces of any description, not exc. 10 Cm width or girth when unconnected with other painting or when painted in different tint and applying Two coats of Synthetic Enamel Paint (First Grade) complete all as specified and as directed.
M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed
M&L rendering 15mm thick plastering in cement mortar (1:4) on on fair faces of brick work and finished the plastered surface fair and even without using extra cement.complete all as specified and as directed.
M&L preparation of new surface of any description and apply two coats of cement base paint over a coat of primer complete all as specified and directed
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and as directed.
Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting outcomplete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm layers in soft/loose soil complete all as specified and directed.
Removing excavated material (Soil) not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.
M&L Hardcore of gauge n exc. 63 mm, using broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M&L 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.
M&L 75mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in floor finished even and fair complete all as specified and as directed.
M&L Pre polished chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over cement screed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
M&L PCC (1:2:4) Type B-0 (using 12.5mm graded crushed stone aggregate) for coping including including weathering, slightly rounded or chamfered angles and throating, as directed including necessary formwork as required complete all as specified and as directed.
S&F for mild steel flat iron of any size for screwing wire mesh as in fencing post including necessary drilling holes and one shop coat of redoxide zinc chrome primer complete conforming to Fe 410 - 0 of FE 310 -0 complete all as specified and as directed.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in surface channels and drain complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and as directed.
Add to or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. Note:- Rate quoted is for adjustment of rate only for the actual size excuted at site for the item no 25 mentioned as above
M&L for TMT bar 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for Precast Reinforced cement concrete (1:2:4), type B1 (Using 20 mm graded stone aggregate)as in cover slabs shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item
S&F of exhaust fan metal body with louvers 380 mm sweep, 1400 RPM or more, single phase, 240 Volts, AC, 50 Hz and connecting up complete and provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan complete all as specified and as directed.
M&L surface point wiring for fan points controlled by one, one way switch complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC casing capping medium grade with accessories (ISI marked) fixed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LSH (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications, complete all as specified and as directed. Note:- Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles.
S&F Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.
S&F ceiling rose, PVC/ polycarbonate, isolated body, three terminals, complete all as specified and directed
M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or Fixed to poles or any other indicated situation for loop earthing etc. as required Copper strip 32 x 6mm complete all as specified and directed
S&F LED light fitting 1x 50 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed
M&L concealed point wiring for light/fan controlled by one, one way switch complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including stove enamelled steel conduit not less than 20mm dia with accessories concealed in in wall surfaces including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LSH (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , terminal box Connections of cable with MCBs or bus bar shall be done through proper size of copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost complete all as specified and as directed Note:- Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles.
M&L Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as directed
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Single pole & neutral with 200 amps rated bus bar, including blanking plates as required and flush to wall surface including making good the distrubed surfaces of walls as per existing surfaces and finishes, complete all as specified and as directed.
S&F MCB Single pole and Neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.
S&F MCB Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.
M&L Earthing complete with copper earth plate electrode 900 mm x 600 mm x 5 mm thick, buried directly in ground (earth pit not less than 3.15 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to copper earth lead strip of 32mm x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), Earthing shall be filled with crystalline conductive materials (CCM) filled in both sides of earth plate of 150mm thick layer having non corrosive properties with back filling of soil after mixing of soil and enrichment chemical consisting of aluminum silicate (50 Kg min) all around the earth plate and CMM with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, copper earth strip protected by 40 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of surplus spoil to a distance not exceeding 50 metre and necessary testing on completion complete all as specified and as directed.
M/S SEWAK SINGH
MAC ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .