certain repairs to steel doors rooling shutter roofs concrete surface at ADM area guard post and certain sheds at 39 FAD Bharatpur Mil Stn

Amount

M&L for removal of existing treatment by taking out loose/spalled out waste material by chiselling chippings etc from beam, wall, columns, band etc. including use and waste of form work and providing steel wire fabric mesh of size 75mm X 75mm of dia 3.15mm fixed by L shaped mild steel shear key welded with existing reinforcement and providing 75mm thick concrete (1:1.5:3) type 0 using graded stone aggregate of 10mm maximum size mixed with polymeric admixture with pressure nozzle (guniting) and finishing the surface in CM (1:3) surface finished even and smooth without using extra cement and removing the debris outside MD land complete all as specified and directed. Note:- Quoted rates shall deemed to be inclusive of all form work and scaffolding or other handy T&P required to make up proper shape and size of columns/ Pillars, beam and wall partition etc.

M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt,oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application , rerpair all cracks by cutting V groove and fill with PMC mortar ( polymer modified cement mortar ) prepared in ratio as per manufacturers specification provide 75mm x 75mm coving made out of PMC mortar as above on all joints of vertical upstand to ensure that moisture content in the prepared surfaces does not exceed 5% immediately before application of liquid membrane. Material incorporation & PROTECTION BE PROVIDED AS TERRASHEILD FIRST APPLY WITH WATER ( RATIO TERRASHEILD: WATER will be 4 : 1) as primer with coverage area 0.1kg per Sqm. After 2-3 hours later, second step apply directly first coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 kg per Sqm with roller. spread non woven geo textile of 40/50gsm with overlap of 50mm in both direction when the surface is still tacky. After 4-6 hours later, apply third step apply directly second coat of terrasheild 0.30 to 0.40 mm thicknbess coverage area 0.5 to 0.75 kg per Sqm with roller. Final thickness of complete treatment should be min 1.0mm. water tank and khurra location one additional coat of terasheild .30 to .40 mm thickness coverage area 0.5 to 0.75 kg per Sqm be provideds. after complete application will be done authorised applicator from manufacturer and manufacturer's applicatiuon complete all as specified and directed.

M&L for screed bed or bedding layer of cemnt mortar 1 : 4, 20mm thick finished even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and directed.

M&L for 75mm thick Cement concrete type B-1, 1 : 2 : 4 (20mm graded aggregate) as in floors, pavings etc and finishing even and smooth ( without using extra cement ) complete all as specified and directed.

M&L for greasing and easing of rolling shutter of size not exc 13 Sqm alongwith the guide channel, helical spring, anchoring and all other as to work the shutter in eary way and complete all as specified and directed.

M&L for preparation and two coat of synthetic enamel paint over old steel & iron Surfaces of any description, over 10cm in width or girth,complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick masonary or concrete surface of wall, finished even & smooth, without using extra cement, including taking down, raking out joints, hacking for key, scrubbing down with water etc of cement plaster, complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) mixed with WPC but on other than fair faces of brick wall, finished even & smooth, without using extra cement , including taking down, raking out joints, hacking for key, scrubbing down with water etc of cement plaster, complete all as specified and directed. complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

Supply only Integral WPC complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated, semi corrugated or trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and directed.

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and directed.

S&F in repair for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame or stone or concrete or bricks surrounds glazed with putty, taking out old pins punching or drilling out, complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane including punching or drilling out old glazing pins/spring clips, and providing & fixing new ones complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying thouroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior weather proof paint in camouflaging pattern with roller application over one coat of water based white pigmented akali resistant priming paint for external wall , complete all as specified and directed.

Complete removal of existing treatment on Wall including washing rubbing down and stopping of distempered and painted surface and preparing old surface applying thouroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior weather proof paint in camouflaging pattern with roller application over one coat of water based white pigmented akali resistant priming paint for external wall over 1mm thick white external wall cement putty , complete all as specified and directed.

M&L preparation of new plastered surface and applying two coat of distemper oil emulsion over one coat of water based white pigmented alkali resistant priming paint over 1 mm thick internal wall care putty conforming to IS:109-1968 white or tinted on ceiling & wall complete all as specified and directed.

Complete removal of existing treatment on walls including washing rubbing down and stopping of distempered and painted surface and preparing old surface applying two coats of oil bound over one coat of alkali resistant primer over 1 mm thick internal wall care putty incl preparing by rubbing etc complete with roller application complete all as specified and dirercted.

Complete removal of existing treatment on ceiling including washing rubbing down and stopping of distempered and painted surface and preparing old surface applying two coats of oil bound over one coat of alkali resistant primer over 1 mm thick internal wall care putty incl preparing by rubbing etc complete with roller application complete all as specified and dirercted.

Tulsi Enterprises (BID ID -3124643)

M/S MAMTA CONSTRUCTIONS (BID ID -3127326)

M/s S. K. Construction Co. (BID ID -3127288)

M/s Gupta Traders (BID ID -3126400)

M/s Ranaji Construction Co (BID ID -3125885)

GOVIND CONSTRUCTION (BID ID -3125399)

CHUNNU CONSTRUCTION ASSOCIATES (BID ID -3131198)