Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC HOUSE NO 22 BHAGADUTTAPUR BELTOLA RUKMINIGAON ROAD GUWAHATI 781028 | KAMRUP METRO | ASSAM | 781028 | L1 | Accepted-AOC OK | |
| 2 | L2₹10.0 L+₹68,947 (7.41%)Rejected-AOC | L2 | Rejected-AOC OK | |
| 3 | L3₹10.2 L+₹93,311 (10.0%)Rejected-AOC | L3 | Rejected-AOC OK | |
| 4 | L4₹10.7 L+₹1.4 L (15.2%)Rejected-AOC | L4 | Rejected-AOC OK |
Tender Value
Refer Docs
EMD Value
₹19,800
Closing Date
1 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AF Digaru
AGE (I) AF Digaru PO Digaru Dist Kamrup Assam 782401
REPAIR/REPLACEMENT OF DOORS/WINDOWS JOINERY, ROOF SHEETS AND CONNECTED ITEMS AND OTHER MISC B/R WORKS AT SMQ AREA AND HQ AREA AT AF STN DIGARU.
2022_MES_535823_1
8572/E8 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
Digaru
MES contractor enlisted as class E cat a(i) having deposited standing security of Rs 29,700/- with dept.
5 documents required · 5 mandatory
₹500
Yes
AGE (I) AF Digaru
₹19,800
Yes
22 Aug 2022
5 Jul 2022
3 Aug 2022
5 Jul 2022
1 Aug 2022
20 Jul 2022
60 days
Amount
Taking down chowkhats or frames not exceeding 1.5 sqm each with shutter (without taking of shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutter (without taking of shutters from the frames) complete all as specified and directed.
Taking down shutter of any description area exceeding 1 sqm and not exceeding 2 Sqm each complete all as specified and directed.
S&F for 2nd hard wood for plain solid straight chowkats & frame wrought framed related on the solid rounded or chamfered, put together with glue pined at joints complete all as specified and directed
S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on the both side complete all as specified and directed.
S&F 35mm thick glazed and skeleton shutter open rebated and prerepair to receive glass, gauge etc without sash bars, edge of framing, plain/chamfered or rounded, fitted with cut and metered beads with first 2nd class hard wood complete all as specified and diredted.
Ditto as per Item No 6.00 above but divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube Supplying & Fixing in opening as per specification and drawing, including making good (such as rendering and white wash matching to exixting surface) to the existing surfaces complete all as specified and directed.
S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing shown on page -156 of MES SSR Pt-II complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 125 mm long complete all as specified and directed.
S/F Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S & F 100mm stainless steel butt hinges
S & F 75mm stainless steel butt hinges
S&F 150 mm aluminium alloy handels cast/plate type
S&F 125 mm aluminium alloy handels cast/plate type
S & F floor door stopper of aluminium alloy body and tongue, anodised 150mm long with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium anodised fillets with screws complete all as specified and directed.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeing 0.5 Sqm in each pane complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Powder coated ( Min thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified and directed.
S&F Powder coated ( Min thickness of powder coating 50 micron) Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F Powder coated ( Min thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m icluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
M/S TRADE CENTRE
M/s Dhruv Enterprises
M/S DAS CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .