Job 3 Repair of Govt. Sr. Sec. School Lower Dehlan Distt. Una Sub Head P.A Distempering, Plaster, Roof repair etc Deposit Work

Amount

Earth work in excavation by mechanical means( hydrolic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. All kind of soil including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto any leads and lifts also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters buttresses,plinth and string courses and the like including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness in all floor level including carriage of material entire within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (one Cement : three coarse sand): six graded stone aggregate 40 mm (forty millimetre) (twenty millimetre) nominal size) as directed by Engineer-in-charge including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in all work upto plinth level including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying 60mm(sixty millimetre) thick factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge cement concrete paver block of M-35 grade with approved colour, design &patternof NTC make including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in all work upto plinth level and the like and mass concrete in all depth/heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Steel reinforcement (Sail/RINL/Shyam steel Tisco, Jindal panther (JSPL) make)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6(one cement: six sand ) including curing complete in any depth/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make, in all colours, shades except ,white, lvory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) or as directed by the Engineer-in-charge of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size, with toop and bottom rail of T-iron 40x40x6mm , with 40mm dia steel pulleys, complete with bolts , nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fastr lugs or with dash fasteners of required dia and length( hold fast lugs or dash fastener shall be paid for separately) sal wood including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Renewing glass panes, with wooden fillets wherever necessary float glass panes of nominal thickness 4mm (weight not less than 10kg/ sqm) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty float glass panes of nominal thickness 4mm( weight not less than 10kg/ sqm) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixig panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per drection of Engineer-in-charge (Butt hinges and necessary screws shall be paid separately) kiln seasoned and chemically treated hollock wood 35mm thick shutters including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm. and under including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

15mm (fifteen millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Distempering with Ist quality acrylic distemper (Ready mix) VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade Old work (One or more coats) (Neolac/Assian/Dulux/Berger) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on wood/ steel surface (One or more coats on old work) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Finishing walls with water proofing cement paint of required shade on Old work( One or more coats @ 2.20 kg/ 10 sqm) complete (Neolac/Assian/Dulux/Berger) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and applying white cement(Birla white/JK) wall putty based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Finishing walls with with water proofing cement paint of shade (Neolac/Assian/Dulux/Berger)having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 3.84 kg./ 10 sqm. . including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruted built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary fillng up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P.brass/stainless steel screws , all complete as per architectural drawings and the directions of Engineer-in-charge(Glazing paneling and dash fasteners to be paid for separately For fixed portion powder coated aluminium(minimum thickness of powder coating 50 micron) including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruted built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary fillng up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P.brass/stainless steel screws , all complete as per architectural drawings and the directions of Engineer-in-charge(Glazing paneling and dash fasteners to be paid for separately For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherevr required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minium thickness of powder coating powder coated aluminium(minimum thickness of powder coating 50 micron) including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the the directions of Engineer-in-charhe(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5mm thickness(weight not less than 12.50kg/sqm) including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete upto all floor level including carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i)250×16mm(two hundred fifty into sixteen millimeter)

Providing and fixing anodized aluminium tower bolts ISI marked anodized anodic coating not less than grade C 10 as per IS: 1868 transparent or dyed to required colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. i)150×10mm(one hundred fifty into ten millimetre)

Providing and fixing anodized aluminium tower bolts ISI marked anodized anodic coating not less than grade AC 10 as per IS: 1868 transparent or dyed to required colour or shade with necessary screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. i)100×10mm(one hundred into ten millimetre)

Providing and fixing aluminum handles ISI marked anodized anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . (a)125mm(one hundred twenty five millimeter)

Providing and fixing aluminum handles ISI marked anodized anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .. (a)75mm(seventy five millimetre)

Writing letters or figures on any surface with black japan paint. Indian (letters / figures) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

RAJEEV KUMAR MENON

RADHA RAMAN

ANKIT SHARMA

VIKAS SHARMA