Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest tender | |
| 2 | L2₹16.5 L+₹4,494.50 (0.27%)Rejected-Finance | L2 | Rejected-Finance Not being lowest tender | |
| 3 | L3₹17.0 L+₹52,756 (3.21%)Rejected-Finance | L3 | Rejected-Finance Not being lowest tender | |
| 4 | L4₹19.3 L+₹2.8 L (17.0%)Rejected-Finance | L4 | Rejected-Finance Not being lowest tender | |
| 5 | L5₹20.3 L+₹3.9 L (23.5%)Rejected-Finance | L5 | Rejected-Finance Not being lowest tender |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
12 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TA
GE AF TA GWALIOR -474020
REPAIR / MAINT OF SHORT RANGE, SINGPUR RANGE AND CERTAIN MISC REPAIR WORKS IN TECH AREA AT AF STN GWALIOR
2022_MES_569263_1
8900/1430/GWL/E8
Open Tender
Civil Works
Item Rate
240 days
GE AF TA GWL
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF TA GWALIOR
₹50,000
Yes
23 Feb 2023
15 Dec 2022
20 Jan 2023
15 Dec 2022
12 Jan 2023
29 Dec 2022
15 Dec 2022 - 28 Dec 2022
Amount
Cutting of all bushes ,grass and sarcandas, shrubs, vegetation etc including trees n.exc 30 cm girth and removing the material exc 500m and n.exc 1 KM complete all as specified and directed.
Ploughing to existing ground with mechanical devices n.exc. 15cm in depth spill cross (double) or both way and leveling the target area with surrounding area soil complete all as specified and directed. Note : For ploughing to existing ground, both side (ie one side and cross) shall be measured as one complete operation.
Supply only Sand (passing through 4.75 mm IS sieve) for Fd Target area/ Firing Butt all as specified and directed by Engineer-in-charge.
M&L for Supply of Saw dust and mixing with sand in particular ratio as per user requirement for spreading on Fd Target target area complete all as specified and directed. Note: Supply of Sand and Filling of Mixture on Fd Target Area shall be measured and Paid Searately.
Forming earthen band above ground level including raising of sand and saw dust mixture, ramming and finishing of top surface up o a height of 6 mtr manually or machenically to required slope complete all as specified and directed by Engr-in-charge .
Supply only waste slaked lime in fine powder in polythene bags to singpur range complete all as specified and directed.
Demollition of cement concrete (unreinforced) including floor tiles, ground floors and pavings n. exc 15 cm thick below or above G.L and removing to a distance n.exc 50m from starting point complete all as specified and directed .
M&L for 50 mm thick plain cement concrete (1:3:6) type C2, using 20 mm graded stone aggregate as in Plinth protection and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M&L for Cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in kerbs, haunching, rounded or chamfered on edges, coping , floor finishes etc incl necessary form work complete all as specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring for levelling course complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for non skid coloured ceramic tiles 7-8mm thick area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick rendering on brick work or concrete surface other than fair faces in CM 1:4 complete all as specified and directed.
M&L for Non - skid ceramic premium tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement match with tiles over 15mm thick screed bed in CM 1:6 to complete all as specified and directed.
All as per item No.14 here-in-before but as in skirting etc. but over 10 mm thick rendering or bedding in layer of mortar fo in cement plaster 1:4 complete all as specified and directed.
M&L for 10mm thick designer parking/foopath vetrified tiles of size 300x300mm any colour and pattern, jointed and pointed on neat cement slurry as in floors including 20 mm thick screed bed in CM (1:6) complete all as specified and directed. Make: DUROTA, JOHNSON, ORIENT, SOMANY
Demolition of stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid in any type of mortar complete all as specified and directed.
M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in floors, steps, pillar, platform or oval shape wash hand basin including cutting to fit the WHB, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base for flooring, Hard standing etc complete all as specified and directed.
M&L for 80mm thick factory made cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, over and including 30mm thick compacted bed of fine sand/stone dust compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
S&F in repairs 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic ) sheets decorative finish to existing false ceiling grid complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed incl demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.
All as per item No. 23 here-in-before but except bricks.
Taking down old cement plaster on brick surface or concrete including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering on brick masonry walls in CM 1:4 finished even and smooth without using extra cement
M&L for Preparation of newly plaster surface of wall and applying two coat of distemper oil emulsion over a coat of chalk whitening (preparatory to distempering) white or tinted as approved all as specified and directed.
M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emulsion white or tinted over a coat of primer as approved complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified & directed.
Taking down chowkats with shutters (without taking off shutters from the frames) of any description n. exc 1.5 Sqm each complete all as specified & directed
Taking down chowkats with shutters (without taking off shutters from the frames) of any description exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified & directed
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with galvanized wire staples/ wooden beading to wooden/steet window/vents complete all as directed.
M&L for preparing of new wood surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and dircted.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), With Wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F 100 mm Butt hinges, medium weight, stanless steel (ISI Marked), fix to PVC door frame etc complete.
S&F 100mm Extruded aluminium alloy powder coated fabricated handles (D Type) fixed to door /windows shutter with sctewscomplete all as specified.
S&F 100 Aluminium powder coated, barrel tower bolts of extruded section and fixed to door / widow shutter with sctews complete all as specified.
S&F Powder coated aluminium frame for door, window, ventilators and partitions with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.
S&F Powder coated aluminium door shutters with extruded built up standard tubular sections using aluminium section not less than 2.00 mm thick, (shutter with styles 85mmX44.45mm, top rails 83.5mm X 44.45mm , intermediate rail 83.5mmx44.45mm, bottom rail 114.3mmx44.5mm) jointed with jointing cleats, nut bolts and screws including rubber neoprene gasket and aluminium beading for fixing glass & ACP Sheet complete, all as specified and directed by Engr-in-Charge.
S&F Powder coated aluminium sliding windows shutters with extruded built up standard tubular sections (using aluminium sec not less than 1.5mm thick), fixing to frame includig rubber neoprene gasket and aluminium U channel, 02 Nos sliding rollers at bottom, locking arrangement to each shutter using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.
S&F 5mm thick tinted glass, and glazing in squre/rectangular aluminium shutters/frames complete all as specified and directed.
S&F 4mm thick tinted glass, and glazing in squre/rectangular aluminium shutters/frames complete all as specified and directed.
S&F 4mm thick ACP (Aluminium composite pannel) coloured sheet with 0.25 mm thick of aluminium coil, sandwitch pannel as in alumiium doors/wall claddings with sealent and necessary hidden screws complete all as specified and directed. Make:- REYNOBOND, ALUDECOR, ALSTRONG, ALSTONE, ALEXPANEL
S&F 150mm long Extruded aluminium alloy handles, fabricated type, complete all as specified and directed .
S&F 150mm long aluminium barrel tower bolts, of extruded section complete all as specified and directed .
S&F 250 mm long aluminium alloy, anodised , sliding door bolt with hasp , staple ( bolt type ) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified & directed
S&F in repair rubber neoprene packing to aluminium door and windows for fixing glass including removing of beading and refixig the same in its position complete all as specified and as directed.
S&F 100 mm Butt hinges, extruded aluminium alloy powder coated with galvanised mild steel hinge pin, anodised and fixed, type C-21.
S&F in repairs 5mm thick glass, and glazing in squre exc 0.50 Sqm to aluminium frame with suitable beading in each pane at any height complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Framed work such as in door frame, window grills, hung type grilled gates, grating,etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; , including MS hinges/ pintle hinges, stops, hand-made sliding bolts, etc. railings, framework of watertanks and similar work conforming to Fe.290.Gde-E-165
S&F Mild steel sections for shed, trussed, rafters, purlins, vertical post and fastenings and framing (Beam, tee, angle, channel or flat sections) includingwelding necessary drilling holes and distance pieces, cleats etc. complete all as specified and directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150, of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismentling of existing Plain or corrugated steel complete all as specified and directed.
M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repairs 18mm thick plywood of both side laminated wood grain to make cupboard/cabinet shutter/drawer front shutters complete as per specifications and as directed by the Engineer-in-charge.
S&F 100mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws .
S&F Stainless steel handles 100mm size decorative type for kitchen cabinets/ cub boards shutters as per specifications and as directed by the Engr in charge.
S&F in repair 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.
S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), P- Type/ S-Type any colour (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.
S&F in repairs PVC Seat cover for water closet pan (pedestal pattern), matching colour including fixing bolts. Make: Hindware, parryware, Cera
S&F in repair Vitreous China urinals half stall flat back white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including Brass CP waste coupling and 32mm Brass CP waste coupling with PVC waste pipe & Grating complete all as specfied and directed.
S & F in repair vitreous china wash basin, white, flat back size 550 X 450mm including 32mm Brass CP waste Coupling, PVC Waste pipe and Grating complete all as specified and directed. Make: Hindware, parryware, Cera
S&F 15mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. including taking down old unserviceable pipe, complete all as specified and directed
S&F 20mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. including taking down old unserviceable pipe, complete all as specified and directed
M&L for Cutting chases for concealed water tubing or concealed conduit wiring, etc. making good to facings where required and pointing in cement mortar 1:3 not exc 10 cm girth complete all as specified and directed.
S&F in repair for 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.
S&F in repair for 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.
S&F in repair 110mm PVC(SWR) bends complete all as specfied and directed.
S&F in repair 110mm PVC(SWR) junction single, (Single T) eual or unequal complete all specfied and directed.
S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S&F in repair PVC connection of size 15mm with nuts of length 450mm complete all as specified and directed.
S&F in repair chromium plated fency type bib taps long body cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed.
S&F in repair 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs Brass CP, fancy type 15mm bore Angle Cock with crutch or butterfly handle, screwed both ends for iron pipe.
S&F in repairs Brass CP, fancy type 15mm bore Cocealled stop cock with crutch or butterfly handle, screwed both ends for iron pipe.
S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) and Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms)
Dismantling of old PVC water tanks with float valve and S&F 500 lit capacity rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position with 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 1 0 g m s) complete all as specified and directed.
S&F in repairs 3mm thick sheet glass, ordinary quality and glazing with oil putty in squre n exc 0.50 Sqm in each pane at any height complete all as specified and directed
S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with necessary beading and nut bolts to steel windows/vents etc complete all as specified and as directed.
M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of weather coat exterior emulsion paint including filling cracks/depressions with putty/POP to make the adjacent surface even and smooth complete all as specified and directed. [Make:- Asian Paints 'ACE' , Berger weather coat Wallmasta paints or equivalent in Nerolac paints].
M&L for Preparation of old decorated surface of wall include brooming down with steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, including filling the cracks and depressions and applying one coat of distemper oil emulsion with roller as approved complete all as specified and directed.
M&L for Preparation of old decorated surfaces of wall by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of white wash complete all as specified and directed.
Ditto as per item No 87 here-in-before but one coat of white wash on ceiling surface
M&L for Preparing old painted wooden surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girth complete all as specified and directed.
M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Cleaning sewage line, rodding thoroully, watering complete removing blokages all as specified and directed.
Cleaning man holes, up to 1.5mtr depth, removing sluge, watering complete all as specified and directed.
M&L for double Glazed soundproof vacuum toughned glass overall 22mm thick (5mm outer trasparent glass, and 5mm inner tinted glass) with aluminium spacer 12mm with filled with moisture resistant chemical, sealed with sealent to Aluminium frames for fixing at ATC Tower etc at any height including taking down old broken glass from metal frames complete all as specified and directed by Engr-in-charge.
S&F in repairs 4mm thick ACP (Aluminum composite pannel) for fixing to aluminum dors /partions with rubber neoprene packing and aluminium beading complete all as specified and directed.
M&L for 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling hanger section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
M&L for grinding and polishing (Granite finish polish) to existing marble and kota stone flooring/ skirting including minor repair work and filling the joints with cement and pigmet etc complete all as per directed by Engineer-in-charge.
M/s Jai Durga Construction
JAY PRAKASH SHARMA
R.B. ENTERPRISES
MAHARAJ KUNWAR SAHAB CONSTRUCTION
JNK BOND
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .