SPECIAL REPAIRS TO BUILDING NO P 06 (DOCKYARD DISPENSARY INDUSTRIAL CANTEEN DAS OFFICE AT NAVAL DOCKYARD UNDER GE NW KUNJALI COLABA MUMBAI

Amount

Demolition brick work or stone / boulder masonry, including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles built in cement mortar complete all as specified and directed

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed

Dismantling wrought iron or mild steel works of any description work etc.

Taking down chowkats or frame with shutter (without taking off shutter from frame), not exceeding 1.5 sqm each complete all as specified and directed

Taking down chowkats or frame with shutter ( without taking off shutter from frame), exceeding 1.5 sqm but not exceeding 4 Sqm each complete all as specified and directed

Taking down shutters only of any description not exceeding 1.00 sqm each complete all as specified and directed

Taking down 15 mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

All as per item No 7 above but 20 mm bore GI Pipe.

All as per item No 7 above but 25 mm bore GI Pipe.

All as per item No 7 above but 40 mm bore GI Pipe.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and directed

Taking down rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-neck etc. complete

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed

Taking down cement plaster on brick wall / concrete surface including taking out joints hacking for key scrubbing down with water etc in any position complete all as specified and directed

Demolition of plain cement concrete of any description and in any position and remove debris outside from MD land.

Disconnecting existing tanks, exceeding 500 & not exceeding. 1000 liters capacity, setting aside (or lowering if required) for repair, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed

All as per item 17 above but exceeding 1000 & not exceeding. 2000 liter capacity.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.5 m in depth for foundation etc in hard / dense soil complete all as specified and directed

Material & labour for hard core of broken stone or boulders of gauge n.exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed

Material & labour for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed

Material & labour for RCC M-25 design mix (using 20 mm graded stone aggregate) as in footing, foundation and plinth beams etc complete all as specified and directed

Material & labour for RCC M-25 design mix (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed

Material & labour for RCC M-25 design mix (using 20 mm graded stone aggregate) as in beams, cantilevers, bressumers, lintels, over 1.50 m span etc complete all as specified and directed

Material & labour for RCC M-25 design mix (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors and roof etc and the like complete all as specified and directed

Material & labour for RCC M-25 design mix (using 20 mm graded stone aggregate) as in Chajjas complete all as specified and directed. Note for item No 22 to 26 :- RCC M-25 design mix shall be got approved from Government Approved Lab / Government Engineering Collage / NABL / SEMT Pune

Material & labour for Material & labour for form work to sides of concrete foundations, footings, bases of columns and raft beams, side and soffits of foundation and plinth beams of rough finished surfaces of concrete complete all as specified and directed

Material & labour for form work to sides of pillars, posts, struts, piers, columns and stanchions (square / rectangular) complete all as specified and directed

Material & labour for form work to sides and soffits of floor or roof beams etc complete all as specified and directed

Material & labour for form work to soffits of suspended slabs, such as roof slab, floor slabs, landing and similar work n.exc 200 mm thick complete all as specified and directed

Material & labour form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide fair finished surface complete all as specified and directed

Material & labour for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter complete all as specified and directed

All as per item No 32 but 6 to 8 mm diameter as in stirrups .

Material & labour for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter complete all as specified and directed

Material & labour for brick work with sub class 'B' bricks, straight or curved on plan not exceeding 6 m mean radius and built in CM (1:6) complete all as specified and directed

All as per item No. 35 above but half brick thick wall built in CM (1:4) complete all as specified and directed

Material & labour for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finishing the surface even and smooth finish complete all as specified and directed

Material & labour for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth finish complete all as specified and directed

Material & labour for plastering in CM (1:4), 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and fair complete. complete all as specified and directed. Note :- WPC will be measured and paid seperately

Material & labour for water proofing plaster for sunken portion in CM (1:3), 15 mm thick in two coats using Pidiproof LW+ water proofing chemical of Dr. Fixit or equivalent as per manufacturer's instruction and finishing the surface even and smooth without using extra cement. Note :- Water Proofing Chemical shall be measured and paid separately

Material & labour for water proofing treatment of sunken floor / wall surfaces by applying two coats of water proofing chemical and cement mix in ratio 1:1.5, (PIDICRETE UPR or equivalent approved water proofing chemicals), complete all as specified and directedall as per manufacture's instructions and as directed. Make : Dr. FIXIT, Chemisol, Choksy Chemicals

Material & labour for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling (sunken portion) etc complete all as specified and directed

Material & labour for 40mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, using Pidiproof LW+ water proofing chemical of Dr. Fixit or equivalent as per manufacturer's instruction, as sub floor complete all as specified and directed. Note :- Water Proofing Chemical shall be measured and paid separately

Supply only integral water proofing compound.

Supply only Water proofing chemical Pidiproof LW+ of Dr. Fixit or Equivalent.

Material & labour for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as roof kerbs / padding, using Pidiproof LW+ water proofing chemical of Dr. Fixit or equivalent as per manufacturer's instruction etc complete all as specified and directed. Note :- Water Proofing Chemical shall be measured and paid seperately

Material & labour for the roof surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive bituminous primer, apply bituminous based cold applied primer @ 270 to 300 gms/Sqm manufactured by the same agency as that of APP all as per manufacturers instructions. Laying 5 layered, 4 mm thick APP (A tactic poly propylene) modified membrane reinforced with 180 GSM (Gms/Sqm) of non woven polyester mat, applied by thermo fusion using LPG torch on the bottom portion of the membrane with an overlap of 75mm in longitudinal direction .

Material & labour for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM (1:3) complete all as specified and directed

Making the Chajjah tops surface clean, free from dust dirt, grease, oil, followed by applying 2 coats of approved Rubberized / polymer water proofing treatment POLY ALK WP or equivalent of approved make as per the manufacturer’s specifications

Supply & fix welded steel wire fabric, cut to length, fixed to steel members / reinforcement steel, weigh per Sqm not exceeding 4 Kg complete all as specified and directed

Material & labour for taking down, chipping and removing the loose, spilt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement, wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM (1:3) mix , 40mm thk in two coats, using polymer as per manufacturer's instructions complete all as specified and directed. Make : Dr. Fixit/Sunanda/chemestik/Fosrok Note :- New reinforcement and MS Sections will be measured and paid separately

Material & labour for preparation of existing surfaces of roof top, RCC Gutter and parapet wall, crack filling with prime seal chemical and cement @ the ratio of 1:4, applying two coats of water proof chemical (Newcoat of dr. fixit or equivalent) and finally applying a coat of SBR latex and silicon powder paste not less than 2 mm thick complete all as specified and directed

Material & labour for providing grouting 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams and columns as co-ordinal points for inserting/pouring mixture of Lw+, high proof chemicals and cement slurry by pressure grouting for column, beams and slabs, includind sealing the holes with CM (1:3) complete all as specified and directed

Supply only micro concrete. Make : Dr. Fixit/Sunanda/chemestik/Fosrok

Supply only polymer SBR Latex or equivalent as approved. Make:- Dr. Fosrok, Sunanda, Dr. Fixit

Supply & fix rotational moulded polyethylene water storage tanks of capacity 500ltr (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tanks and remove to store complete all as specified and directed

All as per item 56 above but 1000 liter capacity.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc

Material & labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) 75mm thick as in sub base complete all as specified and directed

Material & labour for cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) 40mm thick as in flooring & finishing the surface even and smooth without using extra cement complete all as specified and directed

Material & labour for vitrified ceramic tiles 10 mm thick (square / rectangular) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the dark shade of the tiles, with and including screed bed in CM (1:6), 20 mm complete all as specified and directed

All as per item No 61 above but as in skirting including 10mm thick rendering in CM. 1:3 as backing coat etc complete all as specified and directed

Material & labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 20mm thick screed bed in CM (1:4) complete all as specified and directed

Material & labour for Coloured glazed ceramic tiles in vertical surface 450 X300X7mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed

Material & labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types incl screed bed or bedding layer or mortar 15mm thick in CM (1:4) layer of mortar for laying floor finishes complete all as specified and directed

Material & labour for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Extra over granite stone slabs for edge polishing / chamfering / noising / grooves / bevelling etc complete all as specified and directed

Material & labour for Kota stone slab 20 to 25mm thick in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over a backing coat 10mm thick in CM (1:4) complete all as specified and directed

Material & labour for Kota stone slab 20 to 25mm thick in steps, jambs, pillars, window sides, jambs, cills and cooking platform and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over a backing coat 10mm thick in CM (1:4) complete all as specified and directed

Material & labour for mirror polishing of existing kota stone flooring, steps, skirting etc complete all as specified and directed

Supply & fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe-410-W (Gde-250, quality-A) complete all as specified and directed

Supply & fix for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quality-A, as in post, runners, rafters, purlins etc fixed with connecting plates including bending, welding etc complete all as specified and directed

Supply & fix for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quality-A, as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets including bending, welding etc complete all as specified and directed

Supply & fix for mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting plates, base plate etc. welding etc complete all as specified and directed

Supply & fix pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screws as specified.

Supply & fix rain water gutter in half round shape 160mm dia PVC ( SWR) grade pipes single socketed in any length with integral outlet of 160 mm dia complete all as specified and directed

Supply & fix 3 mm thick aluminium composite panel cladding plain of approved colour / shade to beam / column / slab in circular / rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on col / beam / slab to hold ACP cladding etc. Note:- Colour/ Pattern of ACP sheet shall be given by GE

Supply & fix false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as specified and directedall as per manufacturer's instruction. Make :- Everest or equivalent as approved by GE

Material & labour for Stainless steel decorative railings (design and pattern as approved) made out of SS pipes, SS flats, SS plates etc with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed

Material & labour for gently cleaning the surface of the stone masonry and piers with specialized water misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface, without over wetting, followed up by gentle brushing with soft nylon brushes as specified. Gentle surface cleaning may include using water misting and mild pH balanced surfactants as specified for indicated areas to remove surface dirt, grit, surface accretions, lime wash etc by means of water misting and pH balanced surfactants and cleaning as directed by Engineer - in- Charge. Note:- Quoted rate shall be inclusive of application of transparent polyurethane paint over stone masonry as per the manufactures instruction over a coat of primer and removing vagetation on wall surfaces, chajjas etc and erection and dismantling of MS tubular double scaffolding up to Eight storey building and provision of necessary safety equipments to the skilled workers to carry out work complete all as specified and directed

Material & labour for Raking out cement pointing or any other hard material used and careful re-pointing and repair to be carried of the damaged pointing to walls externally and internally above the base of vaults and apse domes for poor joints, in lime mortar 1:3 (1lime, 3 sand mix to be approved by Consultants before application) and filling in of any holes/damage areas of stone that may have to be filled in lime mortar. Pointing to be carefully colour matched using additives such as kattha, sand, stone dust and such additives to exactly preparation of batches of samples upto 20 samples of colour matched lime mortar for approval by Engineer-in-Charge. The contractor to ensure use of masking tape and sharp specialized spatulae and tools to ensure clear lines and high level of workmanship on site all as specified and as directed by Engineer- in- Charge

Supply & fix solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing.

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification and drawing.

Supply & fix for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

Supply & fix 35 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed

Supply & fix plain framed factory made panelled shutter 35mm thick 2nd class HW rail and style (two panel) with lock rail and panel of 2mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part I), Kiln seasoned and chemically preasure treated.

Supply & fix powder coated aluminium frame / shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, screws, handles, hinges, tower bolts etc. complete all as specified and directed Make: JINDAL/HINDALCO/INDALCO. Note :- (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

Material & labour for aluminium anodized grill with suitable anodized aluminium frame of F/H section with suitable fixing screws/attachment etc all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill all as per manufacturer's specifications.

Supply & fix 4 mm thick bakelite sheet with decorative choice laminated on both side complete all as specified and directed

Supply & fix 12 mm thick Medium density fibre board, exterior grade both side decorative choice laminations, fixed to timber/ Aluminium frame work with screws complete all as specified and directed

Supply & fix 6 mm thick non asbestos fibre cement building fixed or laid / inserted to timber/GI/Aluminium framework with counter sunk screws finish with jointing compound and jointing tape as per manufacturer' instructions

Supply & fix 4 mm thick figured glass, pin headed type, in squares not exceeding 0.5 Sqm in each pan.

Supply & fix for sun control film, 50 micron non reflective type, sticked to glass as per manufacturers instructions and as directed by Engineer-in-Charge. Make - Garware or equivalent as approved by GE

Supply & fix for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed

Supply & fix aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, unversal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

Supply & fix aluminium anodised sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

Supply & fix Stainless Steel but hinges 100mm size

Supply & fix aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and directed

Supply & fix extruded aluminium anodised alloy handles, fabricated type 150mm size complete all as specified and directed

Supply & fix 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed

As per item No 101 above but 20mm dia medium GI Pipe.

As per item No 101 above but 25mm dia medium GI Pipe.

As per item No 101 above but 40mm dia medium GI Pipe.

Supply & fix in reapirs 50mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed walls, ceilings or in floors etc complete all as specified and directed

Supply & fix 160mm dia PVC (SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes bends etc. Note:- Measurment shall be taken along the centre line of the pipes

Supply & fix 110mm dia PVC (SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls or laid in flloors/trenches complete all as specified and directed

Supply & fix 75mm dia PVC (SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls or laid in flloors/trenches complete all as specified and directed

Supply & fix 110mm dia PVC (SWR) grade double T with access doors including fixing clips complete all as specified and directed

All as per item No 109 above but 75mm dia

Material & labour for in repairs PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvent cement complete all as specified and directed

Supply & fix in repairs white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc complete all as specified and directed

Supply & fix in repair white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc complete all as specified and directed

Supply & fix in repairs vitreous china urinals, bowl type, flat back, size 465X355X265mm, white, with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and Union for discharge pipe complete all as specified and directed

Supply & fix in repair 10 litres capacity PVC low level flushing cistern of approved make including ball valve, syphon set, inlet and outlet pipe complete all as specified and directed

Supply & fix in repair white glazed earthen ware vitreous china wash hand basin of size 550 x 400 mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed

Supply & fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

Supply & fix in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and directed

Supply & fix in repair chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange complete all as specified and directed

Supply & fix in repair PVC Connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed

Supply & fix in repair brass chromium plated shower rose 125mm size complete all as specified and directed

Supply & fix in repairs 15 mm bore dia of pipe, brass chromium plated fancy type bib tap complete all as specified and directed

Supply & fix in repairs 15mm size stop valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed

Material & labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) 100 mm thick as in sub base complete all as specified and directed

Material & labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with & incl 50 mm thick sand cushioning complete all as specified and directed

Material & labour for preparation of newly plastered surfaces of wall & ceiling applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and directed

Material & labour for preparation of newly plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.

Material & labour for preparation of new wooden surfaces of any description, over 10 cm in width or girth, applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed

Material & labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Material & labour for Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material & labour for Preparation of old painted steel surfaces of any description not otherwise over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material & labour for removal of existing treatment on wall surfaces and applying one coat of Birla white wall care putty, sanding the surfaces till even and smooth finish and applying one coat of wall primer and finally applying two coats of oil bound distemper of approval tint complete all as specified and directed

Material & labour for Preparation of old plastered or unplastered decorated surfaces of wall including cornices, pillasters etc and applying one coat of white wash on walls complete all as specified and directed

All as per item No 134 above but in ceiling.

Providing and erecting two legged mild steel tubular scaffolding, of width 1200 to 1500 mm largely free standing using H frames or mild steel tubular pipes of minimum 40 mm diameter with base plates, fixed or adjustable with necessary clamps, couplers, brackets for projections, joints pins, pullies and other accessories including steel angle or tubular pipe bracing at dequate intervals, access platforms of metal or timbers planks of span not exceeding 2.5 meters, including access ladders with intermediate platforms. The scaffolding is to be suitably braced and anchored to the building using support system created temporarily at the opening in the walls using vertical and horizontal details on the entire building face, required and safety platforms at ground level covering the entrances to the building. Item includes Providing and erecting Nylon Net covering fixed to the exterior face of scaffolding including duct tape with safety signage ' work in progress' and ' caution' boards at the ground level and demercations of entrances to the building. The measurement will be calculated by multiplying the length of the two legged units at the centre line of the 1200-1500 mm scaffolding rates will include for the cross bracing between the rows of the scaffold units.

Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/ structure, all as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding). Make :- Krishna Conchem Products Pvt Ltd or Sika or equivalent as approved

Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing / refilling of joints, including disposal of rubbish to the dumping ground within 50 metre lead.

Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding) Make :- Krishna Conchem Products Pvt Ltd or Sika or equivalent as approved

Ruled / Flush pointing on White sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding).

Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sunlight by suitable means during application complete all as specified and directed as per direction of the Engineer-in-Charge (The rate is inclusive of all materials & labours involved except scaffolding). Make :- Krishna Conchem Products Pvt Ltd or Sika or equivalent as approved

Returning, filling in, including spreading, levelling, watering and well ramming in layer n.exceeding 25 cm in soil

Removal of excavated materials, debris, old concrete, spoils etc exceeding 5 Km but not exceeding 15 Km complete

Taking down carefully old unserviceable point wiring copper/Aluminum (light/ fan /sockets/power) complete all as specified and directedwith switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge

Material & labour for point wiring complete all as specified and directedwith 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping not less than 25mm with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including Modular box and cover plate at required number etc complete all as specified and directed. Notes: a) Electrical wiring above false ceiling shall be drawn Trough medium grade PVC conduit.

(a) One light point controlled by one 5A switch

(b) One Fan point controlled by one 5A switch

(c) One 5A flush type switch socket point on same board board

(d) One 5A flush type switch socket point on independent board

(e) One Bell point controlled by one bell push

Material & labour for point wiring complete all as specified and directedwith proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete all as specified and directedfor One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately.

Material & labour for point wiring complete all as specified and directedwith 4 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with metallic ISI make terminal boxes fix on wall including one PVC insulated & unsheathed multistranded copper conductor 4.0 Sq. mm as earth continuity conductor connected to common earth dolly for single board having 2 x 5Amps and 1 x15 Amp switch socket point on the same board ( for Computer ) including moduler box with cover plate all as specified Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

Supply & fix ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular switch 1 way 6A all as specified and directed by Engineer-in-Charge.

Supply & fix modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed by Engineer-in-Charge. Make: Roma plus/Legrand.

Supply & fix modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed by Engineer-in-Charge.

Supply & fix modular switch 1 way 16A,1 module all as specified and directed by Engineer-in-Charge. Make: Roma plus/Legrand.

Supply & fix for modular fan step regulator, 120W - 2 modular all as specified and directed by Engineer-in-Charge. Make: Anchor/Roma plus/Legrand

Supply & fix lamp holder PVC/polycarbonate insulated body type complete all as specified and directedall as directed.

Supply & fix bell, DINGDONG, 240 volts, SP complete all as specified and directedall as directed.

Supply & fix modular Bell push, flush type, 5 amp all as specified and directed by Engineer-in-Charge. Make: Roma plus/Legrand.

Supply & fix in repirs LED light fitting 1x10W, 230 V, 2 feet surface monted box type, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc complete all as specified and directedwith all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed by Engineer-in-Charge. Make : CG/Bajaj cat No BCLSB 10WH/Wipro

Supply and fixing in repair new generation slim recessed LED 2X2 Luminaire 36 watt CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting to modern offices. Suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and directedall as specified & directed by Engineer-in-Charge.Make : CG/Bajaj cat NoBZRSQL 36W GZi /Wipro/

Supply & fix in repirs new generation suspension mounted 2x18 W LED pendent luminnaries and high translucent diffuser provides high quality economic energy saving lighting including suspension of 1.5 mtr (set of 02 Nos) complete all as specified and directedfixing arrangement all as specified and directed. Make : Bajaj cat No BLRB DB 218/C&S/Wipro

Supply & fix LED retrofit lamp B-22 holder base with polycarbonate diffuser and aluminium heat sink 0.5 W complete all as specified and directedall as directed. Make : C&S/BAJAJ/Wipro

Supply & fix in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar. Make: Legrand/ Seimens/GE

Supply & fix in repair MCB DB double door SPN 4 Way with 200 Amps rated copper bus bar. Make: Legrand/ Seimens/GE

Supply & fix in repair of double door type vertical type TPN DB 6 Way ,240V with 200A busbar , double door type IP-54 IK 09 protection suitable for housing MCCB's all as specified and directed by Engineer-in-Charge.Make: Legrand /Seimens/GE. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

Supply & fix in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete all as specified and directedwith one single pole MCB 20A all as specified and directed by Engineer-in-Charge.

Supply & fix in repair of sheet metal enclosure single pole box,without bus bar 240V suitable for housing SP MCB all as specified and directed by Engineer-in-Charge. Note : MCB DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding. MAke : Legrand/Seimens/GE

Supply & fix in repairs of MCCB sheet metal enclosure for holding MCCB of 160 Amps capacity four pole type including fixing accessories etc complete all as specified and directed. Make : Legrand Cat No 507801/GE/Seimens

Supply & fix MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts,10 KA including making connection complete all as specified and directedall as directed.

Supply & fix MCB, SPN, 40 to 63 Amps capacity, C Curve type suitable for 240 volts 10 KA including making connection complete all as specified and directedall as directed.

Supply & fix MCB SP 40 Amps,10KA 'C' series 240V complete all as specified and directed. Make : Legrand/Seimens/GE

Supply & fix MCB TP 63 Amps,10KA 'C' series 415V complete all as specified and directed. Make : Legrand/Seimens/GE

Supply & fix MCB TP 40 Amps,10KA 'C' series 415V complete all as specified and directed. Make : Legrand/Seimens/GE

Supply & fix MCCB 415 volts, 160Amp 4 pole of 16 KA ICS= 100% ICU with fixed thermal magnetic setting including spreader terminal of suitable size and making connections complete all as specified and directedall as specified & directed. Make : Legrand Cat No 420016/Seimens/GE

Supply & fix MCCB 415 volts, 125Amp 4 pole of 16 KA ICS= 100% ICU with fixed thermal magnetic setting including spreader terminal of suitable size and making connections complete all as specified and directedall as specified & directed. Make : Legrand Cat No 420016/Seimens/GE

Material & labour for sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC caping casing not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Plaza/Finolex

Material & labour for sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC caping casing not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/Plaza

Material & labour for sub-main wiring with 2 runs of 10.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC caping casing not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 10.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

Taking down Submain wiring any size and any run complete all as specified and directedand making good the distrubed surface matching with existing surface all as directrd by Engineer-in-Charge.

Disconnecting & taking down, strip opening, cleaning all parts and packing of ceiling fan/Exhust/wall mounted fan of any make and size & greasing ball bearing with specified quilty grease all as specified.

Material & labour for hanging ceiling fan/Exhust fan in position & re-comissioning the same including making electric connection complete all as specified and directedall as specified & directed

Preparation of painted surfaces of ceiling fan of any make & size & applying one coat of synthetic enamel white paint by spray painting complete all as specified and directedall as specified & directed by Engineer-in-Charge.

All as per srl No 147 above but gray paint/green for exhust fan/Wall mounted fan size & make all as specified.

Fabrication and fixing of ceiling fan hooks and clamp with nuts ,bolts and washers and complete all as specified and directedworks required at site for fixing of hooks all as specified and directed.

Supply & fix Ceiling fan 1200mm sweep, suitable for operation on 230 / 240 V. 50 Hz, single phase, A.C, supply complete all as specified and directedincluding connecting up with 3 core flexible cord of size 23/0.0076mm from ceiling rose to fan all as specified and directed Make : Havells/

Supply & fix exhaust fans in metalic body with powder coated paint , Single piece plastic blade AC Single Phase 230 V capacitor run motor of size 300 mm sweep (Heavy duty), including louvers/shutter and cutting hole of suitable size & making good the surface to match with surrounding. connecting up 3 core flexible cord of size 23/0.0076mm from ceiling rose to exhaust fan all as specified and directed. Make : Usha/Havells

Supply & fix GI cable tray perforated type, 2mm thick of size 150x50mm to be fixed on any wall (brick/stone) vertically/horizontally including all accessories complete all as specified and directedbending, shaping, drilling welding, cutting and including all fixing arrangement such as suitable cable tray shall be "SNP controls", "National" or equivalent.

Suppl,fixing pre fabricated GI clamp suitable for fixing/supporting og 150x50mm size cable trays complete all as specified and directedwith buzzer bolts/hold fastener complete all as specified and directed. (Note rate quoted by the contractor deemedto be included the making the good to the didturbed surfaces to match with the existing).

Supply and fix 3mm thick aluminium composite panel cable trunking for plain of approved colour shade as required including suitable size of revits/nut bolts complete all as specified and directedbending, shaping, drilling, cutting, notching and all as specified and directed by Engineer-in-Charge.

Earthing complete all as specified and directedwith galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised earth wire of size 4mm dia means of bolts, nuts check nut & washers of galvanised iron or steel & connected to main switch including complete all as specified and directedexcavation and earth work in soft/loose soil and disposal of surplus soil to a distance not exc 50 meters, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh, 20mm bore light grade galvanised iron or steel pipe for water, charcoal or coke and salt in alternative layers of 15cm compacted thickness all round the earth electrode complete all as specified and directedalll as shown in electrical plate No 5 of SSR part-I including welding with suitble electrode and testing complete all as specified and directedall as directed.

Supply & fix galvanised iron strip 25 x 4 mm or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed by Engineer-in-Charge.

Material & labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised ironor steel wire all as specified and directed by Engineer-in-Charge.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35sq mm 3.5 core. laid in trench/ duct / along pole/wall tc including making connection complete all as specified and directedall as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is including in quoted rate and no extra payment will be made for it.

Dismantling existing perished LT panel indoor type including connected switch gears, cables etc and Supply , fabrication , installation, testing & commissioning of LT panel board in door type, made out of 2mm thick CRCA sheet ,Dust and vermin proof, front and back openable, having Aluminium bus bar of capacity 600 amps for phase and 300 amps for neutral duly insulated with heat shrinkable insulation as per the colour code R,Y,B, powder coated painting, internal wiring with suitable size of stranded copper conductor cables, foundation, extension legs, cable glands, cable termination etc, complete all as specified and directedincluding dismatling old panel and suitable to accommodate the following accessories:-

a) MCCB 250 Amps ,4 pole having repturing capacity of 36 KA - 1 No (incoming) b) MCCB 160 Amps, 3 pole having repturing capacity of 16KA - 1 Nos (Out going) c) MCCB 100 Amps, 3 pole having repturing capacity of 16KA - 2 Nos (Out going) d) MCCB 63 Amps, 3 pole having repturing capacity of 35KA - 1 Nos (Out going) e) Indication lamps (R,Y,B) LED type - 1 set f) Volt meter 0 -500 V, digital -1 No g) Ammeter with CT's digital - 1No Note : The quoted rate is inclusive of the following :- (i) MCCbs, suitable copper control wiring inside PB, cable galands ,cable lugs, Digital ammeter / voltmeter, 0-500 A, 0-500 V,LED type indicator lamps (R,Y,B), supporting insulators etc. and name the distribution with stickering/painting. (ii) Disconnecting existing cable from old panel and connecting to new panel including earth work and foundation if required. Make of MCCB : Legrand/Seimens/GE

Garima Construction Co