Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.5 CrAccepted-AOC 885 RADHAPURAM MAIN ROAD VADAKKANKULAM 627116 TIRUNELVELI DISTRICT | TIRUNELVELI | TIRUNELVELI | TAMIL NADU | 627116 | ₹1.5 Cr | 1 | Accepted-AOC L1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical Reason for Technical disqualification The nature of work is not match with similar nature of work. Therefore as per clause No. 1.1 of prequalification Criteria of NIT, this work is not qualified. |
| 3 | Rejected-Technical F4 RAINBOW COLONY SREE HARI TOWER VANDALUR MAIN ROAD KELAMBAKKAM KANCHIPURAM TAMIL NADU 603103 UDYAM TN 08 0010152 33AAFCN0041C1ZA B R | CHENGALPATTU | TAMIL NADU | 603103 | - | - | Rejected-Technical Reason for Technical disqualification The nature of work is not match with similar nature of work. Therefore as per clause No. 1.1 of prequalification Criteria of NIT, these works are not qualified. |
| Sl No | Description | Qty | Unit | S.A.V.Constructions L1 |
|---|---|---|---|---|
| 1.00 | Providing and applying prime coat using slow setting bitumen emulsion conforming to IS:8887 on prepared surface of granular base including clearing the road surface and spraying primer at the rate of 6kg/10sqm, as per clause 502 of MORT & H specifications complete in all respects | 730 | Sqm | 55 ₹40,150 Lowest |
| 2.00 | Providing and applying tack coat using bitumen emulsion conforming to IS:8887 using emulsion pressure distibuter including preparing the surface & cleaning with mechanical broom. with rapid settling emulsion on bitumen surface @ 0.25kg/sqm. as per clause 503 of MORT & H specifications complete in all respects . | 19,710 | Sqm | 25 ₹4,92,750 Lowest |
| 3.00 | Providing and laying Dense graded bituminous macadam 50 mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 4.0 to 4.5% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 507 of MORT & H specifications complete in all respects. | 37 | Cum | 9,000 ₹3,33,000 Lowest |
| 4.00 | Providing and laying bituminous concrete 40mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 5.4 to 5.6% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 509 of MORT & H specifications complete in all respects. | 789 | Cum | 9,900 ₹78,11,100 Lowest |
| 5.00 | Providing and applying 2.5mm thick road marking trips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per drawings and specifications | 600 | Sqm | 500 ₹3,00,000 Lowest |
| 6.00 | Providing and Fixing reflective road studs of ‘category B’ Raised pavement markers made out of poly carbonate/ABS moulded body and reflective panels(bi-convex reflectors) with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro-reflectance and chromaticity values conforming to ASTMD4280. The reflective raised pavement markers shall also confirm to the MORTH circular no RW/NH.33023/10/97-DOIII dt 11.06.97 and the length ,height and width of the body shall not be less than 100mm,15mm and 90mm and base of marker shall be flat within 1.3mm. The marker shall support a load of 13635Kg tested in accordance with ASTM D4280. Lenses shall be moulded of polycarbonate of methyl methecrylate conforming to ASTM D788. The area of each retro –reflector surface shall be 35+5 degree to base. Each reflector shall have a CIL not less than values specified in table2 of said MoRT &H circular and 2 cylindrical polymer shanks of not less than 20mm diameter and not less than 30mm length shall be provided for better anchorage etc complete as per drawings and specifications Each reflector shall have a CIL not less than values specified in table2 of said MoRT &H circular and 2 cylindrical polymer shanks of not less than 20mm diameter and not less than 30mm length shall be provided for better anchorage etc complete as directed by Engineer in charge. | 420 | Nos | 500 ₹2,10,000 Lowest |
| 7.00 | Providing and applying prime coat using slow setting bitumen emulsion conforming to IS:8887 on prepared surface of granular base incl;uding clearing the road surface and spraying primer at the rate of 6kg/10sqm, as per clause 502 of MORT & H specifications complete in all respects | 1,750 | Sqm | 55 ₹96,250 Lowest |
| 8.00 | Providing and applying tack coat using bitumen emulsion conforming to IS:8887 using emulsion pressure distibuter including preparing the surface & cleaning with mechanical broom. with rapid settling emulsion on bitumen surface @ 0.25kg/sqm. as per clause 503 of MORT & H specifications complete in all respects . | 14,000 | Sqm | 25 ₹3,50,000 Lowest |
| 9.00 | Providing and laying Dense graded bituminous macadam 50 mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 4.0 to 4.5% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 507 of MORT & H specifications complete in all respects. | 350 | Cum | 9,000 ₹31,50,000 Lowest |
| 10.00 | Providing and laying bituminous concrete 40mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 5.4 to 5.6% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 509 of MORT & H specifications complete in all respects. | 175 | Cum | 9,900 ₹17,32,500 Lowest |
Tender Value
₹1.2 Cr
EMD Value
₹2.5 L
Closing Date
22 Jan 2025, 5:00 pmClosed
Chief Engineer E - US
KKNPP
Re-surfacing of road in Plant site and patrolling road along the property wall at KKNPP 1-2
2024_NPCIL_221688_1
NPCIL/KK 1-2/CONST/CIVIL INFRA/PT/2024/186
Open Tender
Civil Works - Roads
Works
365 days
Work
Pre Qualification Details Available in Tender document
3 documents required · 3 mandatory
₹0
₹2.5 L
CMM Works Group
12 Sept 2025
28 Dec 2024
25 Jan 2025
28 Dec 2024
22 Jan 2025
8 Jan 2025
28 Dec 2024 - 3 Jan 2025
4 Jan 2025
Amount
Providing and applying prime coat using slow setting bitumen emulsion conforming to IS:8887 on prepared surface of granular base including clearing the road surface and spraying primer at the rate of 6kg/10sqm, as per clause 502 of MORT & H specifications complete in all respects
Providing and applying tack coat using bitumen emulsion conforming to IS:8887 using emulsion pressure distibuter including preparing the surface & cleaning with mechanical broom. with rapid settling emulsion on bitumen surface @ 0.25kg/sqm. as per clause 503 of MORT & H specifications complete in all respects .
Providing and laying Dense graded bituminous macadam 50 mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 4.0 to 4.5% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 507 of MORT & H specifications complete in all respects.
Providing and laying bituminous concrete 40mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 5.4 to 5.6% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 509 of MORT & H specifications complete in all respects.
Providing and applying 2.5mm thick road marking trips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per drawings and specifications
Providing and Fixing reflective road studs of ‘category B’ Raised pavement markers made out of poly carbonate/ABS moulded body and reflective panels(bi-convex reflectors) with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro-reflectance and chromaticity values conforming to ASTMD4280. The reflective raised pavement markers shall also confirm to the MORTH circular no RW/NH.33023/10/97-DOIII dt 11.06.97 and the length ,height and width of the body shall not be less than 100mm,15mm and 90mm and base of marker shall be flat within 1.3mm. The marker shall support a load of 13635Kg tested in accordance with ASTM D4280. Lenses shall be moulded of polycarbonate of methyl methecrylate conforming to ASTM D788. The area of each retro –reflector surface shall be 35+5 degree to base. Each reflector shall have a CIL not less than values specified in table2 of said MoRT &H circular and 2 cylindrical polymer shanks of not less than 20mm diameter and not less than 30mm length shall be provided for better anchorage etc complete as per drawings and specifications Each reflector shall have a CIL not less than values specified in table2 of said MoRT &H circular and 2 cylindrical polymer shanks of not less than 20mm diameter and not less than 30mm length shall be provided for better anchorage etc complete as directed by Engineer in charge.
Providing and applying prime coat using slow setting bitumen emulsion conforming to IS:8887 on prepared surface of granular base incl;uding clearing the road surface and spraying primer at the rate of 6kg/10sqm, as per clause 502 of MORT & H specifications complete in all respects
Providing and applying tack coat using bitumen emulsion conforming to IS:8887 using emulsion pressure distibuter including preparing the surface & cleaning with mechanical broom. with rapid settling emulsion on bitumen surface @ 0.25kg/sqm. as per clause 503 of MORT & H specifications complete in all respects .
Providing and laying Dense graded bituminous macadam 50 mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 4.0 to 4.5% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 507 of MORT & H specifications complete in all respects.
Providing and laying bituminous concrete 40mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 5.4 to 5.6% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 509 of MORT & H specifications complete in all respects.
Providing and applying 2.5mm thick road marking trips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per drawings and specifications
Providing, laying, spreading and compacting graded stone aggregate (size range53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge, as per clause 406 of MORT & H specifications complete in all respects.
Applicable GST Rate (%) Included in the Quoted Price
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .