Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.0 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹15.6 L+₹24,995 (1.63%)Rejected-AOC | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹15.8 L+₹42,010 (2.73%)Rejected-AOC | L3 | Rejected-AOC not found lowest | |
| 4 | Rejected-Technical | - | Rejected-Technical docs not submitted |
Tender Value
₹16.7 L
EMD Value
₹33,500
Closing Date
23 Sept 2021, 6:00 pmClosed
GE BASOLI
GE BASOLI
REPAIR,PAINTING AND POLISHING OF ALL TYPES OF WOODEN/STEEL FURNITURE FOR BASOLI AND JANGLOT AT BSO YARD UNDER GE BASOLI
2021_MES_469971_1
GE/BAS-27/2021-22
Open Tender
Miscellaneous Works
Item Rate
180 days
GE BASOLI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BASOLI
₹33,500
Yes
10 Jan 2023
23 Aug 2021
24 Sept 2021
23 Aug 2021
23 Sept 2021
7 Sept 2021
Amount
REPAIRS TO TABLE 3' X 2' WITH / WITHOUT DRAWER STEEL (FD-1007 & FD-1008):-(For ser No 01 to 04) Material and labour for replacement of top of table 3’ X 2’ with / without drawer steel with 18/19 mm thick PPB melamine face (exterior grade) one side teak face ISI marked and shall be fixed teak wood beading 4 mm thick all round the frame all as per drawing complete all as specified and directed .Make - Action Tesa, Kitply, Novapan
Material and labour for replacement damaged drawer with lock of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding shown on drawing complete all as specified and directed .
Material and labour for preparation of surface and welding to broken place complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of black colour ,complete all as specified and directed.
REPAIRS TO TEAPOY VERANDAH (FD-35 & other):- (For ser No 05 to 08) Material and labour for replacement of top of teapoy verandah with 18/19 mm thick PPB (exterior grade) both side white face ISI marked and shall be fixed teak wood beading 4 mm thick all round the frame all as per drawing complete all as specified and directed. Make - Action Tesa, Kitply, Novapan
Material and labour for replacement of damaged legs by 19/20 mm square tube / conduit pipe of wall thickness 1.6 mm and welding complete all as per shown on drawing complete all as specified and directed .
Material and labour for preparation of surface and welding to broken place complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of as per existing colour as approved complete all as specified and directed..
REPAIRS TO TABLE OFFICE CLERK STEEL:- FD-1004 ( For Srl Item No 9 to 14) Material and labour for replacement of top of table office clerk steel of size 1160 mm x 570 mm with 18/19 mm thick pre laminated Particle board (exterior grade)one side teak face ISI marked and shall be fixed teak wood beading 4 mm thick half round all round the frame as shown on drawing complete all as specified and directed . Make - Action Tesa, Kitply, Novapan
Material and labour for replacement damaged drawer and sliding ararngment of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged legs of 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing complete all as specified and directed
Material and labour for replacement of unserviceable lock of drawer with new lock of 6 Lever 65 mm of approved quality with duplicate key complete all as specified and directed.
Material and labour for preparation of surface and welding to broken place complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of as per existing colour as approved complete all as specified and directed.
REPAIRS TO TABLE OFFICE OFFICER STEEL:- FD-1003 ( For Srl Item No 15 to 22) Material and labour for replacement of top of table office officer steel of size 1680mm x 870mm with 18/19 mm thick pre laminated Particle board (exterior grade)one side teak face ISI marked and shall be fixed teak wood beading 4 mm thick half round all round the frame as shown on drawing complete all as specified and directed. Make - Action Tesa, Kitply, Novapan
Material and labour for replacement of damaged drawer of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed
Material and labour for replacement of damaged box complete with locking arragements of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged long rail/centre stiffener by 25 mm square tube of wall thickness 1.6 mm and welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged Short rail /short stiffener by 25 mm square tube of wall thickness 1.6 mm and weldingas shown on drawing complete all as specified and directed.
Material and labour for replacement of unserviceable lock of drawer with new lock of 6 Lever 65 mm of approved quality with duplicate key.as shown on drawing complete all as specified and directed.
Material and labour for preparation of surface and welding to broken place complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of black colour as per existing as approved.as shown on drawing complete all as specified and directed.
REPAIRS TO CHAIR CB STEEL WITH ARM AND WITHOUT ARMS- FD-75 (M)( For Srl Item No 23 to 31 ) Material and labour for replacement for seat of chair CB steel with arms duly painted with two coats of synthetic enameled paint of black colour and 2mm wide 0.4 mm thick white plastic cane and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm as shown on drawing complete all as specified and directed.
Material and labour for replacement for Back of chair CB steel with arms duly painted with two coats of synthetic enameled paint of black colour complete as per Godrej pattern with 2mm wide 0.4 mm thick white plastic cane and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm as shown on drawing complete all as specified and directed.
Material and labour for replacement for seat of chair CB steel without arms duly painted with two coats of synthetic enameled paint of black colour and 2mm wide 0.4 mm thick white plastic cane and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm as shown on drawing complete all as specified and directed.
Material and labour for replacement for Back of chair CB steel without arms duly painted with two coats of synthetic enameled paint of black colour and 2mm wide 0.4 mm thick white plastic cane and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm as shown on drawing complete all as specified and directed.
Material and labour for Flat Iron stiffener of size 25mm x 3mm size, 500mm long fixed to frame by welding for fixing of seat and back of chair CB steel with arms as shown on drawing complete all as specified and directed.
Material and labour for Flat Iron stiffener of size 25mm x 3mm size, 420mm long fixed to frame by welding for fixing of seat and back of chair CB steel without arms as shown on drawing complete all as specified and directed.
Material and labour for replacement of PVC cap with new PVC cap for 20 mm dia pipe of approved quality of conduit frame of chair CB steelas shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged arm of chair CB steel duly painted with two coats of synthetic enameled paint of black colour as shown on drawing complete all as specified and directed.
Material and labour for preparation of surface and welding to broken place complete all as specified and directed
REPAIRS TO ALMIRAH MEDIUM STEEL WITH SHELVE -FD-67M 350,351& FD-1032,1031 (For Srl item No 32 to 39) Material and labour for Supply and fixing new lock of suitable size provided with duplicate keys as per sample, fixed with screws including taking down old unserviceable lock of almirah medium steel complete all as specified and directed..
Material and labour fixed in repair for locking device with cover of almirah steel large including lock bar complete all as specified and directed.
Material and labour fixed in repair for door shutters by denting and necessary adjustment as required complete all as specified and directed.
Supply and fixing for new chromium plated handle, fixed with screws including ,taking down old unserviceable handle of almirah medium steel complete all as specified and directed.
Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of almirah medium steel complete all as specified and directed.
Supply and fixing for new shelves made out of 1 mm thick mild steel black sheet made to shape including taking down old unserviceable shelves of almirah medium steel complete all as specified and directed.
Material and labour for prepartion of welded steel surfacs of externally/ internally with putty ready for painting for denting to old chipped surfaces complete all as specified and directed.
Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.
REPAIRS TO LOCKER STEEL (FD-127,222,1029)( For Srl Item No 40 to 45) Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of locker steel complete all as specified and directed.
Material and labour for replacement for old damaged hasp and staples with new hasp and staples chromium plated safety type 100mm long of approved quality complete all as specified and directed.
Supply and fixing for new chromium plated handle, 100 mm size of approved quality fixed with screws including taking down old unserviceable handle of locker steel complete all as specified and directed.
Material and labour for prepartion of welded steel surfacs of externally/ internally with putty ready for painting for denting to old chipped surfaces complete all as specified and directed.
Supply and fixing for replacement of new chromium plated hanging rod of locker steel shape & size complete all as specified and directed.
Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.
REPAIR TO TABLE DINING (ORS) (FD-165M):-(for Srl item No 46 to 49) Replacement of top of table dining for OR’s with 18/19 mm thick pre laminated Particle board (exterior grade)one side teak face ISI marked and shall be fixed teak wood beading 4 mm thick half round all round the frame all as per drawing,complete all as specified and directed . Make of board Bhutan Board,Kitply,Century.
Material and Labour for replacement of damaged legs 25 mm square tube of wall thickness 1.6 mm and welding all as per shown on drawing ,complete all as specified and directed
Material and Labour for replacement of short stiffener and short rail with 25 mm square tube of wall thickness 1.6 mm welded to frame all as per shown on drawing ,complete all as specified and directed
Material and Labour forr replacement of hard rubber shoe of black colour and match as per existing complete all as per shown on drawing and specified
CHARPOY GI PIPE WITH PLY TOP FD-220,386: (For ser No 50 to 52)Material and Labour for replacement of 12 mm thick Plywood top on existing charpoy GI pipe after tightening/ repairing of frame/charpoy . plywood shall be 12 mm thick, commercial type, BWR grade, ISI marked of Make : Century ply/ Archid ply / green ply/ Kit Ply in single piece with teak wood beading all around.Plywood shall be fixed to charpoy frame with and including nuts, bolts and GI washers (minimum 12 Nos. per charpoy), dia of bolt not less than 8mm complete all as specified and as directed .
Material and Labour for replacement stiffeners made of 25mm Sq MS Conduit pipe 1.6 mm thick and welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to Sq MS pipe pieces with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer ,complete all as specified and directed
Material and Labour for replacement new long rail for charpoy GI Pipe of 32mm bore GI pipe medium grade (ISI marked) long rails threaded on both ends one side 22mm and other side 40mm complete all as shown on Drg and directed. Drawing No FD-220
CHARPOY TUBULAR STEEL JCOs (FD/MAP-II/01& all): (For ser No 53 to 55)Material and Labour for replacement of 12 mm thick Plywood top on existing charpoy tubular steel after repairing of frame/charpoy . plywood shall be 12 mm thick, commercial type, BWR grade, ISI marked of Make : Century ply/ Archid ply / green ply/ Kit Ply in single piece. Plywood shall be fixed to charpoy frame with and including nuts, bolts and screws complete all as specified in drawing and as directed.
Material and labour for replacement of head board of CHARPOY TUBULAR STEEL JCOs with new headboard of 18/19 mm thick PPB with beading fixed complete all around as shown in drawing as specified and directed .
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface of CHARPOY TUBULAR STEEL JCOs and applying coats of powder coating complete all as specified and directed .
Chair Writing Steel cushioned:- (FD/E6/MAP/12)(For ser No 56 to 59) Removing old UNSV PVC arm of Chair Writing MAP and supply fixing new PVC arm 2 Nos all as per existing size, shape and pattern complete all as specified and directed
removing UNSV Tapestry cloth of seat PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for seat complete all as specified and directed
removing UNSV Tapestry cloth of back PU foam cushion and supply and fixing new tapestry cloth and PU foam cushion of approved qulality with PVC lapping all around including new hot pressed plywood 12mm for back complete all as specified and directed
(iv) Preparation of old steel surface of chair writing and applying one coat of black Japan paint shown on drg. complete all as specified and directed
Charpoy IP folding with hard top of 12mm ply (For ser No 60 to 61)S&F of long rail shall have mid joint, connected by two fish plates on either side, each 120x120x5mm thick to 120x150x6mm thick MS sheet duly riveted by 4mm dia MS revets joining both the long rail & central rail.
(ii) S&F of charpoy top shall be of 12mm thick plywood in two pieces BWR grade confirming to IS-303.
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Almirah small steel all type (FD-1031) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .
Description all as per Serial Iten No 62 above but Locker steel (FD 257) complete all as specified and directed
Description all as per Serial Iten No 62 above but Table office clerk steel (FD 1004) complete all as specified and directed
Description all as per Serial Iten No 62 above but Table office Offrs steel (FD 1002) complete all as specified and directed
Description all as per Serial Iten No 62 above but Chair CB Steel with Arm (FD 75) complete all as specified and directed
Description all as per Serial Iten No 62 above but Chair CB Steel W/O Arm (FD 75) complete all as specified and directed
Description all as per Serial Iten No 62 above but Table 3'x2’ without drawer steel ((FD 1007) complete all as specified and directed
Description all as per Serial Iten No 62 above butTable 3'x2’ with drawer steel (FD-1008) complete all as specified and directed
Description all as per Serial Iten No 62 above butTeapoy verandah (FD-255) complete all as specified and directed
Description all as per Serial Iten No 62 above but Table Dining ORs (FD-165 ) complete all as specified and directed
REPAIRS TO CHAIR EASY (FD-201 and FD-229):- For Srl No 72 to 76) Material and labour for replacement of damaged front/rear legs of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged arm-rest of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged fillet for canning of seat and back of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed .
Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed .
Material and labour for removing old plastic cane from Chair and recanning with 2MM new plastic cane good quality as directed Boarder of chair shall be canning with 3 MM as shown on drawing complete all as specified and directed .
REPAIR TO CHAIR DINING (FD-279 and FD-228) (For ser No 77 to 82)S&F new PVC Seat for chair dinnig as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged front/rear leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged back rest of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged stiffener of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged side/front & back rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed .
REPAIR TO CHAIR DINING (FD-279 and FD-270,228) (For Srl item No 83 to 90) Material and labour for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged rear leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged back rest of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged stiffener of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged side/front/back rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged fillet for canning of seat of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed .
Material and labour for removing old plastic cane from Chair and recanning with 2MM new plastic cane good quality as directed Boarder of chair shall be canning with 3 MM as shown on drawing complete all as specified and directed .
REPAIR TO CHAIR WRITING (FD - 280 ,FD-1107 & all) (For Srl item No 91 to 96) Material and labour for replacement of damaged front legs of Chair writing made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged rear legs of Chair writing made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged back rest of Chair writing made out of well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed
Material and labour for replacement of damaged fillet for canning of seat of chair writing with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed .
Material and labour for removing old plastic cane from Chair and recanning with 2MM new plastic cane good quality as directed Boarder of chair shall be canning with 3 MM as shown on drawing complete all as specified and directed
REPAIR TO TABLE WRITING (FD – 33,249,275) (for item No 97 to 101 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed
Material and labour for replacement of drawer with fancy knob as shown on drawing complete all as specified and directed .
Material and labour for replacement of box completely with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock as shown on drawing complete all as specified and directed .
REPAIR TO TABLE CENTRE (FD-274):- (for Srl item No 102 to 105) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mmthick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged front/side rail of table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged stiffners of table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed .
REPAIR TO TEA POY (FD-232 and FD-278) (for srl item No 106 to 108 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed .
REPAIR TO PEG TABLE (FD-1114) (For srl item No 109 to 111) Material and labour for replacement of table top with 18/19mm thick Pre- laminated Particle board (exterior grade) one side teak face, ISI Marked, as shown on drawing complete all as specified and directed .
Material and labour for replacement of sides of table peg with 18/19mm thick Pre- laminated Particle board (exterior grade) one side teak face, ISI Marked, with beadings as shown on drawing complete all as specified and directed
Material and labour for replacement of back sides of table peg with 18/19mm thick Pre- laminated Particle board (exterior grade) one side teak face, ISI Marked, with beadings as shown on drawing complete all as specified and directed .
REPAIR TO BED PLYWOOD TOP (FD-213,246 & all) (For srl item No 112 to 115) Material and labour for replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws as shown on drawing complete all as specified and directed .
Material and labour for replacement of head board with legs completely for bed with new of required size made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed .
Material and labour for replacement of damaged long rail of bed with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed .
Material and labour for replacement of unserviceable foot boardwith legs of bed ply wood top as shown on drawing complete all as specified and directed .
S&F duly french polished complete frame 65 mm wide & Back Ply to be fixed completely for mirror of size 04 ft x 02 ft x 5 mm thick ,frame shall be made of sheesham wood complete all as shown on drawing and as per sample available in GE Office , complete all as specified and directed
Material and labour for preparation of surfaces by removing of old existing fade out polish from Table writing wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed .
Material and labour for replacement of unserviceable plastic cane from chair verandah and recanning of the existing with 4MM vide 1/2 Rd plastic cane good quality in Mat pattern including painting with two coat of synthetic enamal paint white before canning and 04 Nos PVC rubber shoes to the legs as shown on drawing complete all as specified and directed .
Description all as per Serial Iten No 118 above but Bed Hard plytop complete all as specified and directed
Description all as per Serial Iten No 118 above but Teapoy wooden complete all as specified and directed
Description all as per Serial Iten No 118 above but Centre Table complete all as specified and directed
vivek and co
SEALINE BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .