Repair and Renovation of Rani Amrit Kaur Guest House for AIIMS at Summer Hill Shimla 171005

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and approved by the Engineer-in-Charge.Group C.

Re-wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed Steel / PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable including dismantling of the existing wiring as required and approved by the Engineer-in-Charge. ( including switch & bakelite sheet etc.) Group C.

WIRING FOR CIRCUIT / SUB-MAINS IN CASING & CAPPING:Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required and approved by the Engineer-in-Charge.2x1.5 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required and approved by the Engineer-in-Charge.

3x1.5 Sq. mm.

3x4 Sq. mm.

6x4 Sq. mm.

3x10 Sq. mm.

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required and approved by the Engineer-in-Charge.

Supplying and drawing LAN cable CAT 6E, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required and approved by the Engineer-in-Charge.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required and approved by the Engineer-in-Charge. 20 mm. dia

25 mm. dia

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required and approved by the Engineer-in-Charge2 modules (78mmx78mmx50mm)

4 modules (140mmx78mmx50mm)

12 modules (205mmx135mmx60mm)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required and approved by the Engineer-in-Charge.

S.P. 5/ 6 Amps one way Modular switch.

S.P. 15/ 16 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet

6 pin,15/16 Amps Modular socket outlet

Telephone socket outlet, Modular.

TV. Socket outlet, modular.

Supplying & fixing following size modular base and cover plate on the existing modular metal boxes as required and approved by the Engineer-in-Charge

Modular base and cover plate, 4 module

Modular base and cover plate, 6 module

Modular base and cover plate, 12 module

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required and approved by the Engineer-in-Charge.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required and approved by the Engineer-in-Charge.

Supplying and fixing bakelite batten/angle holder including connections etc. as required and approved by the Engineer-in-Charge

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required and approved by the Engineer-in-Charge

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form and approved by the Engineer-in-Charge 300 mm deep (nominal

Supplying and fixing Aluminum alloy or wrought aluminium strip bus-bars, suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (38mmx6mm), in the existing enclosure or cubical panel with all accessories including connections etc. as required and approved by the Engineer-in-Charge

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making onnections, etc. as required and approved by the Engineer-in-Charge.200 Amp. -16 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required and approved by the Engineer-in-ChargeSingle pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge.63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge 63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required and approved by the Engineer-in-Charge

Double door-12 way

Double door-16 way

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required and approved by the Engineer-in-Charge.

Extra for using salt and charcoal for pipe earth electrode complete as required and approved by the Engineer-in-Charge.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required and approved by the Engineer-in-Charge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering and approved by the Engineer-in-Charge Armoured cable 50 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size and approved by the Engineer-in-Charge Armoured cable 50 sq. mm (3.5 core)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge25 Liter capacity water heater (Cat-A) with 5 star rating.

Providing and installation of exhaust fan of following sizes in the existing pening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge. Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required and approved by the Engineer-in-Charge 40 mm dia. G.I. pipe, heavy class

Providing and fixing LED tube 20 watt of Extuded Aluminium Led Batten product code BCLBAL 20 W cool white of bajaj or equivalent make as required and approved by the Enginner-in-Charge.

Providing and fixing LED tube 10 watt 2F of Extuded Aluminium Led Batten product code BCLSB 10 W cool white of bajaj or equivalent make as required and approved by the Enginner-in-Charge.

Providing and fixing wall Bracket Floretine WL 1LS B22 SS of 9 watt Led Lamp B22 base of Havells or equivalent make as required and approved by the Engineer-in -charge.

Providing and fixing Bulk Head Luminaire of IP 65 product code BIBWP 10 w LED of bajaj or equivalent make as required and approved by the Enginner-in-Charge.

Providing and fixing sleek square surface mounting Led downlight panel with Al die- castbody with optimized heat sink product code BGSLO SLEEK 8W WH SQ of bajaj or equivalent make as required and approved by the Engineer -in -charge

Providing and fixingsleek square surface mounting Led downlight panel with Al die castbody with optimized heat sink product code BGSLO SLEEK SURFACE 15W WH SQ of bajaj or equivalent make as required and approved by the Engineer -in -charge

Supplying and laying of DWC pipe of size OD 160and ID 136 of polyplast and equivalent make as required and approved by Engineer-in-charge.

Providing and fixing of ANTIQUE JHOOMER CAT NO. li-3610/6lp lamp type 6XGLS /Retrofit CFL/LED Cebter part made off brass wooden ornamental tail spoon holder cap frosted glass defuser aproved by the Engineer-in -charge.

Providing and fixing of street light luminaire IP 66 protection having product code BRTFG 36W LED bajaj or equivalent make aproved by the Engineer-in -charge.

Providing and fixing LED Lamp 9 W in the existing fixture Havels or equivalent make as required and approved by the Enginner-in-Charge.

Providing and fixing Victoria 60 AUTO CLEAN Chimney of dia 60cm with 6-Inch flexible aluminum duct pipe extended upto 60 feet (Silver ) of Hindware or equivalent make etc as required and approve by the Engineer -in -charge.

MOHINDER KUMAR VERMA