REPAIR / UPHOLSTERY TO SOFA SET WITH CUSHION, CHAIR WRITING, CHAIR DINING WITH DETACHABLE CUSHION AND CHAIR COMPUTER AT HISAR MIL STN.

Amount

Removing existing old tapestry cloth from seat & back of sofa set single seater & providing new tapestry cloth not less than Rs. 130 per mtr as per sample approved by GE and shall be procured from NTC approved mills. Drg No. HFD-2048

All as per Srl Item No 1.00 here--in-before but 05 seater (03+01+01). Drg No. HFD-2048

All as per Srl Item No 1.00 here-in-before but 04 seater (02+02). Drg No. HFD-2048

Repairing of stool dressing (MAP) by replacing the undermentioned u/s components/parts with new ones complete all as per drg and as directed by Engineer-in-Charge :- Drg No. FD/MAP-II/07

All Side (04 sides) 18 mm thick pre laminated particle board both side teak face and 6 mm thick teak wood edging on top and bottom side complete as per drg. Drg No. FD/MAP-II/07

Seat made of 50 mm thick, 32 density foam cushion duly upholstered with leatherite of superior quality fixed on and including 12 mm thick plywood BWR grade commerical bottom complete as shown on drg. Drg No. FD/MAP-II/07

Repair to Chair writing (MAP) by replacing under mentioned unserviceable components/parts with new ones complete as per Drawing No FD/E6/MAP/12 & TP :-

Removing unserviceable seat cushion from chair writing (MAP) and providing new cushion 50mm thick having 32 density foam duly covered with approved quality tapestry cloth not less than Rs. 130.00 per metre as per sample approved by GE and shall be procured from NTC approved mills. FD/E6/MAP/12 & TP

Removing unserviceable back cushion from chair writing (MAP) and providing new cushion 40mm thick having 28 density foam duly covered with approved quality tapestry cloth not less than Rs. 130.00 per metre as per sample approved by GE and shall be procured from NTC approved mills with plywood commercial BWR grade 6mm thick. FD/E6/MAP/12 & TP

Removing of unserviceable hand rest of chair writing MAP and S & F with new hand rest of shape & size all as shown in drg complete. Drg No FD/E6/MAP/12 & TP

M&L for welding of broken joints where ever for chair writing (MAP) required with gas welding including proper deeply filling to make finish complete and preparation of old painted steel/iron surface and applying two coats of black synthetic enamel paint complete. Drg No FD/E6/MAP/12 & TP

Removing existing u/s MS stiffner and providing new MS stiffner of existing shape & size with welding where ever required for chair writing (MAP) required with gas welding including proper deeply filling to make finish complete and preparation of old painted steel/iron surface and applying two coats of black synthetic enamel paint complete. Drg No FD/E6/MAP/12 & TP

Repair to Sofa set by replacing under mentioned unserviceable components/parts with new ones complete as per Drawing No FD-281/373 :-

Cushion of size 21”x22”x4” having 40 density duly covered with tapestry cloth not less than Rs. 130.00 per metre as per sample approved by GE and shall be procured from NTC approved mills.

Cushion cover 21”x22”x4” made out of tapestry cloth not less than Rs. 130/- per metre as per sample approved by GE and shall be procured from NTC approved mills.

Arm rest/Handle of 1st class hard wood (teak/shisham) of size 775x40x35mm as shown on drawing.

Front and rear legs of 1st class hard wood (teak/shisham) of size 350x40x35mm as shown on drawing.

Side rail for seat of 1st class hard wood (teak/shisham) of size 580x100x40mm as shown on drawing.

Front and back rail for seat of 1st class hard wood (teak/shisham) of size 540x100x40mm as shown on drawing.

Side rail for back rest of 1st class hard wood (teak/shisham) of size 540x50x25mm as shown on drawing.

Batten of back rest of 1st class hard wood (teak/shisham) of size 410x50x25mm as shown on drawing.

Batten of seat of 1st class hard wood (teak/shisham) of size 570x50x25mm as shown on drawing.

Stiffener of seat and back of sofa set single seater of 1st class hard wood (teak/shisham) of size 580x50x25mm as shown on drawing.

Stiffener of seat and back of sofa set three seater of 1st class hard wood (teak/shisham) of size 1590x50x25mm as shown on drawing.

M & L preparation of old wooden surfaces and applying two coats of French polish to sofa set 5 persons (3+1+1) on all exposed wooden surfaces all as specified and directed. Drg No FD-281/373

M & L preparation of old wooden surfaces and applying two coats of French polish to sofa set 4 persons (1+1+1+1) on all exposed wooden surfaces all as specified and directed. Drg No FD-281/373

M & L preparation of old wooden surfaces and applying two coats of French polish to sofa set 3 persons on all exposed wooden surfaces all as specified and directed. Drg No FD-281/373

Repairing to chair dining cushion (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as per drg. Drg No. FD/E6/MAP/01 & FD/MAP-II/04

Removing u/s seat cushion from chair dining wth deteachable cushion & providing new cushion 75 mm thick having 40 density duly covered with tapestry cloth not less than Rs. 130 per mtr as per sample approved by GE and shall be procured from NTC approved mills. Drg No. FD/E6/MAP/01 & FD/MAP-II/04

Removing u/s cushion cover from chair dining wth deteachable cushion & providing cushion cover made out of tapestry cloth not less than Rs. 130 per mtr as per sample approved by GE and shall be procured from NTC approved mills. Drg No. FD/E6/MAP/01 & FD/MAP-II/04

Repairing to Chair Easy Cushioned by replacing the under mentioned u/s components/parts with new ones complete all as per drg. Drg No. FD-358

Synthetic foam 40 density for seat & back as per existing size alongwith Leatherite Rexene of approved shade & testure and quality. Drg No FD-358

Leatherite Rexene of approved shade & testure and quality for seat & back. Drg No FD-358

Repair to chair CB steel Arms (MAP) by replacing under mentioned unserviceable components/parts with new ones complete as per Drawing No HFD 2045

Removing unserviceable seat cushion from chair CB Steel with Arms (MAP) and providing new cushion 50mm thick having 32 density foam duly covered with approved quality tepestry cloth not less than Rs.130.00 per meter as per sample approved by GE including 12 mm plywood as per exisitng pattern and shall be procured from NTC approved mills HFD 2045.

Removing unserviceable seat cushion from chair CB Steel with Arms (MAP) and providing new cushion 40mm thick having 28 density foam duly covered with approved quality tepestry cloth not less than Rs.130.00 per meter as per sample approved by GE and shall be procured from NTC approved mills HFD 2045.

Removing of unserviceable hand rest of chair CB steel with Arms MAP and S & F with new hand rest of shape & size all as shown in drg complete. Drg No HFD 2045.

M&L fo welding of broken joints where ever required for chair CB steel with Arms (MAP) with gas welding including proper deeply fitting to make finish complete and preparation of old painted steel/iron surface and applying two coats of black synthetic enamel paint complete. Drg No HFD 2045.

Providing existing u/s MS stiffner and providng new MS stiffner of existing shape & size with welding where ever required for chair CB steel with Arms (MAP) with gas welding including proper deeply fitting to make finish complete and preparation of old painted steel/iron surface and applying two coats of black synthetic enamel paint complete. Drg No HFD 2045.

Repair to Chair school and hard board (MAP) by replacing under mentioned unserviceable components/parts with new ones complete as per Drawing No FD/MAP/05 :-

Replacement of unserviceable seat from chair school (MAP) and providing new seat with accessories complete as per drawings. Drg No FD/MAP/05

Top made of 18mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white with and including 6mm thick teak wood edging all around the board complete as per drg. Drg No FD/E6/MAP/05.

Repair to Chair computer (MAP) by replacing under mentioned unserviceable components/parts with new ones complete as per Drawing No FD/E6/MAP/01 & TP :-

Replacement of unserviceable hydraulic system from chair computer with new hydraulic system to match with existing pattern/model, superior quality of existing trade name/make complete as per sample approved conforming to drawings. Drg No FD/E6/MAP/01 & TP

Replacement of unserviceable caster wheel of chair computer with new caster wheel of superior quality conforming to drawings complete. Drg No FD/E6/MAP/01 & TP

Replacement of unserviceable base alongiwth caster wheel of chair computer of superior quality conforming to drawings complete. Drg No FD/E6/MAP/01 & TP

Removing of old unserviceable Tapestry cloth from seat and back of chair computer and S & F new Tapestry cloth of approved colour, shape & size as per existing/drg complete. Drg No FD/E6/MAP/01 & TP

Removing of old unserviceable hand rest of chair computer and S & F new hand rest of shape & size as per existing chair computer complete. Drg No FD/E6/MAP/01 & TP

Removing unserviceable seat cushion from chair computer (MAP) and providing new cushion 50mm thick having 32 density foam duly covered with approved quality tapestry cloth not less than Rs. 130.00 per metre as per sample approved by GE and shall be procured from NTC approved mills with plywood commercial BWR grade 6mm thick complete. FD/E6/MAP/01

Removing unserviceable back cushion from chair computer (MAP) and providing new cushion 50mm thick having 28 density foam duly covered with approved quality tapestry cloth not less than Rs. 130.00 per metre as per sample approved by GE and shall be procured from NTC approved mills with plywood commercial BWR grade 6mm thick complete. FD/E6/MAP/01

Preparation of old painted steel/iron surfaces and applying one coat of painting on chair computer (MAP) with black synthetic enamle paint complete. FD/E6/MAP/01

Vinayak Distributors (BID ID -3317992)

malik constructions (BID ID -3315555)

KHAZAN SINGH SAWHNEY (BID ID -3316445)

SMS Enterprises (BID ID -3322996)