PROVN OF STAGING OF WATER TANK FOR OLJ 02 COVERED PASSAGE WITH PATHWAY AUGMENTATION OF SEWAGE LINE AND GATE AT BLDG NO

Amount

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc, and area n.exc.10 Sq.m on plan and getting out in any type soil Complete all as specified and as directed.

Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness Complete all as specified and as directed.

Removing excavated soil to a distance n exc 50m and depositing at a level n exc 1.5m above the starting point Complete all as specified and as directed.

Material & labour for for framed work as in doors or gates of angle or other section with gusset plates , rails braces , etc, complete drills for fixing of steel sheeting or other covering ,doors etc; to be prepared for hanging or sliding with and including either hooks or hinges conforming to Fe-410-W. Complete all as specified and as directed.

Material & labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, chanel or flat sections) including distance pieces, cleats etc or other connecting plates conforming to Gde Fe 410-W (Gde-E-250) Complete all as specified and as directed.

Material & labour for brick work with sub class 'B' bricks exc 6m mean radius straight or curved on plan built in cement mortar 1:4 Complete all as specified and as directed.

Material & labour for PCC type D-2(1:4:8) using 40mm graded crushed stone aggregates as in mass concrete and filling of foundation and mass concrete Complete all as specified and as directed.

Material & labour For PCC type B-1(1:2:4) using 20 mm graded cushed stone aggreates as in coping ,benching ,hold fast and similar work including naccesary form work Complete all as specified and as directed.

Material & labour for RCC type B1 (1:2:4) for foundation, including rafts, footings, foundation beams, bases for columns etc and mass concrete Complete all as specified and as directed.

Material & labour for RCC type B1 (1:2:4) as in column etc Complete all as specified and as directed.

Use & waste of form work sides of concrete foundations footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for fair finished surfaces Complete all as specified and as directed.

Form work to sides of concrete, sides of pillars columns of square or rectangular finished rough Complete all as specified and as directed.

Material & labour for TMT steel bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with MS wire annealed not less than 0.9mm dia complete all as specified and directed.

Material & labour for TMT steel bars 5mm dia and over and upto and including 10mm dia as in spacers , stirrups and binder binding with MS wire annealed not less than 0.9mm dia complete all as specified and directed.

Material & labour for 12 mm thick rendering on fair faces of brick surfaces finished even and smooth W/O using extra cement in cm1:4 complete all as specified and directed.

Material & labour for 10mm thick rendering on concrete surfaces in cm 1:3 finished even and fair for receiving finishes on vertical surfaces complete all as specified and directed.

Prapration of newly plastered surfaces of wall / old surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material & labour for two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide Zinc chrome primer complete all as specified and directed.

Material & labour for painting and writing down building No with letters (Block Rommans , Italic or Indian) n exc 30 cm hight complete all as specified and directed.

PVC pipe 110 mm dia low density of pressure rating 10Kg/Sqcm (in short lengths) fixed in walls as weep holes as in retaining wall complete all as specified and directed.

Material & labour for plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and directed.

Extra for forming fair finished drain or channel n exc 70 cm inner girth in cement concrete, using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and directed.

Removing excavated soil/debries form site to a distance exc 50m and nexc1.50 km out side defence land complete all as specified and directed.

Material & labour Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for drain cover,manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and directed. (Note:- Reinforcement will be measured and paid seperately.)

Material & labour for Reinforced cocrete pipe 300 mm dia,class NP-2 laid to floor and wall jointed complete with collars complete all as specified and directed.

Material & labour for concrete bed to drain pipes 300 mm dia type 1:3:6, C-2 including paking under,and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

supply & Fixing TMT bars 6-8 mm dia and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.

Material & labour for rendering 15mm thick on fair faces of brick works in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

Surface excavation over areas, n.exc 1.5 m deep and geeting out in hard/dense soil complete all as specified and directed.

Material & labour for hard core of broken stone boulders of gauge nexc. 63mm ,deposited ,spread, and levelled in layers 15 cm thick , watered and rammed to a true surface.complete all as specified and directed.

Material & labour for 100 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in sub base of floor etc complete all as specified and directed .

Material & labour for sand cushion 20 to 30 mm thick for laying and fixing interlocking tiles complete all as specified and directed.

Material & labour for machine pressed precast concrete interlocking paver block (glossy finish) any shape and size (sample approved by GE) confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in hard / dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

Material & labour for PCC 1:5:10, type E-2 using 40mm graded crushed stone aggregate as in sub base and mass conc complete all as specified and directed.

Steel work in tubular trusses /vertical posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and directed.

supply & Fixing rolled section as in main and cross beams , hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding gates , doors fixed with angle cleats or other connecting plates Fe 410 - W (Gde-E- 250) quality-A complete all as specified and directed.

supply & Fixing Mild steel screw bolts with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut nexc 5cm long dia of shank 11 to 15mm complete all as specified and directed.

supply & Fixing Mild steel screw bolts with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut nexc 30cm long dia of neck nexc 12mm complete all as specified and directed.

supply & Fixing Plates (plain or chequered ) channels square cut or notched oridinary or counter sunk forming holes w/o any attatchment complete all as specified and directed.

supply & Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, eves board and similar work to wall fixed with self tapping screws complete all as specified and directed.

Prapration of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer with two coat of wall care putty complete all as specified and directed.

Material & labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primmer complete all as specified and directed.

Material & labour for stone masonry randum rubble un-coursed well bounded bedded and solidly hearted in CM 1:6 complete all as specified and directed.

Material & labour for Precast cement concrete louvres and jallies 45 to 50mm thick set in cement mortar 1:6 type B0 (1:2:4 using 12.5mm graded aggregate etc sample as approved by GE complete all as specified and directed.

Reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded aggregate) using in beams, canti levers, bressummers, lintels over 1.5 mtr span and similar work etc complete all as specified and directed.

Material & labour form work to sides and soffits of floor roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, over hangers etc also splays between floor and beam etc complete all as specified and directed for rough finished surfaces of concrete flat.

Material & labour Mild TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to, TMT bars complete all as specified and directed.

Material & labour Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in similar work complete all as specified and directed.

Material & labour for rendering 5 mm thick in CM 1:3 on ceiling and exposed surface of concrete finsihed even and smooth without using extra cement complete all as specified and directed.

Material & labour for raised pointing to random or polygonal rubble masonary coursed or un coursed in CM (1:3) complete all as specified and directed.

Material & labour precast cement concrete 1:3:6 type C1 (20 mm graded stone aggregate) as in bond stone complete all as specified and directed.

Material & labour for framed work such as doors, gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors tank staging ladder , etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including ornament and intricate design, including pintle hings, stops hand made sliding bolts etc conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Surface excavation nexc. (not exceeding) 30 cm deep and avg 15 cm deep and getting out in any type of soil complete all as specified and directed.

Material & labour for 75 mm thick pcc type C-2 1:3:6 , using 40mm graded crushed stone aggregate as in sub base for receiving floor finishes finished even and fair complete all as specified and directed.

Material & labour for 25mm thick PCC type B-0 using 20mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified and directed.

Machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point complete all as specified and directed.

Removing excavated soil/debaries to a distance exc 50m and nexc 1.5 Km and depositing at level n exc 1.5m above the starting point , Including debris complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and directed.

Excavation in trenches exc. 1.5 m wide and n.exc. 3 m in depth for foundation or manholes etc, and area n.exc.10 Sq.m on plan and getting out in any type soil complete all as specified and directed.

Material & labour for SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed.

Material & labour Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete type D2 (1:4:8) for 150mm dia pipe complete all as specified and directed.

Material & labour for Reinforced cocrete pipe 150 mm dia,class NP-2 laid to floor and wall jointed complete with collars complete all as specified and directed.

Material & labour for concrete bed to drain pipes 150 mm dia type 1:3:6 C-2 including paking under,and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

supply & Fixing PVC bend 110 mm dia any radius with acess door complete all as specified and directed.

Material & labour for PVC (SWR) junction single (single T) equal or unequal 110 mm dia with access door complete all as specified and directed.

supply & Fixing 110mm bore (SWR) vent cowl complete all as specified and directed.

Material & labour for 50 mm thick PCC type C1 1:3:6 using 20mm graded crushed stone aggregate as in plinth protection laid in alternate pannels, finished even and smooth without using extra cement complete all as specified and directed.

Mild steel framed work such as grills, gratings etc. with ends of bars shouldered and /or riveted or forged into spike, framed guard bar, barred iron doors, ladder , framed bausters railing frame work for water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

supply & Fixing 4mm dia galvanised steel wire 150 mm x 100 mm mesh made up in to matresses or cages etc complete all as specified and directed.

supply & Fixing GI tubing of 15 mm bore medium grade with all fittings completely fixed to walls or laid in floors etc. complete all as specified and directed.

supply & Fixing GI tubing of 20 mm bore medium grade with all fittings completely fixed to walls or laid in floors etc complete all as specified and directed.

Dismantling of 500 ltrs capacity water tank of any description including all connection and removing from site complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 1000 Ltr capacity (cylindrical veritcal with closed top ) with threaded cap hoisted and fixed in position complete all as specified and directed.

Ball valves 20 mm size high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm bore pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.

supply & Fixing Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore complete all as specified and directed.

Material & labour for cement concrete in foundations, filling and mass concrete type C2 1:3:6 (40mm graded aggregate) in tank post complete all as specified and directed.

Material & labour for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded aggregate as in flooring finishing with extra cement complete all as specified and directed by Engr-in-Charge.

supply & Fixing in repair 1.25 mm thick plain black mild steel sheeting in ridges hip , valley gutters drip and gutters and straight flashings ( Length and girth as fixed) complete all as specified and directed.

Material & labour for 75 mm thick PCC 1:4:8, type D-2 by using 40 mm graded stone aggregate as in sub base floor complete all as specified and directed.

Material & labour for reinforced cement conc M-25 nominal mix as in slab supported on walls , beam, and columns in floors,roofs landings , balconies etc complete all as specified and directed.

Material & labour for reinforced cement concrete (design mix) M -25 using (20mm graded aggregates) fins, fascias, louvres, parapets, and railings exc. 60cm in height, IS, balustrade, and retaining structures complete all as specified and directed.

Demolition of Brickwork or stone / boulders masonry laid dry built in cement mortar complete all as specified and directed.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description complete all as specified and directed.

supply & Fixing for 03 mm thick flex sheet with design writing word as apporved by GE complete all as specified and directed.

Material & labour for preparation of new plaster surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX or equivalent) over a one coat of primer with two coat of wall care putty etc complete all as specified and directed.

Material & labour for 3mm thick wall care putty on Ceiling surface complete all as specified and directed.

Material & labour for complete removal of existing treatment (using removal machine) including preparing surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX or equivalent) over a coat of Primer two coat of wall care putty etc complete all as specified and directed.

Material & labour complete removal of existing treatment applying two coat of cement base paint over a coat of primer paint on walls complete all as specified and directed by Engr-in-Charge.

supply & Fixing Powder coated 15 micron aluminium door of approved design complete all as specified/directed with all fixing arrangement including providing and fixing door handle, tower bolts, mortice lock 6 lever (Make - Harrison/Godrej) one on each door and , aluminium Powder coated tower bolts 200 mm long (03 Nos on each shutters) and 5mm thick tinted glass pane of glazed shutter along with aluminium glazing beading of size 19.00 mm x 17.5 mm x 0.70 mm @ weight of 0.097 Kgs per RM including rubber gasket on both side complete alongwith neoprene lining. The member shall be made out of extended aluminium sesction comprising of :- (Size of the door shall be as per site requirement) (a) Door frame of size 95.25 mm x 44.50 mm x 1.70 mm @ 1.301 Kg/RM.. (b) Shutter vertical member 85 x 44.50 x 1.56 mm @ 1.39 Kg per RM. (c) Shutter top member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. (d) Shutter bottom member 101.60 x 44.50 x 1.60 mm @ 1.301 Kg per RM. (e) Shutter lock rail member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. (f) 12 mm thick toughened coloured glass pan match to aluminium partition The actual measurement shall be taken, wastage shall be including in the rates, the above sections are from JINDAL/INDAL/HINDAICO/WALCO extruion. The contractor is at liberty to choose high section from approved make with minor variation in sizes and weight as approved. However nothing extra shall be paid for over size and over weight section also.

Anodised aluminium window/ partition and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

supply & Fixing 3 mm thick glass sheet oridinary quality in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc. complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Supply and fix of focus lights of High resolution LED 58 Watts with pressure die cast aluminium housing with toughened glass having IP-66 degree of protection, indivudual LED's must have secondary lense for better throw accross and along the road with system luminarie effeciency ≥ 110 lumen/Watt coulour rending index (CRI) of ≥ 70, co-related colour, temperature (CCT) of 5700K luminaire should have surge protection upto 05KV and having additional surge protection upto 10 KV for driver, PF ≥ 0.9 and THD ≥10%( make of LED shall be Cree/Nichia/Osram) operating voltage range from 140 to 280 volt, The potted driver used shall be a constant current driver with efficiency of ≥85%. The manufacturers LOGO shall be engraved into housing of luminaire incl fixing arrangements Note - Including fixing arrangements of angel iron drilling holes welding and nut bolts all necessary accessories complete all as specified and directed . Make :- Wipro CAT No LF27-601-040-30-XX or Phillips of CG.

Material & labour for cable with PVC insulated 2.5 Sq mm, three core multi standard flexible copper conductor cable complete all as specified and directed.

supply & Fixing of moduler box of FRP/impact resistance plastic & heat resistant materials of suitable size to accommodate the fixtures with IP 65 for controlling of LED security light of any wattages inculidng provison of MCB SP 6 Amps, connector terminal block 4 pole suitable for fixing cable connection and fixing to pole with suitable size of clamps, nuts, bolts and painting steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

supply & Fixing steel tubular swaged pole eracted to truly vertical or planted as struct complete with 6 mm thich MS base plate, welded to pole, finial taper cap, bolts, nuts screws, 12 Mtr long, type 410 SP -64, including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint of the portion embeded in concrete and marking pole no with black paint at suitable height all as specified and directed.

Material & labour Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for coping of poles complete all as specified and directed.

Supplying, laying, jointing and testing L T underground cable, heavy duty 1100 Volts XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable of size 10 sq mm 2 core laid in trencehs/ducts or fixed to poles /walls or laid under roads/paths/drains/cluverts complete all as specified and directed.

Material & labour for Dry sand cushioning to underground cable provided with layer of 8 cms deep before laying the cable and 15 cms deep after laying and stretching the cable complete all as spefified. Note Punned thickness shall be measured.

M & for providing new sub class 'B" bricks, Old size, well burnt lait flat dry for protection of underground cable complete all as specified and directed.

M/S ASHOK KUMAR PACHIALA