INTERNAL PERIODICAL SERVICES TO MD ACCN (ZONE-D) IN THE AOR OF AGE B/R-I UNDER GE (A) SURATGARH AT SURATGARH MIL STN

Amount

Notes:- (i) 50 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) Material obtained from demolition/dismantled and the serviceable material (other than reused in the work) shall be the property of the Govt and shall be removed and deposited in the MES Store Yard without any extra cost to Govt. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated Group-I category makes as approved by HQ CE SWC Jaipur / HQ CE BTZ in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. (ix) Main Items and fixtures, base materials shall be from the same manufacturer. (x) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder.

M&L for complete removal or existing treatment and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work approved make complete all as specified and directed by Engineer-In-Charge. (Brand : Tractor Emulsion (Asian Paint), Easy Clean (Berger Paint), Promise Inerior (Dulux Akzonobel), Nerolac paints or equivalent brand of Make as specified in Appendix 'B'.)

M & L for applying 2mm thick one coat of Acylic wall care putty finished even and smooth surface complete as specified and directed by Engineer-in-Charge.

M&L for complete removal of exinting treatment of wall and applying one coat of acrylic distemper complete all as specified and directed by Engineer-In-Charge. (Brand : Tractor Emulsion (Asian Paint), Easy Clean (Berger Paint), Promise Inerior (Dulux Akzonobel), Nerolac paints or equivalent brand of Make as specified in Appendix 'B'.)

M&L for complete removal or existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. approved make complete all as specified and directed by Engineer-In-Charge. (Brand :- Apex Ultima (Asian Paint), Weather Coat ( Berger Paint ), Excel No Dust ( Nerolac) or equivalent brand of Make specified in Appendix 'B'.

M&L complete removal of existing treatment of ceiling applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L removal of existing treatment of ceiling and applying two coat of white wash complete and all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of old wooden or wood based surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-In-Charge.

ML for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified complete all as specified and directed by Engineer-in-Charge

M&L preparing newly plastered surfaces of walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as directed. (Brand :- Apex Ultima (Asian Paint), Weather Coat ( Berger Paint ), Excel No Dust (Nerolac) or equivalent brand of Make specified in Appendix 'B'.

M&L for preparation of newely plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engineer-In-Charge.

M & L for preparation of new plastered surfcaces of wall and applying two coats of acrylic distemper including chalk whitening preparatory to distempering complete all as specfied & directed by Engineer-in-Charge

M & L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing worke complete as specified and Directed by Engg -in -Charge.

Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-charge.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortor 1:4 including surface should be finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-In-Charge.

M&L for 10 mm thick rendering in cement mortar (1:6) on fair faced or on other than fair faces surface of brick masonary or concrete surface of walls, finished even & smooth without using extra cement complete all as specified and directed by Engineer-In-Charge.

M&L for 10 mm thick rendering in cement mortar (1:3) on brick or concrete surface of ceiling, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

NOTES FOR SER ITEM NO 01 TO 12 OF BOQ : (a) The work pertaining to periodical services shall be executed by contractor as per MOU from authorised applicator through manufacturer of which the materials i.e Exterior Emulsion Paint, Distemper, Putty etc after approved by the GE. (b) The Contractor shall submit the documents “Memoradum of Understanding” (MoU) before starting the subject work with atleast one of the manufacturers mentioned in the contract documents. (c) Cost of scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures as per site requirement shall be included in the quoted rate. (d) Removing of nails, making good holes, cracks etc as per site requirement. (e) Work in patches and in narrow/ widths, bands, cornices, plasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery, electric fittings, wirings etc drops and splashes of paint to be cleared to the entire satisfaction of Engineer-in-Charge. (h) Removing and existing furniture for painting work and replacing the same post painting work, movable cupboard, chicks, blinds etc. (j) Sample patch of 10 sqm be prepared considering all the items of periodicals and shall be got approved from GE prior to carrying out further subject work.

NOTES FOR SER ITEM NO 01 TO 12 OF BOQ (Contd). (k) GUARANTEE OF PERIODICAL SERVICES : Periodical services against respective item of BOQ using mechanized equipment’s only executed under this contract are under the guarantee of contractor for 05 (Five) Years after the certified physical completion of work. Contractor is fully liable under this guarantee to rectify and redo all defective work intimated to him during this period including all type of materials and labour to the specifications catered for in the contract. In case contractor fails to rectify the defective work, Accepting Officer shall get the rectification done as necessary at the risk and cost of contractor and recover the cost in full from the contractor. If the contractor consider that any additional treatment is required over and above that specified here in before in Schedule ‘A’, the same shall be carried out by the contractor without any extra cost to the Government.

PAREEK AND COMPANY (BID ID -3318435)

SHIVA BUILDERS (BID ID -3325841)

M/S Shree Ram Enterprises (BID ID -3326022)

SHILPI CONSTRUCTION COMPANY (BID ID -3318653)

PACHAR BUILDERS (BID ID -3318540)

M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3318364)

MSR INFRATECH (BID ID -3319058)

POOJA CONSTRUCTION COMPANY (BID ID -3318582)