Civil work

Amount

Supplying and fixing in position of Aluminium Powder coated PARTITION with 63.50x38.10x 1.85mm @ 1.095 Kg/m extruded box section at bottom, vertical members spaced at 1.20m,2.10m and 2.40m height. The vertical members are spaced at 90cm c/c at equal height.Alu. Clips: 17.3x17.00x0.70mm @ 0.097kg/m.

The bottom and top panels shall be covered with Medium Density Fibre (MDF) Board 12mm thick Exterior Grade both sides pre-laminated and the centre panels shall be fixed with 5.5mm thick plain glass with necessary glazing clips, rubber beedings etc.,including necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and make good to the original condition after fixing. The aluminium surfaces is to be anodized with natural colour finish under Electrically controlled condition in accordance with ISI 1868/1962 specification for an average anadic film thickness of not less than 15 microns. All materials and colour should be got approved by the University Engineer.

Supplying, fabricating and fixing in position of Aluminium Powder coated finish of single leaf fully panelled SLIDING DOOR with Medium Density Fibre (MDF) Board 12mm thick Exterior Grade both sides pre-laminated at the Shutter bottom rail 95.25x44.45x1.70mm @ 1.301 kg/m, centre mullions 49.91x 44.45 x [email protected]/m and vertical styles with [email protected]/m, Top rail 47.62 x 44.45 x [email protected]/m and Running channel section: 40 x 40 x 2.90mm @ 0.895kg/m and necessary accessories such as Alu. Clips: 17.3x17.00x0.70mm @ 0.097kg/m, Aluminium handle on both sides, lock, roller,including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beam, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc. complete. All the Aluminium sections are to be Aluminium Powder coated finish under electically contolled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc.,

Supplying and fixing aluminium anodised suspended FALSE CEILING system using Powder coated G.I section of size 25mm x 25mm x 1.20m supported along the wall all-round and inter connected with main frame using section of size 38mm x 25mm x 1.20mm at 1.20m both ways and cross supports with 25mm x 25mm x 1.20mm at 1.20m c/c both ways and suspended by means of 6mm M.S. rod one and threaded and the other end fixed on ceiling at 1.20m c/c both ways. The total area is covered with 10mm thick gypsum board of size 0.60m x 0.60m and laying aluminium tees and angles and board with necessary clips, jointing plats, screws etc., complete.(C.E.BLDGS) PWD approved rate)

Brick partition walls of 11.50cm thickness using best quality Fly ash bricks of size 230 X 110 X 70mm in Cement Mortar 1:3 (One Cement and Three M Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the University Engineer. (Hoop iron reinforcement will be measured and paid for separately)

a) Foundation & Basement

Supplying and fixing in position best quality approved make white glazed procelin arthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the University Engineer before use on works]

Supplying, laying and jointing UPVC pipes (having working pressure 10kg. /sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using UPVC adhesives (but exculding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work/ cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by University Engineer before use on works.

a) Ground floor

Supplying and fixing in position of UPVC specials of the following sizes of best approved quality including ost of necessary adhesive but excluding labour charges for fixing to walls and giving connection to the UPVC soil stacks, with necessary dismantling the brick masonry / RCC floor or roof slab and redoing the distrubed portions to original condition etc., complete complying with standard specification as directed by the University Engineers. (Water supply arrangements)

a) UPVC ELBOW 20mm dia

b) UPVC TEE 20mm dia

c) Coupling 20mm dia

d) Reducer Elbow 25mm x 20mm dia

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm PVC Pipe

Supplying PVC Specials (with working pressure 10kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangementsSince the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing PVC specials needs to be allowed.

75mm PVC Elbow

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the University Engineer.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the University Engineer before use of work).

Supplying and fixing in position 15mm dia Swan Neck Tap (SS) (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the University Engineer before use on the works)

SREE SASTIKA BUILDERS AND CONTRACTORS (BID ID -1528726)