Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹7.7 L+₹655 (0.09%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹7.8 L+₹5,181 (0.67%)Rejected-Finance 00 VILL RATI KA NAGLA SIKANDRA RAO ROAD INDUSTRIAL HATHRAS UTTAR PRADESH 204212 | HATHRAS | UTTAR PRADESH | 204212 | L3 | Rejected-Finance Being L3 |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
3 Dec 2020, 6:00 pmClosed
Garrison Engineer (East) Allahabad
Stanley Road, Teliyarganj, Allahabad
REPAIR/ MAINTENANCE OF SUBMERSIBLE PUMP SET AND ALLIED WORKS AT OLD CANTT ALLAHABAD.
2020_MES_391435_1
8429/E8
Open Tender
Civil Works
Item Rate
270 days
Allahabad
As Per NIT
6 documents required · 6 mandatory
₹500
Yes
GE (East) Allahabad
₹20,000
Yes
25 Jan 2021
31 Oct 2020
10 Dec 2020
31 Oct 2020
3 Dec 2020
18 Nov 2020
Amount
Dis-connection of submerssible pump set of any capacity from existing bore well system, disconnection of water supply & electric connection and taking out the unserviceable pump set from borewell with connected lowering pipe line of any size with mannual or suitable electric driven with chain pulley block upto 160 feet deep & re-assembling after neccessary repair and re-lowering the pump set in same borewell re-connection of electric & water connection for entire satisfaction of Engineer-in-Charge complete as directed. Note : Repair of U/S pump set will be paid separately. ii) All type of T/P required to complete the job will be arranged by contractor. iii) Job will be done round O-Clock continued as per site requirement as directed by Engineer-in-Charge. iv) Delay in job will be charged on the basis of Rs. 100/- per hour. v) Items required for motor connection such as PVC insulation tape, Valcanised rubber / puncture tube etc will be provided by the contractor to complete the work and rate as deemed to be quoted in unit rate no extra payment will be paid to the contractor.
Material & Labour for cutting out the existing winding of submersible motor & satator of capacity 30/33HP any make and re-winding with the same size of copper winding wire as per existing gauge and number of turns (Coils) and necessary filling of varnish of best quality for proper insulation with entire satisfaction (contractor shall be done winding work at their workshops the cost of transportation of pump from site to workshop & back shall be included in quoted rate) as specified & directed by Engineer-in-Charge.
Labour only for Straightening of the slots (any number) of stator of submersible motor of any make as directed by Engineer-in-charge.
Supply & fixing thrust bearing block complete for submersible motor of any make as directed b y Engineer-in-charge.
Supply & fixing in repair of worn out gun metal bushes for submersible motor as per manufacturer's design and specification of required size as directed by Enginer-in-charge.
Supply & Fixing in repair 3 core 6 Sqmm copper conductor submersible cable complete with suitable clips & lugs as specified & directed by Engineer-in-charge. Make : Finolex / Plaza / Grandlay / KEI / Havells
Supply & fixing sand guard of submersible motor to match the existing size & capacity to prevent the sand protector of pump of same size & type as directed.
Supply & fixing sleeves of end plates of submersible motor to match the exisitng shape & size as directed..
Supply & fixing of cable grommet to match the existing size as directed by Engineer-in-Charge.
Supply & fixing of water seal to prevant leakage of water as directed by Engineer-in-Charge.
Supply & fixing of studs with nuts of required length & dia
Material & Labour for shaft of submersible motor and filling or re-metalling of metal on shaft of motor, turning or grinding in lathe machine to bring it to original size and shape and polishing & fixing shaft on submersible motor complete as directed to entire satisfactionn of Engineer-in-Charge.
Supply & fixing coupling of submersible motor and pump with key complete as directed.
Welding [Gas] of broken shaft and jointing of broken motor shaft with new piece, making key slot, grinding to make coupling size and balancing the rotor complete as specified & directed by Engineer-in-Charge.
Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, re-threading of worn out studs holes and proving suitaqble size studs with nuts complete as specified & directed by Engineer-in-Cahrge.
Supply & fixing of bowl bushes to match the same size & type for smooth functioning complete
Supply & fixing of neck ring of same size & type complete
Supply & fixing of steel distance pieces & key
Supply & fixing of impellor stainless steel / gun metal as per existing size & shape complete
Supply & fixing in repair of cast iron bowl for submersible pump to match the existing size & type complete as directed.
Supply & fixing in repair of cast iron non return valve of 80 mm bore pipe complete as specified & directed.
Supply & fixing in repair of stainless steel pump shaft of submersible pump complete as directed.
Supply & fixing cast iron Head Extention complete as directed by Engineer-in-charge.
Supply & fixing of Cast Iron Inlet body of pump complete as directed.
Supply & fixing of Wedges of slots to match the exisitng slots complete as directed.
Material & Labour for cable jointing of 3 core cable of any size by using puncture compound roll & tape / Sealing compound complete as directed by Engineer-in-Charge.
Material & Labour two coat painting of Motor and pump with synthetic enamel paint (Hammor tone finish) with spray machine complete to entire satisfaction of Engineer-in-Charge.
Material & Labour for cutting out the existing winding of submersible motor & satator of capacity 15/20 HP any make and re-winding with the same size of copper winding wire as per existing gauge and number of turns (Coils) and necessary filling of varnish of best quality for proper insulation with entire satisfaction (contractor shall be done winding work at their workshops the cost of transportation of pump from site to workshop & back shall be included in quoted rate) as specified & directed by Engineer-in-Charge.
Labour only for Straightening of the slots (any number) of stator of submersible motor of any make as directed by Engineer-in-charge.
Supply & fixing thrust bearing block complete for submersible motor of any make as directed b y Engineer-in-charge.
Supply & fixing in repair of worn out gun metal bushes for submersible motor as per manufacturer's design and specification of required size as directed by Enginer-in-charge.
Supply & Fixing in repair 3 core 6 Sqmm copper conductor submersible cable complete with suitable clips & lugs as specified & directed by Engineer-in-charge. Make : Finolex / Plaza / Grandlay / KEI / Havells
Supply & fixing sand guard of submersible motor to match the existing size & capacity to prevent the sand protector of pump of same size & type as directed.
Supply & fixing sleeves of end plates of submersible motor to match the exisitng shape & size as directed..
Supply & fixing of cable grommet to match the existing size as directed by Engineer-in-Charge.
Supply & fixing of water seal to prevant leakage of water as directed by Engineer-in-Charge.
Supply & fixing of studs with nuts of required length & dia
Material & Labour for shaft of submersible motor and filling or re-metalling of metal on shaft of motor, turning or grinding in lathe machine to bring it to original size and shape and polishing & fixing shaft on submersible motor complete as directed to entire satisfactionn of Engineer-in-Charge.
Supply & fixing coupling of submersible motor and pump with key complete as directed.
Welding [Gas] of broken shaft and jointing of broken motor shaft with new piece, making key slot, grinding to make coupling size and balancing the rotor complete as specified & directed by Engineer-in-Charge.
Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, re-threading of worn out studs holes and proving suitaqble size studs with nuts complete as specified & directed by Engineer-in-Cahrge.
Supply & fixing of bowl bushes to match the same size & type for smooth functioning complete
Supply & fixing of neck ring of same size & type complete
Supply & fixing of steel distance pieces & key
Supply & fixing of impellor stainless steel / gun metal as per existing size & shape complete
Supply & fixing in repair of cast iron bowl for submersible pump to match the existing size & type complete as directed.
Supply & fixing in repair of cast iron non return valve of 80 mm bore pipe complete as specified & directed.
Supply & fixing in repair of stainless steel pump shaft of submersible pump complete as directed.
Supply & fixing cast iron Head Extention complete as directed by Engineer-in-charge.
Supply & fixing of Cast Iron Inlet body of pump complete as directed.
Supply & fixing of Wedges of slots to match the exisitng slots complete as directed.
Material & Labour for cable jointing of 3 core cable of any size by using puncture compound roll & tape / Sealing compound complete as directed by Engineer-in-Charge.
Material & Labour two coat painting of Motor and pump with synthetic enamel paint (Hammor tone finish) with spray machine complete to entire satisfaction of Engineer-in-Charge.
Material & Labour for cutting out the existing winding of submersible motor & satator of capacity 40/41 HP any make and re-winding with the same size of copper winding wire as per existing gauge and number of turns (Coils) and necessary filling of varnish of best quality for proper insulation with entire satisfaction (contractor shall be done winding work at their workshops the cost of transportation of pump from site to workshop & back shall be included in quoted rate) as specified & directed by Engineer-in-Charge.
Labour only for Straightening of the slots (any number) of stator of submersible motor of any make as directed by Engineer-in-charge.
Supply & fixing thrust bearing block complete for submersible motor of any make as directed b y Engineer-in-charge.
Supply & fixing in repair of worn out gun metal bushes for submersible motor as per manufacturer's design and specification of required size as directed by Enginer-in-charge.
Supply & Fixing in repair 3 core 6 Sqmm copper conductor submersible cable complete with suitable clips & lugs as specified & directed by Engineer-in-charge. Make : Finolex / Plaza / Grandlay / KEI / Havells
Supply & fixing sand guard of submersible motor to match the existing size & capacity to prevent the sand protector of pump of same size & type as directed.
Supply & fixing sleeves of end plates of submersible motor to match the exisitng shape & size as directed..
Supply & fixing of cable grommet to match the existing size as directed by Engineer-in-Charge.
Supply & fixing of water seal to prevant leakage of water as directed by Engineer-in-Charge.
Supply & fixing of studs with nuts of required length & dia
Material & Labour for shaft of submersible motor and filling or re-metalling of metal on shaft of motor, turning or grinding in lathe machine to bring it to original size and shape and polishing & fixing shaft on submersible motor complete as directed to entire satisfactionn of Engineer-in-Charge.
Supply & fixing coupling of submersible motor and pump with key complete as directed.
Welding [Gas] of broken shaft and jointing of broken motor shaft with new piece, making key slot, grinding to make coupling size and balancing the rotor complete as specified & directed by Engineer-in-Charge.
Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, re-threading of worn out studs holes and proving suitaqble size studs with nuts complete as specified & directed by Engineer-in-Cahrge.
Supply & fixing of bowl bushes to match the same size & type for smooth functioning complete
Supply & fixing of neck ring of same size & type complete
Supply & fixing of steel distance pieces & key
Supply & fixing of impellor stainless steel / gun metal as per existing size & shape complete
Supply & fixing in repair of cast iron bowl for submersible pump to match the existing size & type complete as directed.
Supply & fixing in repair of cast iron non return valve of 80 mm bore pipe complete as specified & directed.
Supply & fixing in repair of stainless steel pump shaft of submersible pump complete as directed.
Supply & fixing cast iron Head Extention complete as directed by Engineer-in-charge.
Supply & fixing of Cast Iron Inlet body of pump complete as directed.
Supply & fixing of Wedges of slots to match the exisitng slots complete as directed.
Material & Labour for cable jointing of 3 core cable of any size by using puncture compound roll & tape / Sealing compound complete as directed by Engineer-in-Charge.
Material & Labour two coat painting of Motor and pump with synthetic enamel paint (Hammor tone finish) with spray machine complete to entire satisfaction of Engineer-in-Charge.
Material & Labour for cutting out the existing winding of submersible motor & satator of capacity 7.5/10 HP any make and re-winding with the same size of copper winding wire as per existing gauge and number of turns (Coils) and necessary filling of varnish of best quality for proper insulation with entire satisfaction (contractor shall be done winding work at their workshops the cost of transportation of pump from site to workshop & back shall be included in quoted rate) as specified & directed by Engineer-in-Charge.
Labour only for Straightening of the slots (any number) of stator of submersible motor of any make as directed by Engineer-in-charge.
Supply & fixing thrust bearing block complete for submersible motor of any make as directed by Engineer-in-charge.
Supply & fixing in repair of worn out gun metal bushes for submersible motor as per manufacturer's design and specification of required size as directed by Enginer-in-charge.
Supply & Fixing in repair 3 core 6 Sqmm copper conductor submersible cable complete with suitable clips & lugs as specified & directed by Engineer-in-charge. Make : Finolex / Plaza / Grandlay / KEI / Havells
Supply & fixing sand guard of submersible motor to match the existing size & capacity to prevent the sand protector of pump of same size & type as directed.
Supply & fixing sleeves of end plates of submersible motor to match the exisitng shape & size as directed..
Supply & fixing of cable grommet to match the existing size as directed by Engineer-in-Charge.
Supply & fixing of water seal to prevant leakage of water as directed by Engineer-in-Charge.
Supply & fixing of studs with nuts of required length & dia
Material & Labour for shaft of submersible motor and filling or re-metalling of metal on shaft of motor, turning or grinding in lathe machine to bring it to original size and shape and polishing & fixing shaft on submersible motor complete as directed to entire satisfactionn of Engineer-in-Charge.
Supply & fixing coupling of submersible motor and pump with key complete as directed.
Welding [Gas] of broken shaft and jointing of broken motor shaft with new piece, making key slot, grinding to make coupling size and balancing the rotor complete as specified & directed by Engineer-in-Charge.
Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, re-threading of worn out studs holes and proving suitaqble size studs with nuts complete as specified & directed by Engineer-in-Cahrge.
Supply & fixing of bowl bushes to match the same size & type for smooth functioning complete
Supply & fixing of neck ring of same size & type complete
Supply & fixing of steel distance pieces & key
Supply & fixing of impellor stainless steel / gun metal as per existing size & shape complete
Supply & fixing in repair of cast iron bowl for submersible pump to match the existing size & type complete as directed.
Supply & fixing in repair of cast iron non return valve of 80 mm bore pipe complete as specified & directed.
Supply & fixing in repair of stainless steel pump shaft of submersible pump complete as directed.
Supply & fixing cast iron Head Extention complete as directed by Engineer-in-charge.
Supply & fixing of Cast Iron Inlet body of pump complete as directed.
Supply & fixing of Wedges of slots to match the exisitng slots complete as directed.
Material & Labour for cable jointing of 3 core cable of any size by using puncture compound roll & tape / Sealing compound complete as directed by Engineer-in-Charge.
Material & Labour two coat painting of Motor and pump with synthetic enamel paint (Hammor tone finish) with spray machine complete to entire satisfaction of Engineer-in-Charge.
Material & Labour for cutting out the existing winding of submersible motor & satator of capacity 2 HP any make and re-winding with the same size of copper winding wire as per existing gauge and number of turns (Coils) and necessary filling of varnish of best quality for proper insulation with entire satisfaction (contractor shall be done winding work at their workshops the cost of transportation of pump from site to workshop & back shall be included in quoted rate) as specified & directed by Engineer-in-Charge.
Labour only for Straightening of the slots (any number) of stator of submersible motor of any make as directed by Engineer-in-charge.
Supply & fixing thrust bearing block complete for submersible motor of any make as directed b y Engineer-in-charge.
Supply & fixing in repair of worn out gun metal bushes for submersible motor as per manufacturer's design and specification of required size as directed by Enginer-in-charge.
Supply & Fixing in repair 3 core 6 Sqmm copper conductor submersible cable complete with suitable clips & lugs as specified & directed by Engineer-in-charge. Make : Finolex / Plaza / Grandlay / KEI / Havells
Supply & fixing sand guard of submersible motor to match the existing size & capacity to prevent the sand protector of pump of same size & type as directed.
Supply & fixing sleeves of end plates of submersible motor to match the exisitng shape & size as directed..
Supply & fixing of cable grommet to match the existing size as directed by Engineer-in-Charge.
Supply & fixing of water seal to prevant leakage of water as directed by Engineer-in-Charge.
Supply & fixing of studs with nuts of required length & dia
Material & Labour for shaft of submersible motor and filling or re-metalling of metal on shaft of motor, turning or grinding in lathe machine to bring it to original size and shape and polishing & fixing shaft on submersible motor complete as directed to entire satisfactionn of Engineer-in-Charge.
Supply & fixing coupling of submersible motor and pump with key complete as directed.
Welding [Gas] of broken shaft and jointing of broken motor shaft with new piece, making key slot, grinding to make coupling size and balancing the rotor complete as specified & directed by Engineer-in-Charge.
Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, re-threading of worn out studs holes and proving suitaqble size studs with nuts complete as specified & directed by Engineer-in-Cahrge.
Supply & fixing of bowl bushes to match the same size & type for smooth functioning complete
Supply & fixing of neck ring of same size & type complete
Supply & fixing of steel distance pieces & key
Supply & fixing of impellor stainless steel / gun metal as per existing size & shape complete
Supply & fixing in repair of cast iron bowl for submersible pump to match the existing size & type complete as directed.
Supply & fixing in repair of cast iron non return valve of 80 mm bore pipe complete as specified & directed.
Supply & fixing in repair of stainless steel pump shaft of submersible pump complete as directed.
Supply & fixing cast iron Head Extention complete as directed by Engineer-in-charge.
Supply & fixing of Cast Iron Inlet body of pump complete as directed.
Supply & fixing of Wedges of slots to match the exisitng slots complete as directed.
Material & Labour for cable jointing of 3 core cable of any size by using puncture compound roll & tape / Sealing compound complete as directed by Engineer-in-Charge.
Material & Labour two coat painting of Motor and pump with synthetic enamel paint (Hammor tone finish) with spray machine complete to entire satisfaction of Engineer-in-Charge.
Supply & Fixing in repair single phase preventor to prevent against single phasing, reverse phasing with wiring & testing complete as specified & directed. Make : Minilec / Electromed / L&T)
Materiaql & Labour in repair faulty analog type ammeter from LT panel and removing from site Supply & Fixing three phase power ammeter Analog type suitable for 0-100 Amps range, with suitable CT's ratio of size 96mm x 96mm size including necessary control wire connection and testing complete as specified & directed. Make : AE / Legrand / L&T / HPL
Materiaql & Labour in repair faulty analog type Volt Meter from LT panel and removing from site Supply & Fixing three phase Volt Meter Analog type suitable for 0-500 Volt range of size 96mm x 96mm size including necessary control wire connection and testing complete as specified & directed. Make : AE / Legrand / L&T / HPL
Supply & Fixing in repair LED Indicator (RYB) colour with necessary wiring complete as specified & directed.
Supply & Fixing in repair Submersible pump controller in sheet steel enclosure type MU-G suitable for 30 HP or 22.5 KW submersible pumping set relay max range 30-50 Amps complete as specified & directed by Engineer-in-Charge. Make : Model MU-G 30, Cat No. CS 96008 of L & T or Jyoti / GE / BCH / Havells
Supply & Fixing in repair Submersible pump controller in sheet steel enclosure type MU-G suitable for 50 HP or 37.5 KW submersible pumping set relay max range 45-75 Amps complete as specified & directed by Engineer-in-Charge. Make : Model MU-G 50, Cat No. CS 96009 of L & T or Jyoti / GE / BCH / Havells
Supply & Fixing in repair PVC Insulated & sheathed heavy duty submersible cable flat, fully water proof multi-stranded copper conductor cable 25 Sqmm 3 core, 1100 volts grade, ISI Marked complete all as specified & directed. Make : Finolex / KEI / Havells / Grandlay / Plaza / Electron
Supply & Fixing in repair PVC Insulated & sheathed heavy duty submersible cable flat, fully water proof multi-stranded copper conductor cable 16 Sqmm 3 core, 1100 volts grade, ISI Marked complete all as specified & directed. Make : Finolex / KEI / Havells / Grandlay / Plaza / Electron
Supply & Fixing in repair MCCB 4 pole 100 Amp breaking capacity 25 KA in sheet metal enclosure including connecting to existing cable complete all as directed by Engineer-ion-Charge. Make : Havells / Legrand / L&T / ABB / Insoasian
Supply & Fixing in repair MCCB 4 pole 160 Amp breaking capacity 25 KA in sheet metal enclosure including connecting to existing cable complete all as directed by Engineer-ion-Charge. Make : Havells / Legrand / L&T / ABB / Insoasian
Supply & Fixing in repair MCCB 4 pole 200 Amp breaking capacity 25 KA in sheet metal enclosure including connecting to existing cable complete all as directed by Engineer-ion-Charge. Make : Havells / Legrand / L&T / ABB / Insoasian
Supply & Fixing in repair MCCB 4 pole 250 Amp breaking capacity 36 KA in sheet metal enclosure including connecting to existing cable complete all as directed by Engineer-ion-Charge. Make : Havells / Legrand / L&T / ABB / Insoasian
Supply & fixing in repair Contactor ML-2, 3 pole, 415 Volt, 32 Amps rating Cat No. SS90701 Make L&T or equivalent make as approved by GE.
Supply & fixing in repair Contactor ML-3, 3 pole, 415 Volt, 40 Amps rating Cat No. SS90721 Make L&T or equivalent make as approved by GE.
Supply & fixing in repair Contactor ML-4, 3 pole, 415 Volt, 70 Amps rating Cat No. SS90722 Make L&T or equivalent make as approved by GE.
Supply && fixing mild steel nut bolts & washers hexagonal or square half or full threaded 10-12 mm dia and 75-100 mm long complete all as specified & directed.
Supply & fixing in repair rubber gasket 3 mm thick packing ring suitable for 100 bore flange pipe cut type complete all as specified & directed.
Supply & Fixing in repair 150 mm bore MS coloumn pipe in three metre length having wall thickness 5.4 mm with both ends flanged and drilled 6 to 8 holes with flange packing nut bolts & washers of suitable size complete all as specified & directed.
Supply & laying in trenches / laid in floor or duct / draw through conduit XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 1100 volts grade cross-sectional area 70 Sqmm 3½ core complete all as specifed & directed.
Supply & laying in trenches / laid in floor or duct / draw through conduit XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 1100 volts grade cross-sectional area 50 Sqmm 3½ core complete all as specifed & directed.
Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan & depth not exceeding 1.5 m in any type of soil and getting out for foundation, trenches for laying of electric cable or pipes complete all as specified & directed.
Returning, filling in excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified & directed.
Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.
Material & Labour for sand cushioning with clean dry local sand [unwashed] for protection of under ground cable (8 cm before laying and 15 cm after laying of the cable) in trenches and consolidated complete all as specified & directed. Note : Punned thickness 18 cm only shall be considered for payment.
Material & Labour for sub class ‘B’ common burnt bricks old size, laid dry, flat with width equal to length of bricks as cover / laid over the cable to protection of under ground cable complete all as specified & directed.
Supply & Fixing 50 mm bore galvanised iron water tubing "light grade" ISI marked including fittings such as bends, tees, sockets etc fixed on walls / pole or laid in trenches under road crossing including taking down old existing pipe complete all as specified & directed. Note : Excavation, earth work, sand cushioning & protection work shall be measured & paid separately.
Supply & Fixing 80 mm bore galvanised iron water tubing "light grade" ISI marked including fittings such as bends, tees, sockets etc fixed on walls / pole or laid in trenches under road crossing including taking down old existing pipe complete all as specified & directed. Note : Excavation, earth work, sand cushioning & protection work shall be measured & paid separately.
Supply & Fixing in repair LED Security light fittings luminaires 90 watt with pressure die cast aluminium housing powder coated with heat resistant high effeiciency toughned glass with EPDM gasket and IP-65 protection complete assembly with power LED & driver alongwith toughned glass with necessary accessories pre-wired up to terminal block including connection on pole or building on & including 40 mm dia galvanised iron steel pipe light grade of length 1.5 RM bent to required shape with 120 degree angle fitted with 40 mm x 5 mm flat iron mild steel clamp with nut bolts & washers complete including taking down of old / unserviceble security light fitting complete all as specified & directed. Make :- Philips Cat part No. BRP410LED094 CWHEMRFGS2PSUGR or Havells Cat Part No: LHETAXU7IN6J090 / C&S : LTESS 40X2.5HPLED / Crompton Greaves Cat Part No. LSTO-90-CDL
Supply & fixing in repair commissioning & testing complete of DIGITAL WATER LEVEL INDICATION DEVICE, operating on single phase supply direct display in 19 mm size digital system in meter or cm of water over head tank ensuring alarm while water fall or rise over pre-determined limit with the following description : the entire unit must operate through a compact electronic circuit, which must ensure reliable operation at 230 Volt + 5% with reliable in digit display and alarm at low and high level or over head tank complete as directed by Engineer-in-Charge. Make : SECO type DDS-2 / Surya / Akash / Phototron.
Supply & Fixing in repair PVC Insulated FR PVC round sheathed copper conductor multi-stranded round flexible cable 1100 volts with bright annealed electrolytic base copper conductor size 0.5 Sqmm 4 core confirming to IS : 694-1990 making necessary electric connection to water level indicator complete all as specified & directed.
Supply & Fixing in repair PVC Insulated FR PVC round sheathed copper conductor multi-stranded round flexible cable 1100 volts with bright annealed electrolytic base copper conductor size 0.5 Sqmm 4 core confirming to IS : 694-1990 making necessary electric connection to water level indicator complete all as specified & directed.
Ambrish Builders
M/S VIJAY SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .