CERTAIN REPAIR WORKS TO FLOORING SKIRTING DADO INTERNAL WATER SUPPLY SANITARY AND PLUMBING WORKS CLEANING OF OVER HEAD TANKS ETC IN TECH AND DOMESTICS AREA AT BRD AF STATION CHANDIGARH UNDER GE AF MC CHANDIGARH

Amount

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge.

M & L for PCC 1:2:4 type B-2, 100 mm thick (40 mm graded stone agg ) finishing cement concre surface even and smooth without using extra cement.

M & L for PCC 1:3:6 type C-1, 50 mm thick (20 mm graded stone agg ) finishing cement concre surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the debris outside the defence land all as specified and directed by Engr-in-charge

M & L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-charge

M & L for Brickwork, except bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-charge

M&L for brick work with sub Class ‘B’ bricks straight or curved on plan exceeding 6m mean radius in half brick thick built in cement mortar 1:4 in any location, complete all as specified and as directed by Engineer -In - Charge.

M&L for filing joints with bitumen sand mastic (size 10mm width x 25mm depth) comprising 1 part of sand & 3 part of bitumen in cement concrete flooring complete all as specified and as directed by Engineer-in-charge.

M & L for Cement concrete 25 mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in floors complete all as specified & directed by Engineer-in-Charge.

M & L Machine cut kota stone slab flooring 16-18 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge

All as per item Ser No 10 but in patches in random location/scattered places

M & L for Machine cut kota stone slab in riser of steps, skirting, dado 16 to 18 mm thick over & including 10 mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge

M & L for Coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge.

All as per item Ser No 13 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge.

M & L for Coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge.

M & L for vitrified tiles light shade 10mm thick (square/rectangular) polished area of each tile 600mm x 600mm / 605mm x 605mm over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge.

All as per item Ser No 16 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge.

M & L Glazed ceramic tiles in vertical surfaces 300mm x 450mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge.

M & L Glazed ceramic tiles in vertical surfaces 300mm x 200mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick Rendering on brick, concrete or dubbed surfaces in cement mortar 1:4 finishing even and smooth without using extra cement including necessary scaffolding including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water etc and removing the debris outside the defence land complete all as specified & directed by Engineer-in-Charge

M & L for 15mm thick Rendering on brick ,concrete surfaces in cement mortar 1:6 finishing even and smooth without using extra cement including necessary scaffolding including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water etcand removing the debris outside the defence land complete all as specified & directed by Engineer-in-Charge

M & L for Rendering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection,fascia,fins,parapet etc including necessary scaffolding, ladder, formork and including taking down cement / lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed by Engineer-in-Charge.

M& L for prepaing new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer at any height including necessary scaffolding, ladder & formork etc complete all as specified and as directed by Engineer-in-Charge.

M & L for preparing new plastered surfaces of walls and applying two coats of cement base paint including necessary scaffolding, ladder & formork etc complete all as specified and as directed by Engineer-in-Charge.

M & L for Preparation of new plastered/concrete surfaces of walls and applying two coats of exterior acrylic emulsion (weather proof treatment) over one coat of primer including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.

M & L for Preparation of new plastered surfaces of walls and applying three coats of white wash including necessary scaffolding complete all as specified and as directed.

M & L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete including necessary scaffolding all as specified and as directed.

M & L for Grinding & polishing of old kota stone/ marble/ baroda green floor/skirting with machine to mirror finish in and including making good of wall finishes as per original specifications complete all as specified and directed by Engineer-in-Charge.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors as in repair complete all as specified and as directed by Engineer-in-Charge.

S & F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed by Engineer-in-Charge.

S & F for 110mm bore PVC (SWR) bends of any radius, as in repair complete all as specified.

S & F for 160mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed by Engineer-in-Charge.

S & F for 160mm bore PVC (SWR) bends of any radius, as in repair complete all as specified.

Cutting out the shurbs, plants and trees of any description and any girth and taking out the roots from the walls or roofs and making good of dismantled portion in cement mortar (1:3) complete.

S& F in repairs for Stop valves, chromium plated screwed down, high pressure, with capstan handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore.

S&F in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for Bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore.

S&F in repair for 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with (Minimum weight 15mm - 90gms), complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for 15mm dia stop valve standard of PTMT any colour, high pressure screwed for iron pipe with (Minimum weight 15mm-90gms), complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 20mm bore Stop valves, cast copper alloy screwed down high presure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm bore (minimum weight 142 gms), complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms), complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet ball valve , float and handle inlcuding brackets. complete all as specified and directed by Engineer-in-Charge

S & F in repairs for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing urinal spreader of PTMT any colour, grating and Union for discharge pipe fixed complete all as specified and directed by Engineer in Charge.

S&F in repairs for vitreous china half stall urinal white complete including fixing, bedded against wall in cement mortar 1:2 pointing around urinal back in cement fixed complete all as specified and directed by Engineer in Charge.

S&F in repairs for vitreous china white urinal partition of size 310x700 mm fixed to wall with brass CP screws fixed complete all as specified and directed by Engineer in Charge.

S&F in repairs for urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min weight 60gms) fixed all as specified and directed .

S&f in repairs for Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc fixed complete all as specified and directed by Engineer in Charge.

S & F in repairs for Vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) fixed complete all as specified and directed by Engineer in Charge.

S&F in repairs for Vitreous china wash down water closet pan, pedestal pattern, white, fixed in repairs complete including connecting to existing cistern fixed complete all as specified and directed by Engineer in Charge.

S&F in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed complete all as specified and directed by Engineer in Charge.

S & F in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore.

S&F in repair for Pillar taps standard of PTMT any colour, fancy type,high pressure screwed for iron pipe of 15mm bore (Minimum weight 110gms), fixed complete all as specified and directed by Engineer in Charge.

S&F in repair for PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, fixed complete all as specified and directed by Engineer in Charge.

S&F in repair for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specified and directed by Engineer in Charge.

S&F in repair for PVC connection 15mm dia and 75 cm long with 2 Nos PTMT nuts, fixed complete all as specified and directed by Engineer in Charge.

S&F in repair for PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB/Urinals fixed complete all as specified and directed by Engineer in Charge.

S&F in repair for Waste coupling of PTMT (half or full threaded) 32 mm bore (minimum weight 45 gms) fixed complete all as specified and directed by Engineer in Charge.

S&F in repair for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, ISI marked fixed complete all as specified and directed by Engineer in Charge.

S&F in repair for Cast iron Floor trap with grating including jointing to waste pipe with cement joint, dia of outlet 75 mm fixed complete all as specified and directed by Engineer in Charge.

S&F in repair for 75 mm PVC (SWR) pipes single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floors, walls etc complete all as specified and directed by Engineer in Charge.

S&F in repair for 75 mm PVC bends,branch piece or similar fitting as reqd to make the system functional complete all as specified and directed by Engineer in Charge.

S&F in repair for PVC Floor trap 75 mm complete all as specified and directed by Engineer in Charge.

S&F in repair for Rotational moulded polyethylene water storage tanks 500 litres capacity three layered white in colour ( clylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank.

S & F for Rotational moulded polyethylene water storage tanks 1000 litres capacity three layered white in colour ( clylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank.

S & F 15mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge.

S & F for 20mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge.

Disconnecting existing tanks not exc 500 ltr capacity setting a side or lowering if required and cleaning and removing all seal and dust it from mouth of circulating of pipe etc , the tank shall be cleaned and rinsed twice with 5%detergent solution and refixing tank at its original position complete as directed by Engineer-in-Charge.

Disconnecting existing tanks exc 500 ltr but n.exc 1000 ltr capacity setting a side or lowering if required and cleaning and removing all seal and dust it from mouth of circulating of pipe etc , the tank shall be cleaned and rinsed twice with 5%detergent solution and refixing tank at its original position complete as directed by Engineer-in-Charge.

M&L for Marble work Makrana white Marble/ white marble 15 to 17mm thick (table rubbed and polished) to mirror finish border in kota stone flooring, steps, jambs, pillars, window cills, cooking platforms and like over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble and including dismantling of existing stones complete all as specified and directed by Engr-in-Charge.

M&L for Dholpur stone with hammer dressed facework (with max depression from a straight edge held against the dressed surface not exc 20mm), about 40mm high, 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, reces pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 and including dismantling of existing floor/tiles complete all as specified and directed by Engr-in-Charge.

M&L Granite 15-17 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick Screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of same etc complete all as specified and directed by Engineer in Charge.

S&F in repair grating doom 125 mm dia with waste hole of PTMT (Min wt 40g) complete as directed by Engineer-in-Charge.

S&F repairs flexible health faucet with clamp complete as directed by Engineer-in-Charge.

S&F in repairs CP Central hole Basin Mixer with copper pipe complete as directed by Engineer-in-Charge.

S&F in repairs Wall Mixer telephonic type chromimum plated with CP wall flange complete as directed by Engineer-in-Charge.

S&F in repairs Over head shower Single flow self cleaning type with arm complete as directed by Engineer-in-Charge.

S&F in repairs of tubular towel rail brass,20mm dia D type, 60mm long between flange etc complete as directed by Engineer-in-Charge.

S&F in repairs shelf of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats. (Minimum weight-300gms) complete as directed by Engineer-in-Charge.

S&F in repair of swivel shower of PTMT any coloured for fixing with 15mm pipe (Minimum weight 40 gms)complete as directed by Engineer-in-Charge.

S&F in repairs Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooded/plastic cleats (Minimum weight 170 gms)complete as directed by Engineer-in-Charge.

Fixing only in repair 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, complete as directed by Engineer-in-Charge.

S&F in repair of PVC opening cover with hinges and locking arrangement for PVC water tank of capacity n.exc 500 Ltrs complete as directed by Engineer-in-Charge.

S&F in repair of PVC opening cover with hinges and locking arrangement for PVC water tank of capacity n.exc 1000 Ltrs complete as directed by Engineer-in-Charge.

S&F in repair for CP Toilet paper holder , complete as directed by Engineer-in-Charge.

S&F in repair for PVC bathroom cabinet Mirror 600x450mm including all necessary arrangement complete as directed by Engineer-in-Charge.

S&F in repair of 50mm bore PVC (SWR) high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm pipes single socketed, in any lenth with rubber ring joints laid in trenches or in floors complete as directed by Engineer-in-Charge.

S&F in repair for sinks with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 355 mm x 165 mm complete as directed by Engineer-in-Charge.

S & F in repair of Vitreous china one piece EWC standard size with dual flushing cistern white including 'P' or 'S' trap , fixed as complete all as specified and directed by Engineer in Charge.

Disconnecting existing tanks exc 1000 ltr but n.exc 2000 ltr capacity setting aside or lowering if required and cleaning and removing all seal and dust it from mouth of circulating of pipe etc , the tank shall be cleaned and rinsed twice with 5% detergent solution and refixing tank at its original position complete all as directed by Engineer-in-Charge.

M&L for preparation of old plastered/concrete surfaces of walls and applying one coat of oil bound distemper, white or tinted etc complete all as specified and directed.

M&L for preparation of old plastered/concrete surfaces of walls and applying one coat of cement based paint etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash etc complete all as specified and directed.

M/s Bhagwati Enterprises

M/S NAVEEN PATHANIA

M/S GOYAL ASSOCIATES

MS SACHDEVA BUILDERS

RAM CHANDER CONTRACTOR

BAKSHI CONSTRUCTION CO.

HARISH SALES CORPORATION

Ashoka Brothers