Tender for annual repair and maintenance of civil works in residential buildings at Samoli and Nogli under ES SubDivision Nogli

Amount

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the materials materials within 50 metres lead of :

G.S. Sheet

Asbestos cement sheet

Dismantling doors, windows and clerestory windows (steel or wood) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 50 metres lead.

Of area 3 sq. meters and below

Taking out existing wooden door shutter, repair by cutting, painting extra and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer - in - charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, boalts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet with white lead, including a coat of approved steel primer and two coat of approved paint of overlapping of sheets complete (up to any horizontal/vertical or cuved surfaces), excluding the cost of purlins, rafters and trusses and including cutting the size and shap wherever required.

0.63 mm thick with zinc coating not less then 275 sqm/m2

Providing & fixing of 40 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G. I. limpet and bitumen washers complete, bent to shaps and fixed in wall with cement morter 1:3 (1 cement: 3 coarse sand).

1.00 mm thick with zinc coating not les than 275 sqm/m2

Providing and fixing plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatalety).

6 mm thick Cement bonded wood particle board as per IS: 14276

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Sal wood

Providing and fixing panelled or panelled glazed shutters for doors windows and clerestory windows fixing with butt hinges of required size with necessary screws excluding panelling which will be paid for seprately all complete as per direction of Engineer incharge

Second class teak wood

35 mm thick shutters

30 mm thick shutters

Renewing glass panes and refixing existing wooden fillets

Float glass panes of nominal thickness 4 mm ( weight not less that 10 kg./sq.m

6 mm cement plaster 1:3 ( 1 cement : 3 sand fine sand) finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of RCC slab and beams

15 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement on the rough side of single or half brick wall

Providing and fixing C.P. brass bib cock of approved quality confirming to IS : 8931

15 mm dia nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality confirming to IS standard and weighing not less than 810 grms

15 mm dia nominal bore

Providing and fixing C.P. brass stop cock ( concealed ) of standard design and of approved make confirming to IS : 8931

15 mm dia nominal bore

Providing and fixing C.P. brass angle cock for basin mixer and geyser points of approved make confirming to IS : 8931

15 mm dia nominal bore

Providing and fixing 8 mm dia C.P. / S.S jet with flexible tube upto 1 metre long with S.S. triagular plate to European type W.C. of quality and make as approved by Engineer-in-charge

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) confirming to IS : 7231 with all fittings and fixtures complete

10 litre capacity White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete

White solid plastic seat with lid

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-B.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single door-8 way

ABS INFRATECH AND INVESTMENT

M/s rachin chaudhary