SPL REPAIR TO BLDG NO T-65, T-70 AND T-94A

Amount

Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillet complete all as specified and directed.

M&L for 4mm thick plain AC building boards fixed to timber frame work fixed with screws in ceiling complete all as specified and directed. Make :- Charminar, Everest, Ramco.

All as per Srl item No 03 above but except board complete all as specified and directed

M&L 2nd class hardwood plaint fillets, square, rectangular or tringular in section clean sawn, secured with rails or boards n exc 3 sqcm complete all as specified and directed.

M&L three coat of white wash on new ceiling surface including preparation complete all as specified and directed.

M&L one coat of white wash on old ceiling surface including preparation complete all as specified and directed.

Dismantling of plain or corrugated AC sheeting, any guage, thickness, including Nainital or similar pattern roof covering.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws in any position complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws in any position complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.

M & L for timber scantling of second class hard wood framed work as fixed with nails (clean sawn) complete all as specified and directed

All as per srl item No 12 above except timber second class hard wood in scantlings.

M&L Preparing surfaces of wood and wood based materials , new or old , of any description and girth , not otherwise described and treated with creosote oil complete all as specified and directed.

Pcc 1:2:4 type B-1, copings,, kerbs provided for water troughs and the like including weathering , slightly rounded or chamfered angles and throating, as directed.

Taking down steel/wooden window/ ventilator of any size.

S&F steel window 1.25mm thick box type(primer coated) ERW hollow P section of size 60mmX25mm double rebated comprises guaged skelton & glazed shutter including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1(four Nos for each window) including following fitting welded to frame shutter:- (i) Hold fast,150mm long of MS FI 12mmX3mm made to shape-04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-o1Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-1020/08 (vii) M S guard bar 12mm square bars @ 60mm C/C fixed horizontlly.

S&F MS box type window/ventilator fixed type with glazed bar without wire work and glass as per Drg No CE JZ/TD-1019/08 with guard bar including priming coat complete all as specified and directed.

M&L Preparation of old &new or previously un treated surface of steel and applying two coat of synthetic enamel paint & one coat of red oxide complete all as specified and directed.

Taking down chowkats or frame with shutter of size exc 1.50 Sqm but n exc 4.0 Sqm each.

S&F pressed steel frames 1.25 mm thick for door size of frame 165 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface ) of chowkats and hinges complete all as specified and directed.

S&F 2nd class hard wood (Hollock) 35mm thick factory made plain paneled shutter (One panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part-I) kiln seasoned chemically presure treated.

S&F 2nd class hard wood (Hallock) (Factory made) Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc , sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.

S&F in repairs GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane glazing with oil putty complete all as specified and directed

M&L for preparing of new wood & wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F Mild steel sliding door bolts 300mm long, clip type stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete

S&F 125mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fised complete all as specified and directed.

S&F 100mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F in repairs 2.5mm dia of Plain mild steel wire , galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts , including securing with and provision of galvanised iron tying wire, galvanised wire staples or steel pins, etc such as for mosquito net . as directed ( each line of wire to be measured)

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L for 50mm thick PCC 1:2:4 type B-1 (20 mm graded aggregate) as in plinth protection/path laid in alternate bays, finishing even and smooth complete all as specified and directed

Demolition for stone slabs and tiles of any description or thickness in floors, aprons incl Laid, bedded and pointed in any mortar etc.

S&F machine cut Kota stone slab flooring 20 -25mm thick over cement screed bedding 20 mm thick in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing (with bees wax polish) complete all as specified and directed.

Taking down cement plaster of any description on brick walls etc including raking out joints, hacking for key scrubbing down with water and removal of depositing material .

M&L for 15mm thick cement plastering in CM 1:4 on brick or concrete surface fair finished the surface even and smooth without using extra cement complete all as specified and directed.

All as per Srl item No 38 above but CM 1:6.

M&L for preparation New wall surfaces and applying two coat of cement base paint & one coat of primer complete all as specified and directed.

M&L for preparation New wall surfaces and applying two coat of Oil Emulsion (OBD) & one coat of primer complete all as specified and directed

M&L for preparation of old plastered surface by complete removal existing treatment and applying two coat of cement base paint over one coat of primer complete all as specified and directed

M&L for brick work with sub class 'B' brick straight curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

All as per Srl item No 43 above but except brick.

Demolition of brick work/ precast concrete block walling/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed

M&L for preparation of old plastered surface by complete removal existing treatment and applying two coats of OBD over 1mm thick wall putty incl a coat of cement primer complete all as specfied and directed.

M&L two coat of white wash on old wall surface including preparation

M&L for three coats of white wash on new wall surface including preparation complete all as specified and directed.

S&F 15mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

Dismantling water tanks Exc 500 Ltr & not exceeding 1000Ltr and S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Taking up or down GI pipe15mm bore including fittings, connections, including cleaning complete all as specified and directed

S&F GI tubing 15mm bore “medium grade” with all fittings complete fixed to wall/ ceiling or laid in floors complete all as specified and directed

All as per Srl item No 52 above but fixing only with new fittings.

Taking up or down GI pipe 20mm bore including fittings, connections, including cleaning complete all as specified and directed.

S&F GI tubing 20mm bore “medium grade” with all fittings complete fixed to wall/ ceiling or laid in floors complete all as specified and directed.

All as per Srl item No 55 above but fixing only with new fittings.

S&F in repair stop valves, 15mm bore cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

All as per Srl item No 57 above but 20mm bore.

S&F in repairs 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

S&F glazed ceramic dark coloured tiles 350x250x7mm/ 450x 350x 7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface and taking down of old existing treatment & plaster, scrubbing down with water and disposing off the wastage to low laying areas to a distance exceeding 50 Mtr but not exceeding 100 Mtr away complete all as specified and directed. Make:- Orient,Kajaria,Bell ceramic Johnson

S&F Non Skid ceramic coloured tiles 7mm to 8mm thick squared /rectangular area of each tiles, exc 0.11 aqm but n exc 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and 15mm screed in CM 1:6 Make:- Orient Bell ,Kajaria,ceramic Johnson

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling of roof brick tiles fixed in cement mortar in single layer.

Demolition mud phuska in roofs any thickness including plastering and leeping complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone agg in padding of roof averaging thickness 50mm complete all as specified and directed.

M&L for 3 mm APP modified membrance of wt not less than 3.0 kg/sqm tourch shield using gas burner including 150 mm side lap over 0.30kg/sqm bitumen primer as in roof treatment over PCC padding on roof including cleaning the surface complete all as specified and directed.

M&L for 40mm thick brick tile laid over 15mm thick bedding layer , grouting CM(1:6) and raking and pointing with CM (1:3) with crude oil 5% wt of cement complete all as specified and directed.

All as per Srl item No 67 above but except tiles.

S&F wash hand basin of size 450 x 300 mm with 32 mm dia wate coupling and waste pipe including 15 mm CP pillar tap CI bracks complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F for PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc as spd and fixed in repair.

S & F in repair 18/19 mm block board grade I quality exterior grade commercial type fixed with screws to timber frame work complete all as specified and directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F but hinges med weight cold rolled mild steel 100mm size complete all as specified and directed.

S&F 75 mm Hasp and staple, safety type, Aluminium anodisedbrass with mild steel hinge pin including bolt to hinge plate and fixed with screws.

M&L for Chequred cement concrete tiles coloured 30cmx30cm x25mm thick, set jointed and pointed in neat cement slurry with grey cement and no pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for cement concrete 100mm thick in foundation filling and mass concrete type C-3, 1:3:6 (using 40mm stone aggregate) complete all as specified and directed.

E/M PORTION Taking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches. Ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc.

M & L point wiring with PVC insulated, unsheathed multistranded copper conductor cable of size 1.5 Sqmm, FR through and including concealed PVC conduit with fittings and PVC insulated, unsheathed multistranded, copper conductor cable continious earth wire of size 1.5 sqmm, FR, connected to common earth and modular sunken boxes for mounting of accessories complete for one light point/fan point/ call bell point controlled by one one way swithch all as specified and directed. Note :- Cost of making good the disturbed surface plastering/filling putty alongwith matching with the existing colour with MES Approval make of distemper is deemed to be included in the quoted rate by contractor. One light/fan/bell point controlled by one one way modular switch,

All as per Srl item No 81 above but one modular socket 6A multipin 2 module on independent board.

All as per Srl item No 81 above but one modular socket, 6A multipurposes 2 module on same board.

M & L point wiring with PVC insulated, unsheathed multistranded copper conductor cable of size 2.5 Sqmm, FR through and including concealed PVC conduit with fittings and PVC insulated, unsheathed multistranded, copper conductor cable continious earth wire of size 2.5 sqmm, FR, connected to common earth and modular sunken boxes for mounting of accessories complete for one modular socket 6A multipin 2 module on independent board complete all as specified and directed. Note :- Cost of making good the disturbed surface plastering/ filling putty alongwith matching with the existing colour with MES Approval make of distemper is deemed to be included in the quoted rate by contractor.

M&L for sub main wiring with two single core multi stranded PVC insulated, unsheathed copper conductor of grade 1100 Volt , FRLS cable of size 6 sqmm (red for phase and black for neutral) and including electrical grade PVC conduits of desired colour not less than 1.2 mm thick and 25 mm wide & 6 sqmm multistranded copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth duly complete and taking down old unserviceable one. Note :- (a) Cost of making good the disturbed surface plastering/filling putty alongwith matching with the existing colour with MES Approval make of distemper is deemed to be included in the quoted rate by contractor. (b) Three run of cable alongwith PVC conduit together shall be measured as single run.

S&F modular switch one way ,1 module 6 amps single pole complete all as specified and directed.

S&F modular socket 6A multipin 2 module complete all as specified and directed.

S&F modular switch one way 16 amps one module single pole complete all as specified and directed.

S&F modular socket, 6A/16A multipin combined 2 module complete all as specified and directed.

S&F in replacement surface mounting universal batten housing made of powder coated CRCA sheet fixed on and including 02 Nos PVC square blocks suitable for and upto 1 x 18/20 W LED tube rod single sided in l taking down old unserviceable fitting complete all as specified and as directed.

S&F LED tube light 20W (single sided connection) ultra bright LED polycarbonate tubelight with very high efficacy suitable for fitting into existing/ new tube light batten fittingt all as directed Note :- The contractor will submit the LM-80 and LM-79 report from manufacturer to Engineer-in-Charge before incorporating the items in work.

Taking down carefully ceiling fan/exhaust fan complete fittings at site removing Fans are diposited to mes storeyard and re-fixing after completion of work at the site .

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete including single coat of enamel paint and one pair of Canopy.

S&F in replacement of modular fan regulator 2 module electronic type 5 step 100watt, 240 Volt and connecting complete all as specified and directed all as directed.

S&F lamp holder PVC body angle type including 9 watt LED bulb polycarbonate body complete all as specified and directed.

M&L ceiling rose, surface bakelite 65x50mm three terminal .

S &F modular white cover plate with frame, 1/2 module complete all as specified and directed.

S &F modular white cover plate with frame, 3 module complete all as specified and directed.

S &F modular white cover plate with frame, 6 module complete all as specified and directed.

S &F modular white cover plate with frame, 12 module complete all as specified and directed.

S &F modular metal flush box, 1/2 module complete all as specified and directed.

S &F modular metal flush box, 3 module complete all as specified and directed.

S &F modular metal flush box, 6 module complete all as specified and directed.

S &F modular metal flush box, 12 module complete all as specified and directed.

S&F in replacement GI pipe bracket made out of GI pipe light grade 32 mm dia and bend to shape 1.5 mtr long MS clamps made out of MS flat iron of size 32 mm thick with nuts & bolts, washers complete including dismentling the existing GI pipe bracket and drilling of holes for nuts & bolts etc all as specified and directed

S&F new generation energy saving 45 wall LED building light IP 66, luminiaries with long life versatile pressure die-cast aluminium, housing with high power LED as lighting source and lens embeded PC cover road way luminaire complete all accessories, connecting up with three core flexible copper conductor cable complete all as specified and directed.

Supplying and fixed in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 12 way with 200 amps rated bus bar SPN double door complete all as specified and directed. Note : All the connection of incoming and out goiing wire in MCB will be made with thimble with suitable size as directed.

S& F in repair MCB single pole 6 amps to 32 amps , 'B' series complete all as specified and directed.

All as per item Ser No 108 here-in-before but 'C' series complete all as specified and directed.

All as per Item Ser No 108 here-in-before but single pole and neutral 32 to 63 amps , C series complete all as specified and directed.

All as per Item Ser No 108 here-in-before but tripple pole and neutral 32 to 63 amps , C series complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core.

Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out all as specified.

Returning filling including spreading and well ramming in layers each n.exc 25 cm thick in soft loose soil all as specified.

Removing excavation material n. exc 50 mtr and depositing wher directed at a level n. exe 1.5 mtr above the starting point.

Supply and lay brick common burnt sub class "B" old size and for protection of cable laid in trenches for under ground cable all as specified.

M & L Sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified

M&L for cable protection GI tubing light grade fixed long the pole/under road/along the wall of size 40 mm bore with necessary clamps all as directed.

KAILASH CONSTRUCTION CO

M/s SODHI SALES CORPORATION

RAM CHAND SAINI & BROS.

M/S SHRI RAM BUILDERS

om parkash and sons