WBPWD/EEII/NKHED/NIQ-76/19-20

Amount

Supply & delivery 2.0 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1 No. Rotary compressor, 1 no. IDU of rated power supply -230V-1ph-50Hz., 1 no. ODU of rated power supply - 230V, 1ph, 50Hz. Air-flow/per IDU:- 800 CFM with 410A refrigerant (Make: Hitachi / Mutsubishi Electric / O-General / Daikin)

Supply & delivery 1.5 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 18000 BTU/hr. with 1 No. Rotary compressor, 1 no. IDU of rated power supply -230V-1ph-50Hz., 1 no. ODU of rated power supply - 230V, 1ph, 50Hz. Air-flow/per IDU:- 600CFM with 410A refrigerant (Make: Hitachi / Mutsubishi Electric / O-General / Daikin)

Supply & delivery 1.5 TR capacity Window type Air Conditioner of rated cooling capacity of 18000 BTU/hr. with 1 No. Rotary compressor of rated power supply -230V-1ph-50Hz., Air-flow/per IDU:- 600 CFM (Make: Mutsubishi Electric / O-General / Daikin)

Supply & delivery 2.0 TR capacity Window type Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1 No. Rotary compressor of rated power supply -230V-1ph-50Hz., Air-flow/per IDU:- 800 CFM (Make: Hitachi / Mutsubishi Electric / O-General / Daikin)

Installation , testing & commissioning of 1.5 Tr./2 Tr. Window type Air Conditioner on existing position with S & F of new good quality teak wood frame & painting , mending good the damages as per direction of EIC.

Installation , testing & commissioning of 1.5 tr./2 Tr. Split Air Conditioner both indoor/outdoor unit incl. S&F of 40x40x5mm MS angle iron frame for installation of ODU and sealing the holes in wall create during the copper pipe connection between the IDU & ODU by proper sand -- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages.

Supply & laying of (i) copper pipe 5/8'' with 0.7mm thick for suction ( ii) copper pipe 1/4"with 0.6mm thick for liquid line (OEM make) with 9mm thick nitrile rubber tube both for suction & liquid line and mending the holes & damages as directed by EIC for 2 Tr Split AC.

Supply & laying of (i) copper pipe 1/2'' with 0.7mm thick for suction ( ii) copper pipe 1/4"with 0.6mm thick for liquid line (OEM make) with 9mm thick nitrile rubber tube both for suction & liquid line and mending the holes & damages as directed by EIC for 1.5 Tr Split AC.

Control Cabling from Condensing Unit to Control Panel, 4 Core 2.5sq. mm. Communication Cable (Mk. Finolex / Havell's)

Control Cabling from Condensing Unit to Control Panel, 3 Core 2.5sq. mm. Communication Cable (Mk. Finolex / Havell's)

S&F of flexible PVC high quality water drain pipe of 20mm size for draining water from already installed AC to any available (nearest) drain water pipe or near to ground level and the pipe must be properly saddled with the wall incl. proper insertion of the flexible pipe to drain water pipe and sealing the entry with required materials like PVC tape, high quality sealing gum etc. as reqd. All these arrangement for fixing must be arranged by the agency itself as per direction of EIC.

Supply and fixing flexible double canvas connection for concealed split air conditioner.

Dismantling the existing A.C Machine (including electrical connection) both indoor & outdoor and submit the same to PWD Section office as per direction of EIC

Charges for scaffolding arrangement including lifting for out door & indoor unit.

Cutting of Grill of a window (if needed) and mending good the damages by making door arrangement for permanent access to ODUs.

Special Terms & Conditions :- i) The Agency must procure the materials from the Manufacturer / OEM or from their authorized. Sales channel so that the standard warranty / Support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. ii) Documents that authenticates such procurement form the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM /authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work/submission of bill. iii) If any refurbished material is supplied and installed, panel action will be taken as per existing rules. iv) After completation of work Agency Supervisor has to certify fittness af all Electrical Installations done under this Tender. This is mandatory before peparations of Final Bill.

(Rate should be quotated including all taxes and duties)

P. M. COOLING AND ENGINEERING CO

Lyric International