UPGRADATION OF JCOs/ OR MD ACCN AT OCV AND SPECIAL REPAIR TO OR MD ACCN TO SPECIFICALLY ADDRESS SEEPAGE/ LEAKAGE, EFFORESCENCE AND SUNKEN FLOOR TREATMENT ETC AT RANA SANGA ENCLAVE AND ADDN/ ALTN TO WIRING OF BLDG UNDER GE KALUCHAK

Amount

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door ceostory windows & other Frames/chowkhats of size 50x100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threated star headed SS Screws having minimum frame density of 750Kg/Cum screw withdrawal strength of 2200N (face) & 1100N (Edge), miniumum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/Lugsor SS dash fasterners shall paid for separately).Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Varriation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified & directed.

S&F Factory made double extruded WPC (Wood Polymer Composite) solid door ceostory windows & other Frames/chowkhats of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threated star headed SS Screws having minimum frame density of 750Kg/Cum screw withdrawal strength of 2200N (face) & 1100N (Edge), miniumum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/Lugsor SS dash fasterners shall paid for separately).Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Varriation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M & L for PCC 1:2:4 type B-1 using 20 mm graded aggregates as in anchoring hold fast, parapets, copoing, apex plates, bed plates and the like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

M & L for Factory made single extruded WPC (Wood Polymer Composite) solid wiremesh shutter of 30mm size comprising of virgin polymer of value 58-60 (Suspention Grade), calcium carbonate and natural fibbers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed.

S&F factory made single extruded solid UV Rinted decorative type flush door shutter of size 35mm thick comprishing of virgin polymer of K valve 58-60 9suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength 50N/mm2, modulus of elasticty850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borger proof, water/mpisture proof and free retardnat. WPC to be laminated with PVC foil of minimum 14 micronsthick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws, complete all as specified & directed. Note : (Stainless steel butt hinges and neessary SS screws shall be paid separarately).

M & L for PCC 1:3:6 type C-1(using 20mm graded crushed stone aggregate) as in back fill of chowkhats and bed blocks for hold Fasts etc, complete all as specified and as directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

M & L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification in SSR Part-I, complete all as specified and directed.

M & L for 35 mm thick of 2nd class hard wood glazed and skeleton shutter , open rebated and preparation to receive glass gauze etc,( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitre beads for securing glass etc, size of members of shutter as but panelled shuuetrs (bottom portion) & partly skelton shutter (top portion) suitable for fly proofing complete all as specified and directed.

S & F in rapairs for butt hinges, medium weight, cold rolled mild steel, 100 mm size, complete all as specified and directed.

S & F Aluminium alloy sliding door bolt, 300 mm,anodized with hasp, staple (bolt type) and fixing clips of sheets,bolts and sliding bolts of extruded sections complete all as specified and directed. .

S & F Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 150mm long complete all as specified and directed.

S & F in repairs Aluminum Handle cast type anodized of size 100mm complete all as specified and directed.

S & F Aluminum anodized barrel tower bolt of extruded section and fixed complete of Size 100 mm long complete all as specified and directed.

S & F Aluminum anodized barrel tower bolt of extruded section and fixed complete of Size 100 mm long complete all as specified and directed.

S & F Aluminium handle cast type anodized of size 150mm complete all as specified and directed.

S & F Aluminum Handle cast type anodized of size 100mm complete all as specified and directed.

Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

S & F for Hasp and staple, size 75mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F for Mild steel stone enamelled Helical door spring 150mm size fixed to pressed steel frame/chowkhats including necessary fitting complete, complete all as specified and directed.

S & F for Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

S& F for Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed.

M & L for 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each, complete all as specified and directed.

M & L for cutting chases in brick wall, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 20cm girth complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as specified and directed.

S&F 15mm nominal bore of pipe in walls, and ceiling , jointing and testing galvanised mild steel water tubing “medium grade” with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed.

Supply & fix Unplasticised PVC pipes, bore (inner dia) of pipe of in 15 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. Note :- The rate for pipe including all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening/connections such as Bib taps/Stop valve etc, complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, all as directed.

S&F 20 mm nominal bore of pipe in walls, and ceiling , jointing and testing galvanised mild steel water tubing “medium grade” with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed.

Dismantling water tanks of any description, exc 500 & nexc 1000 litre capacity and removing from site.

S & F for Rotational moulded polyethylene water storage tanks. (cylindrical vertical with closed top ) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity , all as specified in SSR Part-I, complete all as specified and directed.

Supply and fix in repair ball brass valve, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete of 20 mm bore dia complete all as specified and directed.

S & F for Bib tap, 15mm bore long body, fancy type, chromium plated, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified & directed.

S & F in repair brass CP wall mixer for mixing hot & cold water screwed down for 15 mm bore pipe and fixed all as specified and directed

S & F in repairs of Stop/Angle valves, cast copper alloy, 15mm bore (concealed type), screwed down, high pressure with capstan head, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

S & F for Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repairs, complete all as specified & directed.

S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed

M &L Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters including 3 mm thick Glass panes, Stainless steel wiremesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/CE-TD /31 & 32/2013 sheet 1 & 2, including one coat of red oxide zinc primer, complete all as specified and directed .

S & F 32 mm dia low density polythylene pipes (LDPE) of pressure rationg 6 kgf/cm2 suitable for waste pipe etc fixed complete to wall ceiling or floor etc complete all as specified and directed.

Supply and fix in repair brass CP sink mixer for making hot and cold water screwed down for pipe and fixed complete all as specified and directed.

S & F for grating doom 100mm dia with or without holes (minimum weight 25 gms) complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.

Supply and fix Vitreous china wash down water closet pan (Pedestal pattern EWC), white including 'P' or 'S' trap with white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500mm long PVC pipe, health faucet (ABS Body) mild steel chromium palted ( including seat covers fittings) complete all as specified and directed.

Demolition of cement concrete in and paving (un reinforced) exc. 15 cm. thickness, below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authorities complete all as specified & directed.

M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :- Base Coat : Berger HS Latex plus (or equivalent) consumption base coat : 0.3 kg/m2 Reinforcement : Glass fiber Second and Third coat : Latex sheild 2K (or equivalent) Consumption top coat : 3 kg/m2 System reqquirements : density : 2.00 kg/ltr; Compressive strength: 0.5N/mm2 Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent). Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft. All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry. Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'CD' on page no. 112 of tender documents as per Sch 'A' Note No 19 Page No 17).

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound tobe finished even and smooth without using extra cement complete all as specified and as directed (WPC to be measured and paid separately) complete all as specified and directed.

Supply only Integral water proofing compound liquid complete all as specified and directed.

S&F 20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out rsidual water out from the treated area.

M&L for hard core, of broken stone or boulders to gauge n exc 63mm deposited , spread and levelled in layers n exc 15cm thickness waterd and rammed to atrue surfaces complete all as specified and directed.

M&L Cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete in sub base complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B1 with 20mm graded aggregate for laying floor tiles complete all as specified and directed.

Demolition of cement concrete in and paving (un reinforced) exc. 15 cm. thickness, below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authorities complete all as specified

Taking down cement plaster on bricks or stone wall/ decayed surfaces of concrete from roof projection or RCC Chajjas etc. including racking out joints, hacking for key, scrubbing down with water, etc including removing the waste out of defence land all as specified and as directed.

M&L for capilary rise treatment of walls as following :- Base coat: Berger HS Latex plus (or equivalent) Consumption base coat: 0.3 kg/m2 Second and Third coat: Latex sheild 2K (or equivalent) Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr Compressive strength: 0.5 N/mm2 Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'AB' on page no. 108 of tender documents as per Sch 'A' Note No 19 Page No 17).

M&L Rendering 15 mm thick on fair faces of brick/concrete surfaces in cement plaster 1:4, using water proofing compound mix as per manufacturer detail, complete all as specified and as directed. (WPC measured and paid seperately)

Supply only Integral water proofing compound liquid complete all as specified and directed.

Supply and fix in repair PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float and handle including PVC connection 15 mm size with PTMT nuts of length 600 mm long all as directed complete all as specified and directed.

Supply and fixed in repair PVC connections 15mm size with PTMT nuts of length 450mm, fixed in repairs, complete all as specified & directed.

S & F towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified & directed.

Supply and fix in repair CP soap dish complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Stainless steel sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union, waste coupling, plug & chain, 32mm dia PVC flexble waste pipe etc. and overall size 915x460mm with bowl size 410x330x160mm, complete all as specified & directed.

Supply and fixing in repair stainless steel plate rack of size 750x600x250mm made out of 1mm thick stainless steel having partitions as per sample, complete all as specified & directed.

Supply & fixing Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repair complete all as specified & directed.

S & F Corner type wash hand basin, round,white of size 400 x 400 x 125 mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets and PVC waste pipe with union, flexible suitable for wash hand basin or urinal, 32 mm dia, complete all as specified and directed.

Demolition of brick work masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

M & L for Brick work with sub class ‘B’ bricks, (old size) straight or curved on plan exceeding 6m mean radius built in in CM 1:6, but except bricks complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.

M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing neat cement slurry with 3.0kg of cement per Sq. Metre complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry including 15mm thick screed bed in CM 1:4 and pointed in coloured cement match the colour of tile all as specified and directed.

M & L for Non skid ceramic tile 7 to 8mm thick area of each tile exc 0.18 sqm but not exzc 0.38 sqm on vertical surfaces such as skirting / dado etc. bedded & jointed in neat cement slurry over and including 10mm thick backing coat in CM 1:4 and pointed in coloured cement to match the colour of tile, complete all as specified and directed.

M&L for non skid coloured Ceramic tiles 8 to 10 mm thick in light shade (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors/Skirting etc. set, jointed and pointed with Berger HS tile adhesive anti slip white @1.2kg/sqm thickness upto 8 to 10mm (or equivalent) and epoxy material for sealing of tile joints with Epoxy tile grout to the floor of toilets and bathroom complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed .

M & L for Machine cut kota stone slab flooring 15-20 mm thick over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as directed.

M & L for Machine cut Kota stone 15-20 mm thick in riser steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing mirror finish and polishing including15 mm thick screed in CM 1:4. complete.

M&L 18 to 20 mm thick Granite black work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.

M & L for Glazed coloured ceramic tiles on vertical surfaces of size 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M & L for 50mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 3.0 m in length and joint shall be made at every turning / corners, complete all as specified and directed.

M & L for 75 mm thick plain cement concrete1:2:4, type B2, using 40 mm graded stone aggregates as in floors surfaces finished even and smooth with out using extra cement all as specified and directed.

M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design and pattern as in footpart, park lawns , drive ways or light traffic parking etc, of required strength , thickness and size/shape made by table vitratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibrator compaction by using plater vibrator compaction by using plater vibrator , filling the joints with sand and cutting paver blocks as per required size and pattern , finishing and sweeping cement all as specified and directed.

M & L for Rendering 5mm thick in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified.

M & L for Rendering 15 mm thick in cement mortar 1: 6 othrthan faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified.

M & L for Rendering, 15 mm thick on brick / concrete surfaces in cement mortar 1:4, mixed with water proofing compound surfaces finished even and smooth using extra cement complete all as directed & directed.

Material and labour for complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/ chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ ceiling by filling cracks by Berger Bison Putty/ crack fill paste of Berger Paints or equivalent make and make good smoothen surfae by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted)/10 sqm mtrs diluted with water in 1:1 ratio as per manufacture's instruction and all coats incl primer to be applied with fuly automatic airless spray machine of paint appliaction with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed. Allow 6-8 hrs to dry the surrface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and directed Make : Berger Paints Weathercoat Long Life Flexo/ Nerolac Paints excel Total/ Asian Paint Apex Ultima/ JK Maximo Ultra Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'EF' on page no. 116 of tender documents as per Sch 'A' Note No 19 Page No 17).

M&L for preparation of newly plastered surface of wall & applying 3mm thick Acrylic wall care putty on wall surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper, white or tinted shade , complete all as specified & directed.

M&L for preparing of plastered surfaces of Ceiling, old decorated surfaces and applying two coats oil bound distemper complete all as specified and directed.

M & L for Complete removal of old decorated plastered of wall by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying two coats of oil bound emulsion over One coat of wall putty on wall complete all as specified & directed.

M&L for preparing newly plasterd surface plastered or unplastered of o surfaces with two coat oil bond Distemper emulsion paint as in ceilings complete all as specified and directed.

M & L for preparation of old previously untreated wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified & directed.

M & L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint, over a one coat of primer complete all as specified & directed.

M & L for preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified and directed.

M & L for preparation of new plastered surface and applying two coats of weather proof exterior emulsion paint of anti fungal nature over one coat of alkali resistant primer on walls complete all as specified and directed . Note : The work will be carried out upto tripple storey building, the rate of scafolding is included for this item also.

M & L for complete removal of existing treatment of wall surfaces and applying One coat of weather proof exterior emulsion paint of anti fungal nature on walls complete all as specified and directed . Note : The work will be carried out upto tripple storey builing the rate of scafolding is included for this item also weather coat paints complete all as specified and directed.

Preparation of new or untreated surfaces of wood or wood based surfaces of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

S & F in repair 20 mm dia aluminium anodised tubular curtain rail , including one pair of fixing brackets complete all as specified and directed.

S & for Stainless steel curtain rod fancy type globe of both side of curtain rod . including one pair of fixing brackets as per sample kept in office of the GE complete all as specified and directed.

S & F for PVC mirror cabinet of size 16" X 16" with napkin rail in ivory colour complete all as specified and directed.

M & L for taking down cement plaster and decayed concrete of any description, upto double storey of building, from roof projection, chajjas etc and making good the decayed portion with cement mortar 1:3 mixed with water proofing compound or mixed with WPC or PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) including necessary form work where ever required and finally finishing the surface with 15mm thick cement plaster in CM 1:3 and applying two coat of white wash/colour wash/cement base paint/exterior emulsion paint to match the existing surface/finish, complete all as specified and directed.

Complete removal of existing old roof treatment surface (i.e Brick tile /old APP) and preparation of old concrete surface by picking sweeping , cleaning and washing down with water, remove dust etc complete all as specified and as directed

M & L for Rendering 15mm thick in cement mortar 1:4 on roof/concrete surfaces finished even and smooth with out using extra cement, complete all as specified and directed.

Material and labour cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate ) as in roof padding including preparation of surface and mix with water proofing compound and fair without using extra cement, for sloping complete all as specified(WPC shall be measured and paid separately).

Supply only Liquid water proofing compound complete all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25mm grade @ 1.20 kg/sqm sqm over a primer coat including cleaning of the surface of any foreign material complete all as specified and directed.

Complete removal of existing roof treatment or roof file and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified and directed.

Cleaning of the exposed concrete slab and repairing the surface irregularties like cracks, pathholes as per manufacturers method and cement in mixing ration of 1:4 where ever required all as specified and directed.

M&L for Home Sheild PU Roofkoat (or equivalent) is a one component liquid, solvent free, cold applied water-proofing membrane that is highly elastic and UV resistant with 10 years warranty. ASTM D 6083-97 a waterproofing and heat reflecting system having following key performace properties : 1. UV resistant, prevent yellowing and weathering 2. Highly elastic upto 350% and crack bridging 3. Excellent adhesion on porous and non-porous substrates 4. Tensile strength > 10 N/mm2 with Geo Textile fleece 5. Soler reflective Index (SRI) more then 109-111 ASTM E 1980-11 System : First coat : Providing and applying primer over the prepared surface with HS PU roofkoat Primer (or equivalent) Coverage :0.2kg/m2 (with 50 % dilution of water) Reinforcement : Geotextile 40 gsm Second coat : Home sheildroofkoat (or equivalent) Consumption : 0.5 kg/m2 Third coat : HS PU roofkoat (or equivalent) Consumption : 0.8 kg/m2 System buildup-1.5kg/sqm with geotextile of 40 gsm For accessible roof, tiles with scred/ adhesive may be fixed thereafter. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'GH' on page no. 120 of tender documents as per Sch 'A' Note No 19 Page No 17).

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors similar work con- forming to Fe.290.Gde-E-165, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L for Mild steel, plain, black sheet 1.25mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S& F for Mild steel sliding door bolts, 300mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified & directed.

Supply and fix in repair PVC (SWR) floor trap75 mm, with steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.

Supply and fixed in 75 mm dia PVC SWR pipe, single socketed in any length fixed in floor/wall and connected nahani trap including clamps for fixing complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

Supply and fix in repairs 75 mm bore PVC (SWR) branch piece single (single Y) equal or unequal complete all as specified and directed.

Supply and fix in repair 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

Supply and fixed in repairs 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed including for fixing clamps to walls complete all as directed. .

Supply and fix in repairs 110 mm bore PVC (SWR) bend, any radius complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for laying of cable/GI pipe/concrete pipe etc. not exc. 10 Sqm on plan and getting out in any type of soil complete all as specified and directed.

M & L for cement Concrete 1:3:6 type C-2 bed drain pipes incl packing under and hanuching against the sides of pipes after they laid and tested (150mm bore pipe)

S & F of 150 mm bore reinforced concrete pipe class NP-3 laid, jointed with collar in neat cement slurry complete all as specified and directed .

Removing surplus excavated material to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drains , making good to pipe and retendering, cutting out existing benching for and forming branch channel (½ round or ¾ section ) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for internal dia of pipe 150mm, complete all as specified and directed.

E/M Portion

M & L for cutting into existing manholes for connecting new drains , making good to pipe and retendering, cutting out existing benching for and forming branch channel (½ round or ¾ section ) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for internal dia of pipe 150mm, complete all as specified and directed.

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete

Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site all as specified and as directed by the Engineer in charge.

Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed.

Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and directed.

All as per item No 137 above but for one fan point controlled by one piano switch all as specified and as directed.

All as per item No 137 above but for one light point controlled by two way switch all as specified and as directed.

All as per item no-137 above but for one bell point controled by one bell push all as specified and as directed.

All as per ser item No. 137 hereinbefore but for one 3 pin socket outlet 5 Amp Same board.

All as per ser item No 137 hereinbefore but for one 3 pin socket outlet 5 Amp independent.

All as per Item no 137 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type switch, two way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

Supply and fixing of Ceiling rose surface bakelite three terminals 240 volts complete, all as specified.

Supply and fixing Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , complete all as specified and directed.

S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installation complete all as specified and directed.

Supply and fixing of Bell push flush type piano 5 Amp complete, complete all as specified and directed.

Supply and fixing Bell multi music 230 volt ,AC single pole complete all as specified and directed.

Supply and fixing of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Supply and fixing factory made epoxy powder coated Distribution board VTPN 6 ways ,415 Volts with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one MCCB as incommer and SP MCBs outgoing complete all as specified and confirming to IS : 8623 complete all as specified and directed.

Supply and fixing factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623 complete all as specified and directed.

Supply and fix in replacement MCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified and directed.

Supply and fix in replacement of MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all specified.

S&F in repair MCCB 415 Volt 25 KA 4 Pole 125 Amps all as specified and directed.

S&F single core PVC insulated unsheathed multistanded copper conductor cable 1 Sqmm , 1100 Volts ISI marked drawn through existing point wiring complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testing complete all as specified and directed by E-in-Charge.

Supply and fixing LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Taking down electric enerty meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surface complete all as specified and directed.

Taking down Geyser any cap/type including disconnection electrically and refixing at same or new location with and including 2 Nos PVC connection for inlet/outlet pipe, thermostate & indicator lamp as required at site as specified and directed by the engr-in-charge.

Taking down ceiling fan of any type including discoonnection electrically as specified and directed and deposited to MES store yard all as specified and directed.

Supply and fixing ceiling fan BEE 5 star(BLDC) rated super energy efficient electric driven ceiling fan with double ball bearing 1200mm (48 inch) sweep,copper wound stator ( with brushless direct current motor) having three blades made of aluminium alloy suitable for operation on single phase 140-285 Volts, AC ,50Hz , with power factor not less than 0.99,service value minimum 8 Cu.metre / Min/Watt or higher ,air delivery minimum 230 cubic metre per minute or more ,power consumption maximum 28 watts or lower , top speed minimum 350 (+/-) 10% RPM or higher, speed control by 5 step regulator with copper winding complete as per IS:374-1979 or latest IE rule complete all as specified and directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm , connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.complete all as specified and directed.

M&L for cutting of suitable size of holes for 300 mm exhaust fan in wall and grouting of nuts and bolts in wall and making good to match with existing walls all as specified and directed by Engr-in-Charge.

Supplying and laying of CPVC pipes of dia 50 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc complete all as specified and directed.

Supplying and laying of CPVC pipes of dia 25 mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete fittings like socket, union, bend, elbow, tees etc all as specified. And directed.

S&F 50 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe and fixed complete all as specified and directed.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe and fixed complete all as specified and directed.

Cutting existing 80/100/150 mm GI pipe and inserting GI Tee of size 100x100x50 mm for tapping including necessary earth work and making flange for connection of new 50 mm of GI pipe including all as specified and directed by Engr-in-Charge.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed.

Supply and fixing fully diffused recessed mounted luminaire 2'x2' LED 36Watt suitable for POP/Gypsum false ceiling complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Dismentaling and taking out old U/S XLPE 1100 Volts grade of size 35 sqmm 35 sqmm 3.5 core by disconnection of Elect Supply, complete all as specified and directed.

Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wore armored electricl power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core, including glands, lugs, nut, bolts, washeres as required at site, testing complete all as specified and directed.

Excavation in trenches not exceeding 1.5 meters wide and not exceeding 1.5 meters in depth and getting out in any type of soil complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25 cm each layer all as specified and directed.

Removing excavated material not exceeding 50 M and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.

Sand cushioning to underground cables provided with a layer of sand 8 cm thick before laying the cable in trenches and 15 cm thick after laying the cable in trenches complete all as specified.

S & F Steel pipe glavanised grade of 40 mm core laid in trenches or under ground/ floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete all as specified and directed.

M& L for Sub Class 'B' bricks for covering to cable laid dry flat, with width equal to the length of brick all as specified and directed.

Hare krishna engineering const. (BID ID -3491452)

JK BUILDERS AND DEVELOPERS (BID ID -3489586)