REPAIR AND REPLACEMENT OF STREET LIGHTS WITH LED STREET LIGHTS AT LGJ MIL STN

Amount

Checking of street light fittings any type like CFL , MV lamp fitting, SV lamp fitting, metal halide fitting, focous/flood light, high mast light, LED lights etc. fixed on pole/wall to find out defects/taking out unserviceable parts such as LED Driver, SPD, lamp holder / bipin holder etc. and repairing by changing the defective part(s) including minor repair to cable connection / loose connection/necessary cleaning the bowl/perpex cover where provided and testing complete all as specified and as directed by Engineer-in-charge. Note :- (i) Parts such as lamp/ porcelain lamp holder / bipin holder, LED driver/new LEDc lights etc. shall be measured and paid separately under appropriate item of this BOQ as supply only. (ii) The T & P, ladder and vehicles etc. will be arranged by the contractor and the cost deemed to be included in the quoted rates.

S&F in replacement Integral LED street light luminaire white light comprising of epoxy powder coated housing, enclosed with glass cover in frame 45 W not less than 100 lumens per watt AC 230 Volt supply (white Glass) suitable for 40/50 mm OD entry for direct mounting on pipe bracket with all electrical accessories wired up to the terminal block suitable for mounted on bracket / poles / walls complete all as specified and directed by the Engr-in-Charge. Make : Havells Cat pt No ENDURAPERLNEOSL45WLED757SASYTOPC or equivalent model of Bajaj/ Polycabj/Hevels/CG

S&F in replacement crown shaped post top lantern in soothing opal finish made up policarbonate, suitable upto 1 x 20 watt LED lamp (B-22 ) direct mounting on pipe bracket with all electrical accessories wired up to the terminal block suitable for mounted on bracket / poles / walls complete all as specified and directed by the Engr-in-Charge. Make : HAVELLS Cat Part No LHDC10115099 or equivalent model of Bajaj/ Polycab/CG.

S&F in replacement LED flood light luminaire white light comprising of epoxy powder coated housing, enclosed with glass cover in frame 120 W not less than 100 lumens per watt AC 230 Volt supply (white Glass) suitable for fixing / mounting on brackets with all electrical accessories wired up to the terminal block suitable for mounted on bracket / poles / walls complete all as specified and directed by the Engr-in-Charge. Make : Havells JETAIRISFLS120WLED757SYMLTG or equivalent model of Bajaj/ Polycab/CG Note : Flood lights to be replaced at high mast of any hight including servicing and replacement of work out wires of required at site. Cost inclusive of taking down high mast and taking up after necessary repair/replacement.

S&F in replacement of 1100 volts grade heavy duty single core, FRLS cable PVC insulated sheathed copper wire srands of size 1.5 Sqmm for connection purpose complete all as specified and directed by the Engr-in-Charge. Make : Plaza, Finolex, Kalinga.

S&F in replacement brackets made out of GI tubing light grade 40mm dia, 1.5 metre long bent to shape at 120 degree angle at half metre from bottom (as per sample), fixing on poles/walls for street light fitting including before fixing applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. Note :- Clamps and nut bolts for fixing as required shall be measured and paid separately under appropriate item.

Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m deep getting out in soft/loose soil for foundation/ cable etc n exc 10 Sqm on plan and n exc 1.5 Sqm in depth complete all as specified and directed by Engr-in-Charge

Returning, filling in including spreading levelling, watering and well ramming in layer n. exc 25 cm thick complete all as specified and directed by Engr-in-Charge

Removing surplus soil to a distance n. exc 50 m and depositing where directed at level n. exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge

M&L sand cushioning with dry coarse sand to under ground cable 230 mm deep (80 mm below and 150 mm above the cable) complete all as specified and directed by Engr-in-Charge.

Supply only bricks sub class 'B' for protection of the cable complete all as specified and directed by Engr-in-Charge

Supply, laying, jointing and testing in trenches on poles walls XLPE insulated armoured heavy duty electric cable with alluminium counductor 1100 volt grade of cross sectional 6 sqmm x 2 core including taking down old u/s one complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing in trenches on poles walls XLPE insulated armoured heavy duty electric cable with alluminium counductor 1100 volt grade of cross sectional 16sqmm x 4 core including taking down old u/s one complete all as specified and directed by Engr-in-Charge.

S&F in replacement LT cable junction box, dust and water proof (IP65), out door type, made out of Polycarbonate with glass fiber re-inforced, size of box 140 x 140 x 95 mm with swiveling cover and locking clamp, pole mounting, consisting of aluminium bus bar strip 4 Nos mounted on PVC insulator and provision of incoming/outgoing cables with grommets, including in built 2 to 2.5 Amp MCB, SP, 9/10KA one No complete all as specified and as directed by Engineer-in-charge. Make :- Cat part GS-JB-1414 of Syntex or Hensel or equivalent in Sagar Frp Industries Gurgaon Note :- (i) MS clamps and nut bolts for fixing the box along pole shall be measured & paid separately under appropriate item of this Schedule.

S&F MS clamps made out of MS flat iron of any size as required for fixing street light fitting and main switches, junction boxes etc. including nut, bolts, washers etc. as required and before fixing applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

M & L for GI pipe light grade laid in trenches / fixed to pole / wall for cable protection of following size 40 mm complete all as specified and directed by Engr-in-Charge

supply only in repair LED driver suitable for 45 Watt 230 Volt AC Supply LED fitting complete all as specified and directed by Engr-in-Charge

Supply only in repair LED driver suitable for 60 Watt 30 Volt AC Supply LED fitting complete all as specified and as directed.

S & F in repair MCB SP 6 to 32 Amp, 240 Volts, rupturing capacity 9 KA confirm to IS- 8828-1996, IEC - 60898 complete all as specified and directed by Engr-in-charge. Make : Legrand / standared/ Indo Asian.

Supply only in replacement lamp LED, 9 Watt, 230 vatt of any capacity complete all as specified and as directed by Engineer -in- charge

Supply only in replacement of Surge protection device for LED fitting 5 KV compatible with industrial & out door LED fixtures with rated power above 75 W upto 150 W complete all as specified and as directed by Engineer -in- charge Make : Cat Part No SRPS-HP-5K-440 of Crompton or equalent of Havells/Bajaj

Labour for checking and fault finding of defective LT cable underground any specification and size by trench excavation, jointing and reconnecting with suitable jointing and insulating material at same location (50 RM each Job ) complete all as specified and directed by Engineer-in-Charge Note: Excavation, refilling shall be paid seperately and old bricks, sand shall be reused during refilling

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

Singla Electricals

Lalgarhia Enterprises