PROVN OF ESSENTIAL OTM ACCN AND TECH STORES FOR MILITARY STATION BARABANKI

Amount

Sch 'A' Part-I (Buildings Work) Note : This schedule is pre-priced by MES and the pre-priced rate indicated are under Col. 5.

Total amount of Sch 'A' Part II (Site clearance, excavation and earth work)

Total amount of Sch 'A' Part III (Internal Water Supply )

Total amount of Sch 'A' Part IV (Internal Electrification)

Total amount of Sch 'A' Part V (Sewage Disposal)

Total amount of Sch 'A' Part VI (Road, Path & Culvert )

Total amount of Sch 'A' Part VII (Area Drainage)

Total amount of Sch 'A' Part VIII (External Water Supply )

Total amount of Sch 'A' Part IX (External Electrification )

Total amount of Sch 'A' Part X (Refrigerator, Water Cooler & Desert Cooler)

Total amount of Sch 'A' Part XI (Solar Water Heater )

Total amount of Sch 'A' Part XII (Conduit for Telephone and Television)

Total amount of Sch 'A' Part XIII (Dimolition/Dismantling)

Sch 'A' Part XIV (Provisional sum) of Rs 682898.61 for :- (i) Provn of RCC Culvert 9.00 mtr long with 1500 mm Span complete all as specified and directed.(01 Nos) (ii) Septic tank for 100 users designed to carry sewage and sullage water, excavation in any type of soil , PCC 1:4:8 type D-2 below foundation, RCC M-30 design Mix in walls, base slab, Baffle walls and roof slab including beam etc with vent shaft, manhole opening with cover connection etc, complete with effective depth of 1.5 m and over all depth of 3 m complete all as shown in Drg No TD/750, Sheet 1/2 & 2/2 - (01 No). (iii) Provn of Soak well 2.40 meter dia and 4.50 meter effective depth with and including excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed masonary with top ring M-25 design mix concrete including interceptings chamber and screen chamber made of brick masonary in CM 1:4 ,RCC cover slab of M-25 concrete / SFRC cover and interconnecting pipe of RCC /DWC complete all as shown in Drg No TD/576, Sheet 1/2 & 2/2 - (02 No).

Sch 'A' Part - XV (Miscellaneous Items) Note - This Schedule is not pre-priced by MES and the pre - priced rate indicated as "Rs 0.00 under col.5 siginifies this fact only.

INTERNAL WATER SUPPLY S& F health fauceny (1.5 m tube) with hook (hand spray) with CP body complete all as specified and directed.

S& F Angle valve,cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe 15 mm bore complete all as specified and directed.

INTERNAL ELECTRIFICATION Dismantling and taking out old U/S copper / aluminium point wiring (light, fan, socket or power) complete including switch socket, ceiling rose and regulator etc for taking credit (Note: Ceiling fan/Exhaust fan/gyser etc witll be deposited in MES yard)

Dismantling and taking out old U/S copper / aluminium submain wiring of various size complete all as specified and directed.

Dismantling and taking out old U/S tubelight fitting of any type / discriprition complete all as specified and directed.

Dismantling and taking out old U/S holder of any type complete all as specified and directed.

Dismantling and taking out old U/s switch socket 6 Amp complete all as specified and directed.

Dismantling and taking out old U/s switch socket 15 Amp complete all as specified and directed.

Dismantling and taking out old U/s ceiling rose complete all as specified and directed.

Dismantling and taking out old U/s fan regulator complete all as specified and directed.

Dismantling and taking out old U/S MCB DB with MCB / Main switch complete all as specified and directed.

M&L for Point wiring complete for One light/Fan/Exhaust Fan point controlled by one switch with PVC insualted and unsheathed FRLS cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Point wiring complete for One light point controlled by two way switches with PVC insualted and unsheathed FRLS cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Point wiring complete for one 5 Pin 5 Amp switch Socket outlet point on an independent board, with PVC insualted and unsheathed FRLS CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall / roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost..

M&L for Point wiring complete for one 5 Pin 5 Amp switch Socket outlet point on same board, with PVC insualted and unsheathed FRLS CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and MS conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :-In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Point wiring complete one 5 pin 05/15 Amps switch socket out let on an independent board with PVC insulated and unsheathed, FRLS cable 2.5 sqmm (nominal area) ,ISI marked, multi-stranded copper conductor single core including ISI marked 20mm dia PVC conduit medium grade concealed in wall and MS conduit in roof/floorslab excluding flush metal GI boxes complete,including 2.5 Sqmm,FRLS cable PVC insulated unsheathed copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories and all as specified Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

Supply and fixing Switch flush type 5/6 Amps single pole two way complete all as specified and dierected..

Supply and fixing LED batten Tube light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 FT 20 W), luminaire lumen >2000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed

S&F LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 feet 9 W) luminaire lumen >1000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed.

S&F LED Building security light fitting with aluminum pressure die cast housing, high purity PC Fresnel diffuser with silicon gasket for IP-65 protection, power consumption <20 W (24W) & luminaire lumen >2500 lm and system efficiency > 120 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers complete all as specified and directed.

S&F round shape 12 watt 220 volts AC recessd type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Mirror light Decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate body with Minimum 8 Watt & Maximum 11 Watt LED warm white in colour with a luminous efficacy of 120 lum/watt(min) with PF not less than 0.9 with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed.

Supply and fixing fullglow and fully diffused recessed mounted 2'x2' LED luminaire with high transmitive diffuser suitable for indoor spaces complete all as specifed and directed. Make : Phipips cat part No RC380B LED36S-6500 G4L60 W60 PSD OD/Crompton Cat part No. ICTRF7-36-WW/ Havells cat part No LHFHDNE1TN1G020 .

Supply and fix bed side LED light 3 W recessed/wall mounted LED min 120 lum/watts washers, tilted 70 degrees to offer the best lamination on the wall wall/floor/retailer displays all as specified and directed. Make : Philips 48042 3 Watts LED bed side light or equivalent model of make mentioned in Appendix ‘D’

Supply and fixing Ceiling fan 1200 mm sweep single phase 230V AC, ISI marked alongwith steel down rod and connecting up the fan to ceiling rose including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to ceiling fan motor not less than 0.5 mtr long with PVC connector 2 way/3 way for connection complete all as specified. Make Bajaj model Electra 50 or technocommercially equivalent in Philips/Crompton.

Supply and fixing Ceiling fan 1400 mm sweep single phase 230V AC, ISI marked alongwith steel down rod and connecting up the fan to ceiling rose including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to ceiling fan motor not less than 0.5 mtr long with PVC connector 2 way/3 way for connection complete all as specified.. Make Bajaj or technocommercially equivalent in Philips/Crompton.

Supply and fixing Exhaust Fan high quality engineering plastic, resistant to colour change with anti- statio properties (ventil air) 200 mm sweep 35 watt ,1200 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side(outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to exhaust fan motor complete all as specified and directed. Make- Usha/Baja/havells/CG.

Supply and fixing Exhaust Fan high quality mettalic body, resistant to colour change 300 mm sweep ,900 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side(outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit pipe from celling rose to exhaust fan motor complete all as specified and directed. Make- Bajaj model no Supreme Dlx /havells/CG

Supply and fixing Exhaust Fan high quality mettalic body, resistant to colour change 450 mm sweep ,900 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side(outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit pipe from celling rose to exhaust fan motor complete all as specified and directed. Make- Bajaj model no Supreme Dlx /havells/CG

MCCB 4 pole ,415 V ,AC fixed type 125 amps with breaking capacity 10 KA complete all as specified and directed.

MCCB 4 pole ,415 V , AC fixed type 63 amps with breaking capacity 10 KA complete all as specified and directed.

MCCB VTPN DB double door type, 415 Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed. Note: MCCB shall be measured and paid seprately under respective item.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 8 way ISI marked all as specified and directed

Submain wiring with two single core 2.5 sqmm FRLS copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 2.5 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connection to earth dolly complete all as specified. Note:- (i) Two single core 2.5 sqmm copper conductor, one run PVC conduit and one run of 2.5 sqmm earth wire shall be considered & measured as one unit. (ii) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

Submain wiring with two single core 4 sqmm FRLS copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 4 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note:- (i) Two single core 4 sqmm copper conductor, one run PVC conduit and one run of 4 sqmm earth wire shall be considered & measured as one unit. (ii) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

Submain wiring with two single core 6 sqmm FRLS copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wall surface / ceiling for sub main connection including 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified. Note:- (i) Two single core 6 sqmm copper conductor, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit. (ii) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x6 mm thick buried directly in ground (earth pit not less than 2.5 M below normal ground level ) with top edge of the plate not less than 1.75 M below normal ground level connected to and including galvanized steel wire 4mm dia as earth lead Earth plate to pole test point including 25mm GI light grade pipe for earth protection from earth point to earth plate surrounded by 150mm thick alternate layers of charcoal dust mix all with 35% common salt, 20mm bore medium grade GI Pipe for watering PCC pit type 1:3:6 type C-1 using 20mm graded stone aggregate, with RCC 50mm thick cover in 1:2:4 Type B-1 reinforced with 8mm dia TMT bars @ 8mm c/c both way. GI check nut, funnel with wire mesh necessary excavation and earth work in any type of soil all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 complete all as specified and directed.

SEWAGE DISPOSAL Supplying and laying of 150 mm internal diameter DWC pipe Class –SN8 Structured wall polyethylene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and smooth internal surface ( Double wall) for non – pressure underground Sewerage & Drainage application confirming to IS: 16098 : 2013 including all materials, labours & T&P required for proper completion of work complete all as specified and directed.

EXTERNAL WATER SUPPLY Construction of brick masonary valve pit chamber of size 900mm x 900 mm x 900mm (internal dimensions ) including necessary excavation and earth work, PCC work in the foundation and top of the wall, plaster on internal surfacess with CM 1:4 cement mortar, Mild steel cover 6 mm thick and angle iron 40mmx40mmx6mm frame , locking arrangements with lock and key /pad lock brass 4 levers with key in duplicate), duly painting the steel surfacess with two coat of synthetic enamel paint over on coat of Red oxide primer complete all as specified shown on drawing and as directed.

Construction of brick masonary valve pit chamber of size 1050mmx1050 mm x1050mm (internal dimensions ) including necessary excavation and earth work, PCC work in the foundation and top of the wall, plaster on internal surfacess with CM 1:4 cement mortar, Mild steel cover 6 mm thick and angle iron 40mmx40mmx6mm frame , locking arrangements with lock and key /pad lock brass 4 levers with key in duplicate), duly painting the steel surfacess with two coat of synthetic enamel paint over on coat of Red oxide primer complete all as specified shown on drawing and as directed.

Taking up/Dismantling of CI/GI pipe line including valves of 100/80 mm dia including necessary earth work in any type of soil complete all as specified and directed.

Taking up/Dismantling of GI pipe line including valves of 50/40 mm dia including necessary earth work in any type of soil complete all as specified and directed.

Taking up/Dismantling of GI pipe line including valves of 25/20 mm dia including necessary earth work in any type of soil complete all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 6 Sqmm 2 core complete all as specified and directed.

Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 10 Sqmm 4 core complete all as specified and directed.

Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 25 Sqmm 4 core complete all as specified and directed.

Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 35 Sqmm 3.5 core complete all as specified and directed.

Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 150 Sqmm 3.5 core complete all as specified and directed.

Supply, laying, jointing and commissioning of LT UG cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor through pipe/road crossing in ducts, on poles, trenches etc of size 185 Sqmm 3.5 core complete all as specified and directed.

Supply & fixing Integral LED street light luminaire 70/75 watt , comprising of PDC housing , enclosed with toughened glass cover suitable for & including 50mm OD GI pipe not less than 1.2 mtr long bent to shape bracket , Ingress protection 66. Make : Philips cat part No BRP409 LED CW 036 MR FG S1 PSU GR and equivalent in CG/Havells.

Supply & fixing polycarbonate junction box of size 250x200x150 mm with 01 No MCB SP 6 Amp,02 nos aluminium bus bar of size 25 mm x 3 mm for cable in/out fixed on porcelain support with hinged cover and locking arangement fixed to pole complete all as specified and directed.

Supply and fixing of Smart Bright all –in-one solar street light 20/21 watt range upto 12000 lumen with lithium phosphate battery capacity 12 V 35/36 AH, polycrystalline solar panel of capacity min 50WP and MPPT charge controller, module mounting structure and tubular pole including earth work and labour for masonry work complete all as specified and directed. Make : Philips Cat Part No. 21W Solar LED street lighting system HSN Code 94055040/Surya Cat part No. SSLE T10 20W D LFP WP SOLAT/Compton Cat Part No. CSADSMP20 CDL NC or equivalent model of make mentioned in Appendix ‘D’

Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm thick by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4), type B1 using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 3 mm thick duly painted with two coats of synthetic enamel paint with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering, 15 mm dia light grade GI pipe for lead protection in and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No. 3 connected to earthing test point all as specified and indicated including testing on completion as directed. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Supply, erecting and installation of steel tubular, swaged, pole of overall length 8.5 meter having maximum tensile strength 42 Kgf/mm2 of type 410 SP-22 conforming to IS-2713-1980 for fixing street light. A through hole of 14 mm dia shall be provided at height of 2.5 mtr from base plate for inserting 2 core cable from junction box to top of the pole and top portion shall be fabricated for fixing street light fittings including earth work complete with cast iron base plate, having suitable dia of hole through the pole with nuts & bolts for earthing arrangement, bottom portion of tubular steel pole having 165.10 mm outer dia in 5 meter length, 4.5 mm wall thickness, middle portion having 139.70 mm outer dia in 2 metre length 4.5 mm wall thickness and top portion having 114.30 mm outer dia in 2 meter length, 3.65 mm wall thickness of pole wall, respectively, bottom MS square plate duly painted with two coat of black bituminous paint throughout, internally and externally up to planting depth and painting remaining portion of pole with two coats of aluminium paint to the entire exposed surfaces over one coat of red oxide primer making / pasting three nos circular strips each of 100 mm wide with one yellow and 02 Nos black colour strip synthetic enamel paint and marking / stencil writing of pole numbers with black paint complete all as specified & directed. Note :- The following are included in quoted rates :- (a) Excavation in post holes in any types of soil, returning filling, well raming and dispasal of surplus soil to a distance not exceeding 50 mtr from the starting points. (b) PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation including form work complete. (c) PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including form work complete. (d) PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in base.(e) Painting of poles with one coat of red oxide primer and two coat of aluminium paint before fixing and one coat of aluminium paint after fixing complete, embedded portion shall be painted with two coat of black bituminous paint all as specified.

Boring of holes under road, pavement , hard standing by trenchless technology using ultra sounding technique and necessary machine 100 mm dia complete all as specified and directed.

Aluminium bus bar, 3 Nos for phase (R,Y,B) of rating 300 Amp and 01 for neutral raiting 200 Amp mounted on heavy duty rubberised/porcelain support -04 Nos .

INCOMING: MCCB 100 Amp, 4 Pole, 50 Hz, 415 V with rupturing capacity 25 KA adjustable thermal setting type -01 no

OUTGOING : MCCB 12 to 63 Amp, 4 Pole, 50 Hz, 415 V with rupturing capacity 25 KA- (04+1) No

MCB TP 20 Amp, 50 Hz, 415 V with rupturing capacity 10 KA adjustable thermal setting type- (02+1) Nos

RYB LED indicating lamp -01 Set (set of three)

Timer switchs astro type 415 volt three phase 20 amp rating with contactor fitted inside steel with enclosure

Wiring of panel complete all as specified and directed.

Disconnecting & Taking out LT UG cable 1100 volts of any size including earth work in any type of soil complete all as specified and directed.

Relaying LT UG cable 1100 volts of any size complete all as specified and directed. Note: Excavation, earth work, sand cushioning and PCC cover should be measured and paid under respective items of schedule.

REFRIGERATOR, WATER COOLER & DESERT COOLER Supply and installation of metallic body desert cooler electric driven (single phase) having nominal air flow of capacity 4000 cum/hour, including water pipe connection with PVC pipe connection having brass coupling nuts at both ends, PVC float valve, angle iron stand of size 40x40x6mm with suitable size of wheels, electric plug connection with and including plug top 5 Amp complete all as specified. Make of body : Bajaj/Crompton/Champion. Make of sheet- Jindal/Tata

Supply and Fixing Refrigerator of capacity more than 220-230 liters electric driven, single phase 230 volts, AC 50 Hz 5 star rated including plug top 15 Amps and necessary electric connection complete all as specified and directed.

Supply and installation of Voltage stabilizer of capacity 3 KVA for automatic operation single phase naturally air cooled indoor type & designed for input voltage between 170 volts to 250 Volts with out put voltage stablized at 230 Volts with accuracy of + 2.5 % complete all as specified and directed.

Supply and installation of Voltage stabilizer of capacity 4.00 KVA for automatic operation single phase naturally air cooled indoor type & designed for input voltage between 170 volts to 250 Volts with out put voltage stablized at 230 Volts with accuracy of + 2.5 % complete all as specified and directed.

B.K.ASSOCIATES

SAHU ASSOCIATES

SHRIPATI INFRASTRUCTURES PVT LTD