Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAccepted-Finance | L1 | Accepted-Finance BOQ found in order and the bidder is 1st lowest as per comparative statement of BOQ. | |
| 2 | L2₹4.4 L+₹5,584 (1.28%)Accepted-Finance | L2 | Accepted-Finance BOQ found in order and the bidder is 2nd lowest as per comparative statement of BOQ. |
Tender Value
₹4.2 L
EMD Value
₹8,440
Closing Date
9 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER(CIVIL)
The Executive Engineer (Civil), BSNL Civil Division, Jamshedpur at Dhanbad, 2nd floor, CTO building, Hirapur, Dhanbad-826001
Special repair and maintenance for structural safety of OFC station building in Microwave campus, sector -02 at Bokaro (Dhanbad BA) (External and Internal)
2023_BSNL_143276_1
14/NIT/EE(C)/CDJ/2022-23
Open Tender
Civil Works
Item Rate
60 days
Sector-2, Bokaro
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts officer (Cash), O/o GMTD, BSNL, Dhanbad
₹8,440
15 Feb 2023
30 Jan 2023
13 Feb 2023
30 Jan 2023
9 Feb 2023
30 Jan 2023
Amount
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
a) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form for :
a) Weather shade, Chajjas, corbels etc., including edges
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
a) Fixed to steel windows by welding.
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.
a) 250 mm weighing not less than 150 gms.
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :
a) 100x60x2.50 mm
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
a) Twin rubber stopper
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge.
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.
a) 30 mm thick plain PVC door shutters.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
a) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :
a) 4.0 mm thick glass panes.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
a) 40 mm thick with 20 mm nominal size stone aggregate
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
a) 18 mm thick.
Providing and fixing glass strips in joints of terrazzo/ cement concrete floors.
a) 40 mm wide and 4 mm thick.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
a) Size of Tile 600x600 mm
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.
a) 110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.
a) Single tee with door i) 110x110x110 mm
b) Bend 87.5° i) 110 mm bend
12 mm cement plaster of mix :
1:6 (1 cement: 6 fine sand)
12 mm cement plaster finished with a floating coat of neat cement of mix :
1:4 (1 cement: 4 fine sand)
6 mm cement plaster of mix :
1:3 (1 cement: 3 fine sand)
Neat cement punning
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
a) With cement mortar 1:4 (1cement: 4 fine sand)
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
a) Float glass panes of thickness 4 mm.
Renewal of old putty of glass panes (length) .
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..
a) In cement mortar
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
a) Of area 3 sq. metres and below
Providing and fixing bamboo scaffolding system on the exterior side, up to four story height with staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter :
Making chases for crack repair up to 100x100X75mm in walls including making good and finishing with matching surface after casting RCC etc.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
a) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
a) With float glass panes of 5.00 mm thickness
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
a) 50mm average thickness
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
a) Bars up to 12 mm diameter
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.
a) SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
Reparing of damage RCC walls, columns, pillars,pilasters, string courses, beams, Suspended floors, roofs,landings, Shelves,Chajjas,Lintels, balconies, window sill, Stair cases.vertical and horizontal fins individually or forming box louvers, facias and eaves boards etc.upto floor five level i/c cost of Centering Shuttering with Cement concrete 1:1:2 (1 Cement : 1 Coarse sand : 2 Stone aggregate 12.5 mm to 6 mm nomoial size) and top finishing with 6mm Cement plaster 1:3 (1 Cement : 3 Fine sand) excluding the cost of scaffolding as per direction & satisfaction of E-in-C.
a) 50 mm average thickness of repairing
Cleaning of terrace roof of the building i/c mumty roof ,clearing the chokage etc. at khurras/inlet of rain water pipes, clearing small plants, rank vegetation etc. all complete including disposal of rubbish to out side of the campus as per direction of Engineer-in-charge
Removing tree on wall/roof i/c Jhula, scaffolding and cutting the tree, providing chemical/acid etc to desolve so as to prevent future regeneration, all complete as per direction of Engineer-in-charge.(Repairing of damage portion in wall & roof due to removal of tree to be paid in basic item)
Removing & refixing Aluminium door shutter with frame for smooth operation including taking out door with frame, dismembering aluminium door sections, taking out panelling, reassembling the door shutter with aluminium cleats with screws, rivets, rubber gasket & refixing the available panelling in position with snap beading & fixing the shutter in position with necessary stainless steel hinges with rivets or pivots with necessary screws etc complete as directed by the Engineer In charge.
P/F antistatic homogeneous composition with especialy carbon black conductive layer PVC sheet manufactured as per IS 3462-1986 in flooring in approved patterns on smooth and damp proof base using rubber based adhesive of approved quality and manufacture like Dunlop S-758,Fevicol SR-998 or equivalent iincluding rolling with light wooden roller weight about 5 kg all as per direction of Engineer in charge: 2mm thick sheet.
Providing and fixing copper flat strips 25 X 0.5 mm under antistatic flooring i/c coper screws all complete as per direction of the Engineer in charge.
Re-fixing available dismantled PVC sheet tiles after properly cleaning of its adhesive by kerosene oil or by other means in existing chipped out PVC tile flooring in existing patterns on smooth and damp proof base using rubber based adhesive of approved quality and manufacture like Dunlop S-758,Fevicol SR-998 or equivalent iincluding rolling with light wooden roller weight about 5 kg. all as per direction of Engineer in charge: PVC sheet tile 30X30 cm size.
Providing and fixing inter locks (best make of approved quality) for doors including necessary cutting and making good etc. complete.
Providing asbestos cement 6 mm thick corrugated sheets roofing and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers complete excluding the cost of purlins, rafters and trusses: corrugated sheets
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
a) Two or more coats on new work.
White washing with lime to give an even shade :
a) Old work (Two or more coats) .
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work :
a) 100 mm diameter pipes .
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
a) One or more coats on old work.
Distempering with 1st quality acrylic washable distemper (ready made) having VOC content less than 50 gm per ltr.of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.
a) One or more coats on old work.
Finishing walls with Acrylic Smooth exterior paint of required shade :
a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).
Deduction for using scaffolding
a) Repairs to plaster of thickness 12 mm to 20 mm in patches
b) 12 mm cement plaster
c) Applying bonding coat.
RANJEET RAJ
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .