Repair and Renovation of Interpretation Centre and construction of one additional room at 1st floor at Mahamaya, Jammu

Amount

Excavation work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 M including the disposal of excavated earth upto 1 M from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil 80% with 20% ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size) Crushed incl. all carriages lifts complete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Crushed Crushed incl. all carriages lifts complete job.

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) incl. all carriages lifts complete job.

Extra for half Brick masonry in superstructure above plinth level upto floor V level. incl. all carriages lifts complete job.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) Crushed incl. all carriages lifts complete job.

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) Crushed incl. all carriages lifts complete job.

Extra for brick work in Square or rectangular pillars incl. all carriages lifts complete job.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) Crushed incl. all carriages lifts complete job.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredIn gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately.) Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns) of approved Jindal Brand

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminium (minimum thickness of powder coated 50 microns) of approved Jindal Brand

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.)With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg/sqm)

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Wall Painting with plastic emulsion paint of approved lj brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/1 Osqm over and including base Coat of water proofing cement paint applied @ 2.20kg/10sqm

Providing and Fixing Poly Carbonate Sheet to be pais as per actual.

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.completeHot finished welded type tubes to be pais as per actual.

Kota stone slab 25mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing and fixing Stainless stell railing/steps ornamental type of superior brand 900mm height

Providing and fixing Service Line(Aluminium 10 sqm)

Iron D Box of standrad make , 18 way.

MCB 6-32 Amp.

5 Pin Sockets points including switch

Provision of electric Point (1.5mm sq,wire)

Light circuit with 2.5mm sq,wire

CFL/LED saver 18 watt of approved quality.

Providing,Installation,testing and commissioning of cieling fan . Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers.

Providing,Installation,testing and commissioning of Exhaust 450 mm dia. Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers.

Anil Razdan

CHARAN DASS