SPECIAL REPAIR TO BLDG NO T-07 ORD, EXPL AND RATION STORES OF MH JHANSI UNDER GE JHANSI

Amount

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide for foundation exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for old size brick work with fly ash bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking of shutter from frame) area n.exc 1.50 sqm complete all as specified and directed.

Taking down chowkhat or frame exc 1.5 sqm but not exc 4.00 sqm with shutter (without taking off shutter from frame) complete all as specified and directed.

S&F Box type steel windows with 80x40x1.25mm CRCA sheet frame with side hung shutters (double shutters for glass and gauze) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C as per TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed. Note:-Rate for glass and gauge(wire mesh) are not included in the same item and the same shall be measured and paid separatly

Supply only 3mm thick sheet glass ordinary quality glazing with oil putty or wooden beads in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks , galvanized wire staples complete all as specified and directed.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plate, rails, braces etc and fixed complete conforming to Gde Fe 290(Gde-E-165) complete all as specified and directed.

S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. Make : Rajshree / Sintex / Greenlam

S&F 100 mm butt hinges medium weight cold rolled mixed steel complete all as specified and directed.

S&F 200mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm aluminium anodised handles cast type complete all as specified and directed. .

S&F mild steel sliding door bolts 300mm plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound as per manufacturer instruction and finished fair and even complete all as specified and as directed. Note: Rate for water proofing compound will be included in this item.

M&L 75 mm thick plain cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path, finished even and smooth (without using extra cement), laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

Dismantling of ceiling boards any thickness including cover fillet complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of main T runner 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 4mm dia GI rod from roof / Slab incl wall/perimeter runner/channel of 15 mm size with interlocking arrangement, as required, for framing grid of suitable module size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed. Make : Gyproc / V-Board / Everest

Dismantling of asbestos cement corrugated/semi corrugated sheet in roof covering complete all as specified and directed.

S&F for Pre-painted galvalume aluminium Zinc coating GI based corrugated double ribbed trapezoidal profile steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., quality confirming to GDE Fe 410-S complete all as specified and directed.

Demolition of cement concrete (reinforced) not exc 15cm thickness in shelves, chajjas and similar suspended work (other than ground floor) complete all as specified and directed.

M & L for reinforced cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in Shelves,Chajja and similar suspended work complete all as specified and directed. Note:-Rate for form work to sides and soffits and reinforcement are not included in the same item and shall be measured and paid separatly .

S&F MS TMT bars 10 mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

All as per item No 31 but 5 mm dia and over upto and including 10 mm dia in stirrups, spacer and binders complete all as specified and directed.

M&L for Use and waste form work to sides and soffits of shelves, Chajja and similar work complete all as specified and as directed.

M&L for preparation of new plaster surfaces, and applying two coat distember oil emulsion over a coat of primer including a thin layer of wall care putty on walls complete all as specified and directed.

M&L for complete removel of exist treatment of old surfaces and applying two coat distember oil emulsion over a coat of primer including a thin layer of wall care putty on walls complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying two coat cement base paint on walls complete all as specified and directed.

M&L for complete removal of exisiting treatment, washing and rubbing of old surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for chequered coloured cement concrete tiles 300mmx300mmx22mm thick, machine pressed (rubber mould type) confirming to IS 13801 ; set jointed and pointed in neat cement slurry in floors laid on 15mm thick in CM (1:6) bedding layers and jointed & pointed with grey cement and pigment complete all as specified and directed.

Dismantling timber scantlings 40 sq cm and over in section in unframed work, in any position complete all as specified and directed..

M&L Machine cut kota stone slab flooring 18-20 mm thick over 15 mm thich cement screed bed in CM 1.6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete all as specified and directed.

M&L kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement mortar backing coat and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete all as specified and directed.

M&L for 25mm thick PCC type B0 1:2:4(using 12.5mm graded aggregate) as in levelling course complete all as specified and directed.

M&L for channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mmof the length indicated) Fe 410 -W (GdeE- 250) Quality A complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of concrete Ceiling surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry and pointed in CM complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), as in sub base, complete all as specified and directed.

Dismantling of Framed timber fillet, rails, post, rafters, purlin etc not exc 40sq cm in section in any position, complete all as specified and directed.

M&L for hardcore (broken stone aggregate) of grading exc 40mm but not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, rolled/rammed to a true surface, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated soil n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed for the following points:- Make For Conduit : -AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

One light point controlled by one switch

One Exhaust fan point controlled by one switch

One ceiling fan controlled by one switch and one regulator .

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

All as per srl item no. 54 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.

M&L for Circuit/submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed . Make: Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI Note: Three run of 6sqmm wire and one run of PVC conduit shall be measured as one unit length

Notes for item No. 54.00 to 56.00 (i) Quoted rate shall deemed to incude the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & caping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing caping may be used in that portion. Make For Conduit : -AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F, Socket, two-in-one, 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed. Make :- Havells(Reo) /Goldmedal /SSK /GM

S&F, Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed. Make :- Havells(Reo) /Goldmedal /SSK /GM

S&F, Socket, 6 pin, 6/16 Amp, multipurpose 240 volts, complete all as specified and directed. Make :- Havells(Reo) /Goldmedal /SSK /GM

S&F, angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed. Make :- Havells(Reo) /Goldmedal /SSK /GM

S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed. Make :- Havells(Reo) /Goldmedal /SSK /GM

S&F 7W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink complete all as specified and directed. Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix LED batten box type with CRCA sheet steel body pre-wired suitable for and including provision of 1x20/22Watt (4 feet) retrofit LED tube with PC body and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed. Make: Havells / Bajaj / Wipro / Philips /Osram

S&F, in replacement of bulk head light fitting including 5W retrofit LED lamp and making all electric connections complete all as specified and directed. Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix LED building security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP 65degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed. Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix electronic fan regulator in 5 steps, 240V, 50Hz complete all as specified and directed. Make: Havells(Reo) /Goldmedal /SSK /GM

Supply and fix MCB distribution board, TPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells

All as per srl item no. 69 here-in-before but SPN 08 way 230 Volt complete all as specified and directed. Make : Indo Asian / L&T / Havells

S& F MCB TPN 63 Amp, 10 KA, 'C' curve, 430 V, 50 Hz complete all as specified and directed. Make : Indo Asian / L&T / Havells

All as per srl item no. 71 here-in-before but SPN 40 Amp 230 Volt complete all as specified and directed. Make : Indo Asian / L&T / Havells

All as per srl item no. 71 here-in-before but 6 to 32 Amp, Single Pole 230 Volt complete all as specified and directed. Make : Indo Asian / L&T / Havells

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 16 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing service cable of any description complete all as specified and directed. Make: Havells /Polycab /Univarsal/Gloster/Asian Cable/RPG

M&L for High density polyethylene pipes (HDPE) 50mm dia of pressure rating 6 kgf/cm2 laid in trenches/floors/duct or fixed on walls /pole for cable protection complete all as specified and directed. Make:- Finolex / Kisan / Prince / Tirupati /Supreme / Jain Irrigation Sys

M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

Taking down ceiling fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades to store for servicing including supply, replacing bearings/bushings, capacitor and terminal connector including capacitor holder suitable for any model of existing fan, Painting of ceiling fans complete, with one coat of synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc and Hanging ceiling fan in its existing or new location and connecting up including provision of 3core flexible copper conductor cable 0.5 sqmm from ceiling rose or connector to fan and testing for satisfactory functioning complete all as specified and directed.

All as per srl item no. 77 here-in-before but of exhaust fan any size up to 450 mm sweep complete all as specified and directed.

M/sDaljeet singh keer

M/s P L Dixit

FTH Traders

M/s SAS Constructions

m/s vijay kumar gupta

m/s ramesh saran agarwal