Constt. of Dispensary near CFC at Rajbagh

Amount

Earthwork in excavation in trenches for foundations [not exceeding1.5m in width] and not exceeding 10sqm on plan including dressing of sides and ramming of bottoms lift up to 1.5m, includind getting out excavated earth as directed (all kinds of soils)

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:5:10(1 cement:5 coarse sand:10 garded stone 40 mm nominal size) incl. c/o carriages.

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:3:6(1 cement:3 coarse sand:6 garded stone 20 mm nominal size ] incl. c/o carriages

Providing and laying in position reinforce cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:1.5:3(1 cement: 1.5coarse sand:3 garded stone 20 mm nominal size ] in column, plinth beams. incl. c/o carriages

Brick work witk common burnt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth inclluding curing in cement mortar 1:6(1 cement: 6 coarse sand) incl. c/o carriages

Extra for brick work withj commom burnt clay bricks / cememt concrete bricks in super structure above plinth level up to floor five level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1cement:2coarse sand:4 graded stone agg. 12.5mm nominal size) and curing complete. Incl. c/o carriages

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete. 50 mm thick with 20mm nominal size stone aggregate INCLUDING ALL CARRIAGE

Steel reinforcement for RCC work including starighting, cutting, bending , placing in position and binding all complete(TMT steel)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. complete Size of tile 600x600 mm

Tile work in skirting, risers of step and dedo upto 2 metre height, over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.

Centring and shuttermg including strutting, propping etc. and removal of formwork for·

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs , landing , balconies and access platfarm

Lintel,column, Beams, plinth beams girders, bressumers and cantiliver

Edges of slab below 20 mm size

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat With common burnt clay (non modular) brick tiles of class designation 10

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase

Plastering with plaster in 1:6 mix

12 MM thick (inside)

15 mm thick (outside)

Plastering with 6 mm thick 1:3 mix (ceiling)

Providing wood work in frame of doors, windows,clerestory windows and other frames rot framed and fixed in position with hold fast lugsare with dash fasteners of required dia and length ( hold fast lugs are dash fastener shall be paid for seperately)

Sal Wood

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled M.S. but hinges with necessary screws excluding, panelling which will be paid for separately. Second class deodar wood.

providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw . Second class deodar wood

Distempering with oil bound distemper of approved brand and manufacturer (two or more coats) on new work including priming coat of cement primer. (Asian/Nerolac)

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.

Anodised Aluminium handles 125 mm with plate 175x32 mm

Anodised Aluminium handles 75 mm with plate 125x32 mm

Anodised Aluminium tower bolt (barrel type) 200 x10 mm

Anodised Aluminium tower bolt (barrel type) 100 x10 mm

Oxidised mild steel hooks and eyes 100 mm

Anodised Aluminium sliding door bolt 300 x16 mm

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16A modular switch, connections etc as required

supply and fixing two module stepped type electronic fan regulator on the existing modular plate required. Switch box including connections but excluding modular plate etc

supply and fixinng modular blanking plate on the existing modular plate & switchbox excludingmodular plate as required

providing and fixing M.V danger notice plate of 200mm*150mm made of mild steel, at least 2 mm thick in single red color on front side as required

supply of LED batten 18W

Ceiling Fan 1200 mm Sweep along with fan rod and fan regulater complete

supply and fixing 25 mm square core aluminium cables as required

sign board

M/S AMARJIT SINGH