WBPWD/SEWEC/AED /NIQ-132/2018-19 (4th call)

Amount

Suply and fixing of Stage grid structure For hanging arrangement like light bars etc. to be made of 50mm x 50mm and 40mm x 40mm MS Sq.bar (Hollow) hung from roof/ Ceiling by MS plate at every cross joint and 25mm MS pipe should be properly welded and bolted with necessary fittings etc. Fly gallery with pair to be made by 50mm x 50mm x 6mm MS angle section Strengthened with MS flat bracings, the work will be completed in all respect including painting, a coat of black paint on a coat of red oxide Primer as per direction of Engg. In charge

Supply,Intallation ,testing and Commissioning of Light bar mechanism to be suspended from the Grid Structure Consisting of 90 mm dia bearing fitted pulley with MS bracket, 6mm,and 3mm dia steel flexible wire with adjustable strainer/ rope clamp, 50mm dia MS pipe including 1.0 ton capacity manual winch for operation of the light bar from the light perch/gallery. The entire work to be finished with one coat of Primer per direction of the Engineer-in -charge.

Supply,Intallation ,testing and Commissioning of 1000 watt PAR 64 light with lamp (Osram /Philips make) & fittings complete including the cost of all materials and as per direction of the Engineer-in -charge.

Supply,Intallation ,testing and Commissioning of Plano convex spot light fittings complete with all accessories including S&F 1000 watts lamp (Quartz Halogen- Osram /Philips make) etc. and connection all complete As per direction of the E-I-C.

Supply,Intallation ,testing and Commissioning of lx250W Wide Beam Metal Halide flood light fittings with all accessories and connection All complete as per direction of the E-I-C. (Philips/Bajaj make)

Supply,Intallation ,testing and Commissioning of Electronic Dimmer of 12 channel power pack input 220V-240V/50Hz AC output 6 x 220V- 240V/50 Hz AC power, each channel Continuous 2 kw, Analogue system etc. including internal wiring all complete as per direction of the E.I.C.( Make I.C, Tribute. M.S.S. Or Eqiv)

Supplying, installation, testing & commissioning 18 channel Electronic Dimmer DMX console with sheet metal body, individual 18 channel sliding, knob local master channel-3, mother master-1, chaser, blink facility analogue system all complete as per direction of the E.I.C.( make I.C, Tribute. or eqv.)

Supplying, installation, testing & commissioning of Patch-panel-board(36ckt) with sheet metal body, non-contact Bakelite sheet, Anchor make Top & Socket, MCB, switch, indicator lamp, volt Meter,. Each dimmer four /three lantern Patching on each circuit earthling terminal etc. and wiring all complete as per direction Of the Engineer-in-charge.

Supplying and fixing of flush type 250V 3 pin 15 Amp socket with 15 A receptacles floor pockets on metal box and earthling attachment etc. all complete as per direction Of the Engineer-in-charge.

Supplying, installation, testing & commissioning of Power Distribution panel for stage light of required capacity complete with fuses (make: Approve by EIC) etc. as per Direction of Engineer-in-charge.

Supply,Intallation ,testing and Commissioning of LED PAR: 54x3 W (12R+ 18G+ 12B+ 12W), 15Degree/30Degree/ 45Degree/60Degree LED PAR OF IP65 rating, having life of 30,000 Hrs & delivery 4200 Lumens. The Fixture should have capability to work on standby mode ,via DMX 512 or integrated sound - 2 Light program including fixing ACCESORIES such As jack and installation clamp//bracket Make:-sholite /Modem stage service/ V.B .Light/ DTS.

Supplying and laying of 14/0.2mm 2 С Screened DMX signal cable cu flexible wire PVC PIPE /Cable tray.

Supplying and laying of 3 core 1.5 Sqmm Flexible coper round cable as per direction of EIC.

D.D ELECTRICALS

SPARK ENTERPRISE