PROVN OF FENCING AND GATE COVERING AT TARANJUBARI MD ACCN AND CERTAIN OTHER SANCTIONED WORKS UNDER AGE BR I OF GE SUKNA

Amount

BOQ Part-I (B/R Work)

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry, etc, and including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc,) and including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm but not exc. 10 cm long complete all as specified and directed.

All as per Sl item No. 1.05 above but length not exc. 5 cm long.

Dismantling chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, complete all as specified and directed.

Supply only chain link MS galvanized fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire complete all as specified and directed.

Dismantling steel barbed wire fencing of any dia and type fixed in any position (Each line of wire to be measured) complete all as specified and directed.

S&F galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as as specified and directed (each line wire to be measured).

M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L preparation of new steel surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in a different tint and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L brick work with fly ash brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 and complete all as specified and as directed. Make :- ICL Concrete Industries / Koshi Brick Industries Pvt Ltd / Vaishnodevi Buildcon Private Ltd / Shankar Oil & Saw Mills

M&L brick work with fly ash bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed. Make :- ICL Concrete Industries / Koshi Brick Industries Pvt Ltd / Vaishnodevi Buildcon Private Ltd / Shankar Oil & Saw Mills

M&L coloured glazed ceramic tiles 300 x 200 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 & dismantling complete all as specified and directed. Make :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd

M&L RCC 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

All as per Sl item No. 1.21 above but for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified and directed.

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos. 8 mm dia TMT bars in full length of wall at every fourth course complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Sl item No. 1.29 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.

S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Prestar.

All as per Sl item No. 1.32 above but plain steel sheet.

M&L use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surfaces of concrete, flat / curved complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in chajja complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. Note:- Consolidated thickness shall only be measured and paid.

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, floors, hardstanding etc. complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in CM 1:4 using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L 10 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling, chajja, soffits etc, and finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited

M&L 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) laid above PCC sub floor complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed. Make:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd

M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. Make :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2010 Part-II Rates) complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino

S&F steel window with side hung shutter and including box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. Make:- Tata / Jindal / Sail

S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. Make:- M/s Bharat / M/s Classic / Alans

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make: M/s Bharat / M/s Classic / Alans

S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison

S&F 125 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make: M/s Bharat / M/s Classic / Alans

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Saint Gobain / Modiguard / Asahi India / Triveni Float / IAG / Hindustan Pilkington

All as per Sl item No. 1.54 above but figured glass, pin head type.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as plinth protection, hard standing etc, complete all as specified and directed.

M&L preparation of newly plastered wall surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

All as per Sl item No. 1.58 above but on ceiling surfaces.

M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

All as per Sl item No. 1.61 above but 110 mm bore.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore bend of any radius complete all as specified and directed.

All as per Sl item No. 1.64 above but 110 mm bore.

S& F 100 mm bore cast iron ‘P’ or ‘S’ trap complete all as specified and directed..

S&F vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and excluding connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Parryware Cat No -C0117 (White) or equivalent in Cera / Hindware

S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, waste coupling and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Parryware / Cera (1st quality) / Hindware Make of waste coupling - Prayag / Polytuf. Make of PVC waste pipe - Prayag / Polytuf

S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Prakash

All as per Sl item No 1.70 above but 20 mm bore.

S&F 15 mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90gms) complete all as specified and directed. Make:- Prayag Cat No. -141-O or its equivalent in Polytuf

S&F 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 grams) complete all as specified and directed. Make:-Prayag cat No. 121-O or equivalent in polytuf

S&F 15 mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 110gms) complete all as specified and directed. Make:-Prayag cat No. 130-O or equivalent in polytuf

S&F 32 mm bore PVC waste pipe for WHB / Sink etc. complete all as specified and directed. Make:- Prayag Cat No - 327 or equivalent of Polytuf

S&F PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. Make:- Parryware (Slimline TIPTOP) Cat No.- E8303 (Single flush) or equivalent of Cera(1st quality) / Hindware.

S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm complete all as specified and directed. Make:- Prayag Cat No.- 323-T or equivalent in Polytuf

M&L waste fittings 32 mm bore, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. Make :- Prayag / ESSCO / Gem / Parko

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag Cat No. 152 or equivalent in Polytuf

M&L use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M&L RCC 1:2:4 Type B1 (20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like and complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks of 500 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Polywell Make of ball valve:- Prayag Cat No. 152 or equivalent in Polytuf

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, bore of pipe 150 mm complete all as specified and as directed.

S&F towel rail 20 mm dia & 600 mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. Make:- Prayag, Cat No- BA-01 or equivalent of Gem / Parko

S&F 75 mm bore PVC (SWR) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed. Make:- Supreme / Prince / Kisan

M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L 3 mm thick and 38 mm wide glass dividing strips inserted in position, conform to design complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 105 x 60 mm size pressed steel door frames for doors with one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F 30 mm thick pre-laminated medium density fibre (MDF) board flush door shutter, both side laminated of approved colour, interior grade complete all as specified and directed. Make:- Greenply Industries Ltd. / Balaji Action Buildwell / Novapan / National / Kitply

S&F 100 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make: M/s Bharat / M/s Classic / Alans

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make: M/s Bharat / M/s Classic / Alans

M&L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed.

M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal in plan for rough finished surfaces of concrete complete all as specified and directed.

Use and Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete including demoliton complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts including demoliton complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe - 410 - W (Gde E - 250) Quality - A and including dismantling complete all as specified and directed.

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 & dismantling complete all as specified and directed. Make : Lovely / Anjali / Bharat Flooring / Hindustan tiles / Mehtab tiles

BOQ Part-II (E/M Work)

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLS copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid PVC medium grade casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLS copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc including all other fixing accessories for one light / fan / exhaust fan point controlled by one 5 / 6 Amps switch complete all as specified and directed. Make of cable :- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. Make of PVC casing caping:- Presto Plast / Finolex / Kalinga / Payal

All as per Sl. item No. 3.01 above but for one 5 / 6 Amps socket outlet point on the same board.

M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLS copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid PVC medium grade casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLS copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 15 / 16 Amps socket outlet on independent board complete all as specified and directed. Make of cable :- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. Make of PVC casing caping:- Presto Plast / Finolex / Kalinga / Payal

M & L for sub main wiring with 2 runs of 2.5 Sqmm main wire alongwith 1 run of 2.5 Sqmm earth wire (green in colour) single core FRLS PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size non-metallic PVC medium grade casing-capping (double lock pattern) with all fittings & accessories on walls / ceiling surfaces etc. complete all as specified and directed. NOTE :- Two runs of main copper conductor, one run of earth wire and one run of PVC casing capping shall be measured as one unit length. Make of cable :- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. Make of PVC casing caping:- Presto Plast / Finolex / Kalinga / Payal

S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed. Make :- Havells / Anchor / Legrand

S&F socket outlet 5 pin 5 / 6 Amps, 240 volts complete all as specified and directed. Make :- Havells / Anchor / Legrand

S&F switch socket combination 2 in 1, 6 Pin, 5 & 15 Amp, flush type universal complete all as specified and directed. Make :- Havells / Anchor / Legrand

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Make:- Havells / Anchor / Legrand

S & F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, rated bus bar for fixing MCB complete all as specified and as directed. Make :- L&T / Legrand / Siemens / ABB / Schnieder / Havells

S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / Legrand / Siemens / ABB / Schnieder / Havells

S&F LED light fitting 1 x 20 watt batten type 230 Volts, extruded aluminium housing, suitable for surface mounting, with integrated high effeciency driver etc. all electrical accessories, pre-wired upto terminal block, fixed with 02 Nos of PVC round / square blocks, screws etc. inlcuding electrically connecting complete all as specified and directed. Make:- Crompton, Model - LDL-20-CDL or HPL, Model - HLPT51520CW or equivalent in Eveready Industries India Ltd. / Bajaj / Philips / Havells / Wipro / Surya / C&S / Jaquar & Co. Pvt. Ltd. / Syska / Surya

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

Supply and installation in repairs of advance encapsulated compound based CPRI tested maintenance free, pipe-in-pipe technology upgraded (zinc and alloy coated), zinc coated (80-100) microns with pure zinc (99.9%) & alloy coating (200-250) microns, earthing system conforming to IS 3043 having outer and inner pipe not less than 76.2 mm dia and 41.9 mm respectively, 3 m length, zinc coated with additional special alloy coating 300 mm on the topside for additional protection of the terminal. The annular space between the pipes shall be filled up with compact fills (CF) (crystalline conductive compound). The compact fill (CF) mixture which is machine pressed in the pipes should not disintegrate or collapse when outer pipe corrodes. The inner pipe shall be extended with terminals for connectivity includiing digging the pits and refilling the same by electrodite back fill compound (ground enhancer), the BFC should be eco friendly ie. it should not contain environmentally hazardous material / metal having ROHS certification from NABL accredited lab. The earth pit shall be provided with a FRP earth pit cover for protection and safe guard of terminals. In case of poor quality of soil obtained from excavation, good quality earth shall be arranged by contractor at his own cost to fill the excavated pits by mixing the same with BFC 2 to 4 bags extra per pit / unit as directed. The material should have good electrical conductivity & anti-corrosion property in wide range of soil conditions. Make:- Ashlok / Indelec / MAK mat

KARMIBRINDA

M/S B B CONSTRUCTION

PS ENTERPRISE

SURESH JHA

Jagatbandhu Enterprises

M/S RANEN PAL

DEBABROTA ROY CHOWDHURY