Road and Drain

Earth Work excavation for road boundary drains as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MOR / 304 MORTH. For C/o CC Drain - Mechanical

Earth Work excavation for road boundary drains as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification 305 MOR / 304 MORTH. For C/o CC Drain - Manual

Supply and Filling of HBG stone chips 2.36 mm and below in foundation trenches including cost & conveyance of all materials, labour charges, seigniorage charges etc., complete.

Plain Cement concrete nominal mix (1:4:8) prop (Cement : fine aggregate: coarse aggregate ) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work.for foundation and under flooring bed. for C/o CC Drain

Plain cement concrete M15 using 20mm 10mm dia graded metal including cost and convence of all the material and labor charges etc.,complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH. for C/o CC Drain

Providing VRCC M- 30 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work and including centering, shuttering.

Providing High Yield Deformed (HYSD) steel bars (Fe 500/500D/550D From Primary Producers like TATA,SAIL,VSP,JSW Steel grade asper IS 1786 - 1985) OF 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20 SWG cost and conveyance of bars from approved sources to site of work, including cost and conveyance binding wire for finished item of work.

BLD-CSTN-2-9 modification.; Filling with excated earth by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Earth work excavation and depositing on bank with an initial lead of 50mts and lift of 3mts in loamy clayey soils like B.C red earth ordinary gravel and hard gravelly soils etc. complete.

Construction of gravel / soil aggregate base by providing well graded material, spreading in uniform layers with motor (Tractor) grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 KN static roller to achieve the desired density, complete as per Technical specifications.

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Macadem specification including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification 406 (5th revision) for finished item of work

Supply of 25 mm thick high performance expansion joint filler board placing the same 25 mm below top of pavement slab, sealing with bituminous hot sealing compound (Grade 'A' ISI)/polysulphide at 5 m interval in CC pavement including cost and conveyance of all materials but excluding labour charges for placing in position, for expansion joints conforming to MORTH specification No. 602 - polysulphide at 5.00 mts interval in CC pavement including cost and conveyance of materials, labour charges etc. complete.

Supply and placing Seperation membrance of impermeable plastic sheeting 125 micron thick including cost and conveyance of materials, labour charges etc. complete.

Laying of M30 mix with HBG machine crushed metal with cube strength of 30N/mm2 at 28 days work test on 150x150x150mm cubes in cement concrete payments as per drawing including cost,seigniorage and conveyance of all materials centtring, machine mixing laying vibrating and curing, hire and operational charges of all T&P etc. complete for CC pavements.

Providing Gravel Shoulders by using gravel, spreading gravel in uniform layers with consolidating each deposited layer by watering and ramming including cost and conveyance of gravel and water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.