SPECIAL REPAIRS REPLACEMENT OF OHT IN ECOs NHL AND CERTAIN REVENUE MINOR WORKS UNDER GE MCEME SECUNDERABAD

Amount

S & F 2000 Ltr capacity of rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) double layered ,hoisted and fixed in position as directed.

S & F 1000 Ltr capacity of rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) double layered, hoisted and fixed in position as directed.

Dismantling water tanks exc 250 but n.exc 500 ltr and removing from site complete all as directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any descritpion all as directed by Engineer-in-Charge

Demolition of brick work of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing and connections 15mm bore and removaling from site all as directed.

Taking up or down steel tubing and connections 20mm bore and removaling from site all as directed.

Taking up or down steel tubing and connections 25mm bore and removaling from site all as directed.

Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings 15mm bore on walls/ceiling or laying in floors complete all as specified and directed

Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings 20mm bore on walls/ceiling or laying in floors complete all as specified and directed

Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings 25mm bore on walls/ceiling or laying in floors complete all as specified and directed

S & F 32mm dia ball brass valves, high pressure with polythelene float and fly nut complete, screwed for iron pipe or for brass ferrule .

S & F 20mm dia ball brass valves, high pressure with polythelene float and flynut complete, screwed for iron pipe or for brass ferrule .

S & F 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F 15 mm Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed

S&F 20 mm Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed

S&F 25 mm Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed

M&L RCC M-25 (Design mix) using 20 mm graded stone aggregate for walls/slabs for water tanks bases of any thickness all as directed by Engr-in-Charge. Note : Formwork and reinforcement shall be measured and paid separately.

M&L Formwork to sides of walls, pillars, posts, slab, columns, and stanchions with rough finish flat concrete surfaces complete all as directed by Engr-in-Charge.

M&L MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending, sprillay for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed

M&L for Brickwork with fly ash bricks, using old sized bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as directed.

Taking down cement plaster or cement lime plaster of any description including racking out joints and hacking for key and scrubbing down with water etc.

Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces finsished even and smooth without using extra cement.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as directed

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as directed

S&F PVC (SWR) vent cowl 110mm dia

Demolition of stone slabs and tiles of any description or thickness as in floors, aprons etc. laid, bedded and pointed in any mortar.

M&L for 75mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc.

M&L for machine pressed precast concrete interlocking paver block of any size/shape confirming to IS 15658-2006 of 80mm thickness M-40 Grade using grey cement and no pigments all as specified and as directed.

M&L for 50mm thick sand cushion / sand filling under floors or in foundations including watering and consolidation complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as directed

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM(1:6) complete

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados,skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified

S&F Vitreous China white Urinal, Half stall type, connected to waste pipes, PVC water connection and all accessorise complete all as directed

S&F PVC connection pipe 15mm bore 450mm long complete all as specified

S&F in repairs 15mm, stop valves/ angle cock (Push type), cast copper alloy CP with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified

S&F in repairs Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified

S&F for High density polyethylene pipes (HDPE) 40mm of pressure rating 6 kgf/cm2 laid in trenches including taking out the old pipes.

S&F in repairs, PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified.

Dismantling PVC water tanks of capacity exc 500 & n exc 1000 litres complete as directed.

S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe.

S&F Ball brass valves 25mm bore, high pressure, with polythene float & flynut , screwed for iron pipe or brass ferrule complete

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises.

M&L PCC (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection of average 75mm thick finishing cement concrete surface even and smooth without using extra cement.

M&L for preparing the new plastered wall surfaces and applying two coats of OBD over a coat of primer over two coats putty finish complete all as directed by Engr-in-charge

M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement)

Dismantling boarding and old curtain rods of any description, fixed in any position with nails.

S&F for SS curtain rail/drapery rod 25mm dia of approved pattern alongwith decorative SS brackets of approved quality and pattern fixed with screws complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in hard/dense soil all as directed.

Excavating over areas n exc 1.5m deep and getting out in hard dense soil all as directed.

M&L for hard core of broken stone or boulders of guage n.exc. 63mm deposited spread and levelled in layers n.exc. 15cm thick watered and rammed to a true surface.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate 150 mm thick as in sub base etc.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate 200 mm thick as in florring finished even and smooth without using extra cement complete all as specified and directed.

Excavating in post holes (or similar holes) in hard dense soil each n.exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface.

S&F mild steel bolts purpose made, with hexagonal or square heads at one end and screwed the other, diameter of neck 12 to 20mm.

S&F mild steel plates, plain or chequered, forming holes, without any attachment conforming to Fe 290 Gde E-165.

S&F steel work in tubular posts and trusses including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161 1979 Gde st-240.

S & F rolled mild steel structural steel work of angle, channel etc. confirming to Fe-410-W (grade E 250) quality 'A', fixed as in purlins, brackets etc,complete all as specified and as directed by Engineer -in-Charge.

S&F mild steel flat iron as in supports for wind ties, wall ties, clamps and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed by Engineer -in-Charge.

M&L for 2 coats of synthetic enamel paint including preparation of new steel surface of any description over 10 cm width and girth.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in kerbs, edging, bed plates, coping and similar work including necessary form work all as specified

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering etc fixed with self tapping screws as specified

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, etc fixed with self tapping screws as specified

Removing excavated surplus soil to a distance n exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point.

M&L for Chequered cement concrete tiles glossy finish machine pressed rubber moulded designer type 30 cm x 30 cm x 22 to 25mm thick with white cement and pigments, set, jointed in neat cement slurry in floors including 20 mm thick cement mortor bedding in CM 1:4 complete all as specified and as directed.

M&L RCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in pre-cast cover slabs for manholes including necessary form work, set in CM 1:6 all as specified. (Reinforcement will be measured & paid separately)

M & L for Point wiring on concealed conduit with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 V grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS, duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for One light point controlled by one, one way switch 5 A, SP

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

Supply & Fixing LED tube light fitting retro type single tube 1x18 watts 230 volts complete with all accessories , prewired fixed to wall/ceiling with 2 Nos wooden round blocks with necessary hanging/fixing arrangements & connecting to the point wiring with necessary flexible copper conductor of multisranded three core of suitable length from fitting to the ceiling rose in and including LED tube rod 18 W complete all as specified. Make: Havells Cat Nos LHFYBWP1TB1W020&LHLDDAXEUL8Z018 or equivalent in CG/Philips/C&S

S and F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with locking system complete all as specified.

Supply & Fix MCB TPN 40 Amps, 10 KA ,240 volts C' series suitable for fixing on MCB DB's complete all as specified.

Supply & Fix MCB SP 6-32 Amps, 10 KA ,240 volts C' series suitable for fixing on MCB DB's complete all as specified.

S&F sheet metal enclosure with 3 pole and Earth MetalPlug & Socket including 40A TPN MCB complete all as directed by Engr in Charge. Make: INDO ASIAN / STANDARD / HAVELLS.

Supply & Lay on wall/in ground/on pole ISI marked XLPE insulated, armoured, heavy duty, electric cable of size 4 Core X 6 Sqmm with stranded aluminium conductor 1100 volts complete all as specified and directed. Make : NICCO/HAVELLS/UNIVERSAL/GLOSTER/POLYCAB.

Supply and fixing Ceiling fan 1200 mm sweep, five star rated, energy efficient, 220 Volt, 50 Hz, copper winding, double ball bearing, white colour complete with down rod ,canopy set, Shackle kit, including 23/0.019, 3 core cable from ceiling rose to fan complete all as specified and as directed. Make - HAVELLS, CROMPTON,STANDERD Or as approved by GE

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level, earth plate connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR (Part-I) , including necessary excavation and earth work in any type of soil and adequate quantity ofcommon salt charcoal for alternate layer around the earth plate including PCC (1:2:4) pit and pit cover , including 20mm dia GI pipe for watering purpose with the arranagement of funnel and wire mess, including G I pipe of 15mm dia for earth lead protection complete all as specified and directed. Note :- Item of Earthing includes cost of 7.5m long galvanised earth lead wire 4mm size and protection pipe of 15 mm bore GI light grade.

SAI RUPA CONSTRUCTIONS