MAINT OF ES INSTALLATION, WS INSTALLATION AND NCPSC ACCN IN AKHNOOR MIL STN UNDER GE SOUTH AKHNOOR.

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete,complete all as specified and as directed.

Excavating in post hole (or similar hole) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil,complete all as specified and as directed.

M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in foundation filling and mass concrete in foundation including necessary formwork,complete all as specified and as directed.

M&L for plain cement concrete M-10(1:3:6), type C-1 (using 20mm graded crushed stone aggregate), as in fixing angle iron fencing postincluding necessary formwork , complete all as specified and as directed.

Dismantling of barbed wire fencing from posts etc complete and neatly coiled on rough drums/poles etc ,complete all as specified and as directed.

S&F galvanised, 2-strand, steel barbed wire 2.24mm dia barbed with 2.0 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured),complete all as specified and as directed.

Supply only mild steel galvanized chain link fencing of any mesh, size and any type (as decided and approved by GE),complete all as specified and as directed. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly.

Mild steel screw bolt (machine made) 5 to 10 mm dia with hexagonal or squre heads at one end and screwed the other end,each screwed end to be fitted with washers and one hexagonal nut ,not exceeding 5cm long ,complete all as specified and as directed.

Mild steel flat iron 40x6mm and struts in fencing including cutting tops to shape as directed,drilling holes, Fe 290 gde E-165 ,complete all as specified and as directed.

Mild steel posts and struts in fencing posts including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing chain link fencing) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165,complete all as specified and as directed.

M&L for cleaning of Static Water Tank (SWT) of capacity 15000 to 20,000.00 Galns Capacity by adoping method:- (a) Taking out the water from the sump with the help of manpower and removing accumulated sludging, debris and solid particles etc deposited at the bottom of sump and removing the same by the bleaching power solution & rubbing with wire brushes on all side walls and clean by the water ,complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) concrete in ground floors and paving not exceeding 15cm thickness ( below or above ground floors.),complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection joint filled with bitumen sand mixer, 50mm thick finished even and smooth without using extra cement ,complete all as specified and as directed.

M&L for roughening surfaces of old concrete floor by picking,sweeping clean and wasining down with water to remove dust etc after that applying brushing neat cement slurry with 3.0 Kg of cement per Sqm etc,complete all as specified and as directed.

M&L non-skid ceramic coloured designer pattern tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement 1:6 , complete all as specified and directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular)joint free, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, on vertical surface such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering as in backing coat of tiles in cememt mortar 1:4, complete all as specified and directed.

M&L non-skid ceramic coloured designer pattern tiles 300x300mmx7mm thick in floors etcset jointed in neat cement slurry and pointed in white cement or coloured cement to match etc including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement 1:6 , complete all as specified and directed.

M&L non-skid ceramic coloured designer pattern tiles 400x400mmx7mm thick in floors etcset jointed in neat cement slurry and pointed in white cement or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement 1:6 , complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by engineer in charge.

M&L glazed ceramic coloured designer pattern tiles 300mm x 450mm x7mm thick on vertical surface such as skirt, Dado etc. set and jointed in white colour cement including 10mm thick rendering as in backing coat of tiles in cememt mortar 1:4, complete all as specified and directed.

M&L for granite 20mm thick(table rubbed and polished including front side moulding ) in cooking platform and like including 15mm thick cement mortar 1:4 including pointing in white cement(1:2) using marble dust making holes in RCC shelves suitable for gas pipe with round edges where required complete all as directed.

M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping,demolition , cutting, chiselling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but not exceeding 3Kg/Sqm (if required) with or without facia and finished with cement mortar 1:3 using coarse sand and work in patches area not exceeding 5 Sqm and thickness RCC member not exceeding 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete. (note: welded mesh to be paid separately)

S&F expanded metal weight not exceeding 4 Kgs/Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, complete all as specified and as directed .

S&F Tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore including taking down or up steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed .

S&F Tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 20mm bore including taking down or up steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed .

S&F Bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified and as directed by engineer in charge.

S&F Stop valves, CP cast copper alloy, 20mm screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and as directed by engineer in charge.

S&F stop cock fancy type chromium plated with cast copper alloy screwed down high pressure with or without lathered hot and cold with long shanks(concealed type) and fly nuts fixed in repair 15mm bore, complete all as specified and directed.

All as per item 29.00 above but angle valve 15mm bore complete all as specified and as directed .

S&F brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipes and fixed in repair complete all as specified and as directed .

S&F in repair for wall mixer with provision of shower for mixing hot and cold water 3 in 1 fancy type brass chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed 15mm bore ,complete all as specified and as directed .

S&F in repair PVC connection 15mm bore size with PTMT nuts of length 45cm ,complete all as specified and as directed .

S&F in repair PVC valveless symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets. 10 ltr capacity ,complete all as specified and as directed .

S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed in repair 20mm bore ,complete all as specified and as directed .

S&F in repair Acrylic shelf 450mm long and 100mm wide fixed over WHB of approved quality as per sample ,complete all as specified and as directed.

S&F Rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltr capacity including dismantling water tanks and removing to store,complete all as specified and as directed.

S&F as in repair Rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 ltr capacity,complete all as specified and as directed.

S&F in repair vitreous china wash basin, white flat back size 550x400mm excluding taps, waste chain and plug and proclain stopper but including bracket,complete all as specified and as directed.

Supply and fixing in repair vitreous China squatting pattern Orissa pattern WC size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding ,complete all as specified and as directed.

S&F in repair Vitreous China Urinal, Half stall type, white including PVC waste coupling,PTMT urinal spreader (excluding flushing cistern, flush pipe and waste pipe),complete all as specified and as directed.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms),complete all as specified and as directed.

S&F for fancy brass chromium plated shower rose 125mm fixed in repair , complete all as specified and directed.

S&F in repair CP grating 150mm dia with centre hole , complete all as specified and directed.

Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flush pipe but excluding flushing cistern) and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making good to dismantled/ damaged floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), fixing in repair,complete all as specified and as directed.

S&F in repair for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position, complete all as specified and as directed.

S&F in repair CP Jet spray with plate and suitabel brinded Hose flaxible pipe, complete all as specified and as directed.

S&F in repair stainless steel Toilet paper holder fixed to wall, complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete,complete all as specified and as directed.

S&F in repair 32mm dia waste pipe for WHB, complete all as specified and as directed.

Taking down chowkhat or frame with shutter(without taking off shutter from frame) exc 1.5 Sqm and not exceeding 4 Sqm, complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from frame) n.exc 1.5Sqm each, complete all as specified and as directed.

Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each, complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with M.S. square tube supplying and fixing in opening as per specification and drawing, complete all as specified and as directed.

M&L for Mild Steel framed work as in doors or gate, coolers stand of angle or others section etc confirming to Fe 410-W (Gde -E- 250) quality A , complete all as specified and as directed.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 125x60mm, complete all as specified and as directed .

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size of frame 105x60mm, complete all as specified and as directed.

M&L for plain cement concrete M-10(1:3:6), type C-0, (using 12.50mm graded crushed stone aggregate), nominal mix, as in cills, steps; plinth courses, string courses, lacing courses, copings, kneelers, apex stones, bed plates and in hold fasts or filling in hollow of steel frame, including necessary form work, complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F 35 mm thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated, complete all as specified and as directed.

S&F factory made glazed and skeleton shutters open rebated and prepared to receive (glass) gauze (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified 35mm thick 2nd class HW, complete all as specified and as directed.

S&F factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. incl galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm incl 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm each panes all as shown on drawing No. CEUZ/TD-1304 sheet 1/3 to 3/3 as applicable , complete all as specified and as directed.

S&F for factory made steel ventilator, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter, jointed internally with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs, Galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and 3mm thick ordinary sheet glass pans with oil putty and clips etc, complete all as specified and as similar to shown in drawing No- CEUZ/TD-1304, sheet No- 1/3 to 3/3 , complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with clips in square n. exc. 0.5 Sqm Each pane 4mm thick including hacking out old broken glass , complete all as specified and directed.

Supply and fixing of cupboard shutter 20mm thick (style) factory made pannel PVC incl chowkat framemade out of m.s tubes 19 gauge for top and bottom rails m.s frame shall be covered with heated moulded plain colour PVC © channel having a PVC sheet strip of 10mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side 10mm (5mmx2) thick of 20mm and 20mm cross PVC sheet and as gap insert for top and bottom rail. Pannelling for plain colour PVC sheet to be fitted in the m.s frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying fixing in the frame at site as per specification and drawing as in repairs, complete all as specified and as directed.

S&F Galvanised Mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.

S&F in repair for glavanised Mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvnaised wire staples, complete all as specified and directed.

S&F in repair PVC bath room cabinet of size 535 x 483 mm x 110 mm with mirror , complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150mm long, complete all as specified and as directed.

S&F Aluminium anodised handle of extruded section and fixed 150mm long, complete all as specified and as directed.

S&F 300mm brass ordinary rat tail rod pattern spring including roller plate , complete all as specified and as directed.

Aluminium alloy anodised sliding door with hasp staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 250mm long, complete all as specified and as directed.

Preparation of new or previously untreated wood or wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome primer, complete all as specified and as directed .

Preparation of old steel surface of any description over 10 cm width or grith and applying one coat of synthetic enamel paint , complete all as specified and as directed.

Floor doors stoppers of aluminium alloy body and tenque anodised with hard drawn steel spring fixed in floor 150mm long, complete all as specified and as directed.

S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg Aluminium(Die cast )body and fixed, complete all as specified and as directed.

S & F Butt hinges, medium weight cold rolled mild steel 100mm long to PVC Door etc, complete all as specified and as directed.

S&F epoxy powder coated with fixing brackets curtain rods of mild steel 25 mm with and including pair of fancy type finnals complete fixed as in repair, complete all as specified and directed.

Dismantling Asbestos cement corrugated sheet in roof covering, complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws , complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridges, fixed with self tapping screws as, complete all as specified and as directed.

Dismantling of timber scantling in fillets, rails,posts, rafters, purlines etc under 40 Sqcm in section, complete all as specified and as directed.

M&L for rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410 -W (GdeE- 250) quality A , complete all as specified and as directed.

S&F Mild steel screw bolts 16 to 20 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 22.5 cm and not exceeding 30cm long, complete all as specified and as directed.

Dismantaling wrought iron or mild steel work of any description , complete all as specified and as directed.

S&F Mild steel work for wind tie,wall tie, hooks for hanging fan, plane angle cleat for securing purlins to steel trusses or rafters , gusset plate similar work conforming to Fe-410-0 or Fe-310-0, complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets , complete all as specified and as directed.

Providing and fixing board 4mm thick, designer, in ceiling including Gi snap grid frame work of main,tee and angleas per manufacturer’s instructions , grid size 605x605mm, for false ceiling all as specified, and hangers 4mm dia,lengthb required upto adjusting level fixed to roof slabs/truss/purline by meaning of ceiling and expansion hold fasteners(where reqd over RCC slab) 12.50mm dia, 40mm long, complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles , complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks straight or curved in plane exc 6cm mean radius built in cement mortar 1:6, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.

M&L 15mm thick plastering on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement in cement mortar 1:6, complete all as specified and as directed.

M&L 5mm thick plastering on fair faces for cone surfaces finished even and smooth w/o using extra cement in cement mortar 1:3 on ceiling, complete all as specified and as directed.

M&L for Preparation of new surface of wall and apply with 1 mm thick wall care putty, on plastered surfaces,preparatory to distempering and applying two coat of oil emulsion white or tinted on wall over one coat of primer , complete all as specified and as directed.

M&L for Preparing of new plaster surface of wall and applying two coats of white wash over one coat of primer , complete all as specified and as directed.

M&L for complete removal of existing treatment from surface of wall and applying two coats of white wash , complete all as specified and as directed.

M & L for preparation of new plastered surface of wall and applying by finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) , complete all as specified and as directed.

M&L for Preparing of new plaster surface of ceiling and applying three coats of white wash , complete all as specified and as directed.

M&L Preparing of new plastered surface walls and applying two coats of cement paint over one coat of lime wash, complete all as specified and as directed.

Preparation of old/ decorated plastered or unplastered surfaces of walls and applying one coats of cement paint, complete all as specified and as directed.

Preparation of old/ decorated plastered or unplastered surfaces of walls and applying one coat of white washing, complete all as specified and as directed.

Preparation of old/ decorated plastered or unplastered surfaces of ceiling and applying one coat of white washing, complete all as specified and as directed.

Preparation of old/ decorated plastered or unplastered surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper, complete all as specified and as directed.

Preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment and applying one coat of exterior emulsion (Apex paint), complete all as specified and as directed.

Preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment and applying two coats of exterior emulsion (Apex paint), complete all as specified and as directed.

Preparation of old/ decorated plastered or unplastered surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion, complete all as specified and as directed.

Preparation of old/ decorated plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion, after preparing of surfaces, complete all as specified and as directed.

Complete removal of existing treatment of plastered or unplastered surfaces of walls and applying two coat of cement paint, complete all as specified and as directed.

Preparation of new/ old plastered or unplastered surfaces of walls and applying wall care putty in two layers, 3.0mm thick, as preparation of surfaces including priming coat before applying any paint or oil emulsion, complete all as specified and as directed.

Preparation of old painted wood/ wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement motar and taking out from floors or walls complete with all fittings , complete all as specified and as directed.

Dismantling of 75mm dia cast iron or reinforced concrete drain pipes, jointed in cement motar and taking out of trenches , if required , complete all as specified and as directed.

S&F for PVC (SWR) pipes110mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F for PVC (SWR) pipes75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S&F for PVC (SWR) pipes75mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia any radius, complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia any radius, complete all as specified and as directed.

S&F PVC (SWR) 110mm dia junction double, (double T), equal or unequal with access door, complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm dia, complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75mm dia, complete all as specified and as directed.

S&F PVC (SWR) 'S’ trap 110mm dia, complete all as specified and as directed.

S&F PVC (SWR) branch piece110mm dia, single (single Y) equal or unequal, complete all as specified and as directed.

S&F PVC (SWR) branch,. piece75mm dia, single (single Y) equal or unequal, complete all as specified and as directed.

S&F PVC (SWR) branch piece110mm dia, double (double Y) equal or unequal, complete all as specified and as directed.

S&F PVC (SWR) 'P’ trap 110mm dia, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc not exceeding 10 sqm on plan and getting out in any type of soil, complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm , complete all as specified and as directed.

Removing excavated material (soil) exc 50mtr and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC/PVC pipe t n.exc 150 mm dia including all fittings, complete all as specified and as directed.

M&L for plain cement concrete(1:3:6) type C-2(using 40 mm graded stone aggregate) as in bed to 150 mm dia internal pipe including packing under & haunching against the sides of pipes after they are laid tested , complete all as specified and as directed.

S&F salt glazed stone ware drain pipes 150 mm internal dia grade 'A' laid in trenches ,jointed & tested , complete all as specified and as directed.

M&L for providing precast cement concrete louvres and jallies Type B-0 1:2:4(12.50mm graded crushed stone aggregate), 75mm thick set in cement mortar 1:6 (measured solid), including all mouldings but excluding frame,including form work, complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M&L for plain cement concrete 75mm thick type E- 2, 1:5:10(40mm graded crushed stone aggregate) as in sub base including form work , complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with gray cement and pigment including 25mm thick sand cushioning etc, complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-0 (Unsing 12.5 mm graded crushed stone aggregate)as in edging, coping, kerb stone etc.including form work , complete all as specified and as directed..

M&L for plain cement concrete 75mm thick P1:4:8 type D-2( using 40mm graded crushed stone aggregate ) as in sub base flooring including form work, complete all as specified and as directed.

Chequered cement concrete tiles glossy finish coloured 300mm x300mm x25 mm thick pattern as approved by GE as in floor set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over(with greypigment cement and pigment), complete all as specified and as directed.

M&L for taking out/cleaning away/cutting of all grass,saplings, shrubs, brushwood, undergrowth, roots, and plants on the roof top and alongwith the lateral surfaces of walls of buildings by chiesling and making good to disturbed surface in cement mortar 1:4 including removing rubbish outside the periphery of cantonment area, complete all as specified and as directed.

Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 Cm high, paiting with synthetic enamel paint, of black and white colour, complete all as specified and directed by Engineer-In-Charge. Note: Letters etc; shall be painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained, complete all as specified and as directed.

M&L for rendering 15mm thick on concrete surface finished even and smooth in cement mortar 1:3 as in sunken portion and laying water proofing treatment to sunken portion of WCs bathroom etc by applying cement slurrey mixed with Acrylic based polymer modified cementitious composite compound of makes as approved in technical Instruction 5/2003 :- (a) First layer of slurry cement @ 0.488 kg/ Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/Sqm .The layer will be allowed to air cure for 4 hrs. (b) Second layer of slurry of cement @ 0.242 kg /Sqm mixed with Acrylic based polymer modifiedd cementitious composite compound @ 0.126 Kg/Sqm the layer will be allowed to air cure for 4 hrs, complete all as specified and as directed.

M&L plain cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregates as filling under (sunken slab) floors, complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as sides of rounded or chamfered on edges of sunken floor complete all as specified and directed.

S&F 32mm dia G I pipe medium grade beveled cut at both ends & fix in walls sunken portion approx above the R C C slab and ceiling finished the hole with cement plaster 1:6 to match with existing surfaces complete etc., complete all as specified and as directed.

Deepak Enterprises (BID ID -3488070)

M/s Shivam Construction Co (BID ID -3488118)

KRISHNA BUILDERS (BID ID -3484319)

M/S KARAN SINGH CONTRACTOR (BID ID -3494034)

M/S JEEVAN LAL SHARMA (BID ID -3494392)