REPAIR TO ROOFING, CEILING, FLOORING ETC AT MIL STATION DAGSHAI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulationboards/kitchen cupboard , any thickness etc. including cover fillets complete all as specified and directed by Engineer-in-Charge

Dismantling timber scantlings 40 sqcm and under in section, in any position framed / Unframed work complete all as specified by the Engr-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each including iron mongries

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exe 4.0 Sqm each including iron mongries

Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified

S&F GI metal suspended ceiling system, GI lay in plain of 600x600x0.5mm (TEGULAR) edge tiles in globel white colour to be laid on strong 24mm Tee section flanges colour white having roatary stiching on the main runner with web height of 38mm complete all as specified and directed Note- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mmx600mm module. Cut cross tees longer than 600mm required independent support. 600mmx600mm module to be found by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres. (ii) The HCL sleeve anchor fastnor of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x37x25x1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete all as specified and as directed.

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc6 & n. exc 13 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads,complete all as specified

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc 13 & n. exc 25 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads,complete all as specified

M & L for 6 mmPlywood, grade BWR, type BB, fixed with screws to timber frame work all as specified including dsmantling of wall and ceiling board (fibre, pulp, insulation, etc) or insulationboards etc,, any thickness etc. including cover fillets complete

S & F for second class hard-wood(Hollock), timber fixed and clean sawn, in scantlings including dismantling of scantling in any position complete all as specified

S & F for 0.63mm Galvanised, Corrugated Mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and bend to curve all as directed including dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

S & F plain, galvanised, 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed including dismantling plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.d including dismantling plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.d including dismantling plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

S&F 2 mm thick fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc.

M&L for cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate) as in hard standing including necessary form work and finishing surface even and fair without using extra cement complete all as specified including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials )

Material and Labour Framed work such as grills, gratings,railing etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

Material and Labour for Welded steel wire fabric n.exc 4 Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified & directed complete all as specified and directed by Engr-in-Charge

M&L preparation of old painted NTP/CGI/PGI or other steel roof surfaces, eaves and gutters etc exc 10 cm width or girth and applying one coat of synthetic enamel paint of any tint as approved complete all as specified

ditto as per item No 21.00 above complete removal of existing treatment and applying two coat of synthetic enamel paint over a coat of primer.

M&L for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in sub base floor and in foundation including necessary form work complete all as specified and directed.including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials ).

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment set and jointed in neat cement slurry over 20 mm thick cement screed in CM 1:6 all as specified.all as specified and as directed including demolition .

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment set and jointed in neat cement slurry over 20 mm thick cement screed in CM 1:6 all as specified.all as specified and as directed including demolition .

M&L for Chequered cement concrete tiles 30 cmx 30cm x 25 mm thick, with grey cement and pigment set jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM 1:6 in floors with grey cement and pigments complete all as specified and directed including demolition .

M&L for PCC Type B1 1: 2:4 (20 mm graded stone aggregate ) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as in coping ,kneelers , appex stone, coping etc .including demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for and disposing off the rubbish materials all as specified and as directed

Taking down existing water proofing treatment of any description and removal rubbish off the premises, complete all as specified.

M&L, 10mm thick rendering in CM 1:3 on roof with liquid water proofing compound surfaces finished even and smooth without using extra cement, complete all as specified. Note: Liquid water proofing compound shall be measured and paid separately under item no. 30.00

Supply only Liquid water proofing compound

M&L, applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surface for laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surface by forced application complete all as specified.

M&L for cement concrete 1:2:4, type B1 (20mm graded stone aggregate) as in filling and mass concrete, roof slab padding preparatory to roof treatment, complete all as specified.

Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where complete all as specified and directed.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in road side parapet / Drain all as specified and as directed.

All as per item No 34.00 but except stone complete all as specified and directed

M&L for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed including demolition of brick masonary built in cement mortar including all quoins arches pillars commplete all as specified and directed

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as psecified.

M&L preparation of new plastered surface of wall and applying two coat of oil bound distemper of any approved tint over a coat of primer complete all as specified and directed

M&L preparation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer on walls complete all as specified and directed

S&F for 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified. Including taking up or down steel tubing and connections upto 15mm bore.

S&F for 20 mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified. Including taking up or down steel tubing and connections upto 20 mm bore.

M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including PTMT float valve of 15 mm dia and taking down old unserviceble PVC water tank all as specified in SSR Part-I completed and as directed by the Engr-in-Charge

M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including PTMT float valve of 15 mm dia and taking down old unserviceble PVC water tank all as specified in SSR Part-I completed and as directed by the Engr-in-Charge

M&L disconnecting existing over head steel/PVC water tanks, setting aside (or lowering, if required) for repairs, cleaning etc and hosting if required, reconnecting and refixing in position capacity exc 250 ltrs but n. exc 500 ltrs complete all as specified and as directed

M&L for precast RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in landing cover slab for kittchen platform manholes , septic tank set in cement mortor ( 1:6) including necessary form work complete all as specified and as directed. (Reinforcement shall be measured separately)including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in position not otherwise specifically provided for complete

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.5mm dia or securing with clips quality confirming to deformed or twisted bars complete all as specified and as directed.

S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/ wall complete all as specified including taking up or down waste and vent pipes of any type complete.

S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / wall complete all as specified and as directed including taking up or down waste and vent pipes of any type complete.

S&F PVC rain water half round gutter pipe of size 110 mm dia fixed with clamp up to a height 12 mtr including necessary scaffolding all as specified and as directed and taking up or down waste and vent pipes of any type complete.

S&F in reapir PVC rain water gutter drop elbow for 110 mm dia pipe fixed to PVC pipe all as specified and as dircted.

S&F in repair PVC(SWR) bend 110mm dia bore complete all as specified and directed by Engr-in-Charge

S&F in repair PVC(SWR) bend 75mm dia bore complete all as specified and directed by Engr-in-Charge

S &F Powder Coated Anodised aluminium frame for doors, windows, parttions , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F in repair 9mm thick pre-laminated particle board interior grade, both side lamination of approved colour and pattern fixed to wooden / aluminium frame work as in door/cupboard shutters including necssary fittings all as specified

S &F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S &F powder coated aluminium window and ventilator shutters, side hung type without sash , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-1 100 m long(2 Nos) suitable handle(1 Nos). and tower bolt 150 mm (2 No)complete al as specified.

S&L for sheet glass ordinary quality 4.00 mm thick in aluminium windows of area of each pane n.exc 0.50 Sqm including glazing clip rubbder beading etc.. Complete for fixed portion complete all as specificed and directed by Engr-in-Charge

S & F for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&L for sheet glass ordinary quality 4.00 mm thick in aluminium windows of area of each pane.exc 0.50 Sqm including glazing clip rubbder beading etc.. Complete for fixed portion complete all as specificed and directed by Engr-in-Charge

S&L for Figured glass 5 mm thick pin head type in aluminium windows of area of each pane n.exc 0.50 Sqm including glazing clip and rubber packing complete all as specificed and directed by Engr-in-Charge

S &F powder coated aluminum grill of approved pattern / design with approved standard section and fixed to the existing window frame with aluminum U clip of appropriate size and CP brass / stanless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodiesd aluminium standard section around the opening all complete all as specified and all as dircteded.

Amount of credit of Rs. 98359.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Sagar Builders

RR Builders

M/S CHOPRA & COMPANY

Durga Construction

shiv const co

R B TRADERS