REPAIR MAINTENANCE OF STREET LIGHTS AND ALLIED WORKS AT SUKNA AREA UNDER GE SUKNA

Amount

M&L for roof treatment in order of precedence as given below complete all as specified and as directed:- (i) 15 mm thick screed bed in CM 1:4 on surface. (ii) Cleaning of plastered surface and applying one coat of bituminous primer @ 0.40 Ltr / Sqm. (iii) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.60 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Contd...)

(iv) Applying one coat of water proofing paint with aluminium finish over APP as per manufacturer's instruction. Note :- (a) Bituminous primer shall be "ShaliTex Primer" manufactured by M/s STP Ltd or equivalent in M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited (b) Laying APP based polymeric membrane shall be done by torch on method as per manufactures instructions. (c) A minimum overlap of 100 mm and 75 mm should be made at the end and sides of the polymeric membrane respectively and all overlaps and joints shall be sealed as per manufacturers instruction. (d) APP based polymeric membrane shall be “SUPER THERMOLAY” manufactured by M/s STP Ltd or “WP Shield” manufactured by M/s Sika India Pvt Ltd or equivalent of M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited (e) Water proofing paint shall be by M/s STP Ltd or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited

S&F in repairs steel rolling shutters of 1.25 mm thick lath, without ball bearing and including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push & pull or manual type complete all as specified and as dirrected. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Steel Engineers / Sen-Harvic

Taking down steel rolling shutters of any description and of any size and refixing the same after carrying out repairs, oiling and greasing and including replacing with new guide channels and weldings etc. complete all as specified and directed. Note: Rates for spare parts like bearing, tension spring / gear operated lever and shaft are included in the quoted rates.

M&L making good broken / damaged RCC chajjas with PCC 1:2:4 type B1 or cement mortar 1:3 and including rendering 15 mm thick in CM 1:4 mixed with water proofing compound as per manufacturer's instruction to top, sides and soffits, including necessary scaffolding, formwork upto 3 storey height complete all as specified and directed. Note:- Water proofing compound shall be measured and paid seperately

M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 including demolition complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling, chajja, soffits etc, and finished even and smooth without using extra cement and including taking down complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement and including taking down complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement and including taking down complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited / M/s IWL Limited

M&L preparation of new plastered ceiling surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and including applying one coat of synthetic enamel paint complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L machine cut kota stone flooring 20 mm (minimum) thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including rubbing and polishing and laid over 20 mm thick screed bed in CM 1:6 and dismantling complete all as specified and directed.

M&L 16-18 mm thick granite (of any type) tiles machine cut, bedded over & including 20 mm thick screed bed in CM 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and demolition complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd

All as per Sl item No 18 above but in skirting / dado etc. laid over and including screed bed 10 mm thick in CM 1:3.

M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd

M&L PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Taking down & dismantling ceiling fan of 1200 mm sweep & re-winding of stator with super enamelled copper winding wire of existing guage, supply & replacement of ball bearing and insulating material, including heat varnishing, greasing, lubricating, re-assembling, and spray painting complete fan with approved colour, re-fixing the same and making electrical connection with three core PVC insulated unsheathed flexible cord of 1 Sqmm copper conductor complete all as specified and directed. Note :- Supply of Ball bearing of suitable size, lubricants etc, is deemed to be included in quoted rate. Make of bearing :- Tata / SKF / NBC Make of paint :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

All as per item No. 22 above but 1400 mm sweep.

Taking down & dismantling exhaust fan of 250 to 300 mm sweep & re-winding of stator with super enamelled copper winding wire of existing guage, supply & replacement of ball bearing and insulating material, including heat varnishing, greasing, lubricating, re-assembling, and spray painting complete fan with approved colour, re-fixing the same and making electrical connection with three core PVC insulated unsheathed flexible cord of 1 Sqmm copper conductor complete all as specified and directed. Note :- Supply of Ball bearing of suitable size, lubricants etc, is deemed to be included in quoted rate. Make of bearing :- Tata / SKF / NBC Make of paint :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

All as per item No. 24 above but 380 to 450 mm sweep.

S&F fan capacitor 2.50 mfd, electrolytic type suitable for ceiling fan including taking down complete all as specified and directed.

S&F mild steel down rod 1/2” dia (minimum) & 300 mm length including hanging clamp with nut, bolt and rubber suitable for ceiling fan of 1200 / 1400 mm sweep including taking down complete all as specified and as directed.

Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.

Taking down existing XLPE Cable of size 10 sqmm to 150 sqmm in underground / alongwith pole or in any positon, removing materials to store for keeping in safe custody or for taking credit complete all as specified and as directed. Note:- Excavation and earthwork (if required) shall be measured and paid seperately.

Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 10 Sqmm x 4 Core, laid in trenches / duct / on pole complete all as specified and directed. Make :- Havells / KEI / Polycab

All as per Sl. Item No. 30 above but 16 sqmm x 4 Core

All as per Sl item No. 30 above but 35 sqmm x 3.5 core.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.

Supply & laying sub class 'B' bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.

S&F 15 mm bore galvanised steel tubing, light grade with necessary fittings fixed along electric pole etc, for cable protection including taking down complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

S&F 80 mm bore galvanised steel tubing, light grade with necessary fittings, laid under road crossing, for cable protection including taking down complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

Boring holes horizontally under road, manually, in soft / loose soil, without cutting / disturbing the existing road surface, suitable for inserting pipe of n exc. 80 mm bore at a depth 0.75 m to 1.0 m from road surface for passing of UG cable, getting out and disposal of soil to a distance not exceeding 50 m complete all as specified and as directed. Note:- GI Pipe shall be measured and paid separately.

S&F street light junction box made from CPRI approved factory having size 200 (Width) x 150 (Depth) x 250 (Height) mm (minimum dimensions) made out of 2.00 mm thick CRCA sheet, duly powder coated of approved shade over a coat of red oxide primer both internally and externally, with rain shed all side except back side, comprising of 04 nos copper bus-bar of size 20 x 4 mm mounted on suitable size spacer insulators, necessary cable entry / exit holes for upto 35 sqmm cables, nut-bolts, MS clamps of suitable size for fixing including dismantling complete all as specified & as directed.

S&F in repairs 6 KW, single phase, automatic street light control panel with and including digital timer switch for automatic switching on / off street light as per set time through programmable 24 hour switch, 32A, TP power contactor, 40A SPN MCB, wall / floor mountable, IP 54 (dust and vermin proof) enclosure made out of CRCA sheet duly powder coated, conforming to IS/IEC 60954-4-1, in-built- short circuit protection, locking arrangement with padlock and panel lock complete all as specified and directed. Make:- Havells / GE / Kakatiya energy system Pvt Ltd

S&F FRLS PVC insulated 3 core multistranded sheathed cable with 1.5 Sqmm copper conductor for connection of street / security light etc, including taking down complete all as specified and directed. Make:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL

S&F LED street / security light fitting 1 x 60 watt, IP-66 (minimum), IK-07 with luminous efficacy 120 Lumen/watt (minimum), 10 KV Surge Voltage protection, operating voltage 140V - 270V, integrated type with high efficiency electronic driver, pressure die cast aluminium housing with toughened glass cover, internally prewired and including electrically connecting with twin core twisting flexible cord of 0.75 sqmm copper conductor cable including all other necessary fixing accessories such as GI pipe light grade of 40 mm bore (or higher size as per manufacturer recommendation) & suitable length with MS flat iron clamps (clamps shall be 40 x 5 mm MS flat), nuts, bolts & washers including painting to GI pipe & clamps with two coat of aluminium paint over a coat of red oxide primer & taking down complete all as directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells

All as per Sl. Item No. 44 above but 1 x 90 Watt LED street / security light fitting.

S&F 100 watt LED flood light fitting, IP-66 (minimum), IK-07 with luminous efficacy 120 Lumen/watt (minimum), 10 KV Surge Voltage protection, operating voltage 140V - 270V, pressure die cast aluminium housing, internally prewired and including electrically connecting & all other necessary fixing accessories such as 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers including painting to clamps with two coat of aluminium paint over a coat of red oxide primer & taking down complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells

S&F in repairs 40 W solar LED street light Integrated type (all in one system), 6000-6500K colour temperature, 120 Lumen/Watt efficacy, IP-65, CRI 70 (minimum) with and including in-built Monocrystalline solar panel (65 to 80 watt), 12.8V, Lithium Ferro Phosphate (LiFePO4) battery, MPPT Charge Controller (with minimum efficiency 90%) and PIR Sensor, operating temperature range 0°C to +45°C, charging time 1 day and autonomy 2 days with dimming, fixing accessories like clamps of suitable size etc complete all as specified and directed. Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready Industries India Ltd. / Havells

M/s TALCO

R N SAH N CO

D K SARKAR

Jagatbandhu Enterprises

DEBABROTA ROY CHOWDHURY

M/S B B CONSTRUCTION

M/S CHOWDHURY ENTERPRISES