Restoration of Electric supply (HT 11 KV) for Hasting line at Varanasi Cantt

Amount

M&L for arrangement/hiring of HT Fault locator machine including all T&P and accessories for maggering/applying high voltage to locate the Fault at site all as specified and directed. 2 Job

M&L for taking out old unserviceable HT cable from trenches and Supply laying testing and commissioning in pipes/ducts/poles/trenches under floor/under road XLPE insulated cable screened PVC insulated heavy duty with aluminium conductor, 11000 Volt grade (earthed) of cross section area 95 Sqmm, 3 Core completed all as specified & directed. 140 RM

Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of 95 sqmm 3 core. 01 Each

Cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of 95 Sqmm 3 core. 01 Each

Excavation in trenches/pits in any type of soil (soft/loose/hard/dense) not exceeding 1.5m wide and not exceeding 1.5m deep and getting out complete all as specified and directed. 15 Cum

Returning, filling in with the earth obtained from item No 01 here-in-before including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. 10 Cum

Removal of surplus excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 5 Cum

M&L for clean and dry sand (unwashed) in trenches around the cable for cushioning complete all as specified & directed. 5.27 Cum. Note : Sand cushioning 8 cm before laying the cable and 15cm after laying the cable & punned down 18cm and punned thickness shall be measured and paid.

Supply and laying Sub Class ‘B’ bricks (Old size) laid flat in trenches as cable covers complete all as specified & directed. 565 Each

M&L for Half round clamp made out of not less than 3.00 mm thick MS flat iron suitable for fixing on wall 100 mm dia HDPE pipe including Anchor bolt all as specified and directed by Engineer-in-Charge. 20 Each

M&L for laying / ixing on wall with clamp/inserting in bore hole HDPE pipe PN 6 of 100mm dia including all fitting as required at site. 60 RM

TECH-NIG COMPUTERS

V K ENTERPRISES

comondo security agencies

SHUBHAM CONTRACTOR