REWEAVING / RECANNING OF FURNITURE AT FURNITURE YARD OF JAIPUR MIL STN

Amount

Chair Dining (1.01 to 1.06) : Removing of unseviceable part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed . Drg No FD 228, 262, 270 & 279.

Stiffener

Front/Side/ rear rail

Back Support

Front leg

Rear leg

PVC Shoes

Chair writing (2.01 to 2.6) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drg No FD 280

Stiffener

Front/Side/ rear rail

Back Support

Front leg

Rear leg

PVC Shoes

Chair easy (3.01 to 3.04) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drg No FD 201 & 229

Front/rear leg

Front/Side/ rear rail

Hand rest

PVC Shoe

Stool dressing CB (4.01 to 4.06) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drg No FD 252 & 282

Centre stiffener

Side stiffener

Front/ rear rail

Side rail

PVC Shoe

M&L preparation of wooden surfaces of following furniture articles by cleaning, scrapping through electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture including minor repair of tightening with fevicol/bamboo pins/ screws/nails before polishing complete all as specified and directed.

Chair dining wooden. Drg No FD 228 & 262

Chair writing wooden. Drg No FD 280

Chair easy wooden. Drg No FD 201 & 229

Stool dressing CB. Drg No FD 252 & 282

Bin soil linen. Drg No FD 212 & 244

Chair Varandah Drg No FD 259/359

M&L Re-canning of following furniture articles with plastic cane of ½ round 2.0mm wide & 0.40mm thick, woven in Godrej pattern and border around and back with 4mm wide of approved quality (white/cream in colour) including removing of old canning.

Chair dining wooden. Drg No FD 228, 262, 270 & 279

Chair writing wooden. Drg No FD 280.

Chair easy seat only. Drg No FD 201 & 229

Chair easy back only. Drg No FD 201 & 229

Stool dressing CB. Drg No FD 252 & 282

Bin soil linen. Drg No FD 212 & 244

Chair Varandah Drg No FD 259/359

M&L Reweaving of chair varandah with nylon newar 50-55mm white colour superiour quality as aproved by Engr-in-charge including taking out old unserviceable newar complete all as specified and directed FD-259/359

Charpoy GI pipe Drg No FD 220

Tightening of elbow, check nut, removing of unserviceable nylon newar and M&L reweaving of charpoy GI pipe with 50mm to 55mm wide non recycled nylon newar of light colour, closely woven both side.Weight of newar shall not less than 1.50 Kgs per charpoy as directed by Engr-in-charge.

Removing of old long rail of Charpoy GI Pipe and supply and fix new long rail of 32mm dia GI pipe medium grade duly threaded both sides as required. Note : 1. Old long rail as retrieved shall be used for converting short rail under item No 8.03 and charges for conversion shall be included in unit rate of item No 8.03 here-in-after. 2. GI pipe shall be arrange by the contractor and pipe shall be ISI marked.

Conversion of long rails of Charpoy GI Pipe (retrieved under item No 8.02) into short rail by cutting/finishing to shape and threading and replacing the same as required against unserviceable short rail. Note : Old short rail retrieved shall be used for converting the leg under item No 8.04 and charges for conversion shall be included in the unit rate of item No 8.04 here-in-after.

Conversion of short rails of Charpoy GI Pipe (retrieved under item No 8.03) into leg by cutting/finishing to shape and threading and replacing the same as required against unserviceable leg.

Removing old elbow from Charpoy GI Pipe and S&F 32mm bore medium grade GI elbow, 3 ways ISI marked complete all as directed.

Removing old check nut from Charpoy GI Pipe and S&F new check nut 32mm bore, 6mm thick galvanised iron medium grade complete all as directed.

Schedule of Credit

F.M. KHAN SONS

AJAY TRADERS

B.S Constructions

L.BHIMSEN