Item 4 Construction and Development for Fountain Square Upper Fountain and Finishes of both fountain areas Mansarovar Jaipur

Amount

PART-C "NON BSR "

Shortblasted paver blocks "i" shape, "wave " shape, "rectangular" shape, "square "shape ,60mm thick, for colour paver inclusive of material cost,tax, tranportation and unloading.(rate-rs. 1350/m2) considering cement mortar(1:4)

Providing & fixing fine dressed machine cut sand stone Stone steps (Treads & risers) with round nising fixing in Cement mortar 1:2 (50mm to 60mm thick)

Providing and fixing 18 mm thick Black Granite stone slab shot blasted flammed brushed and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete

Providing and fixing 30 mm thick Black Granite stone slab shot blasted flammed brushed and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete

Providing and fixing Cast Iron Railling complete as per design and drawing including casting, grinding and fixing complete in all respect as directed by engineer incharge.

Providing and Installation of Water Cooler for storage capacity 150 liters with normal cooling capacity 150 liters per hr including 3 nos. of faucets and approximately Hundred kg weight of Blue Star or equivalent complete in all respect as per Direction of Engineer in charge .

Providing and Fixing Cast Iron Fountain of 4.42 Mtr Height With First Layer plate of 3.20 mtr dia, and second layer plate of 2.10 mtr dia including all carving work as per design, complete all as Engineer in charge.

Providing and fixing of Glass mosiac tiles ( Vitro Series Random Mix) of ITALIA or equivalent make of size 20 X 20 mm, 4 mm thick over smooth cement plaster with 252 MYK Laticrete adhesive of 1.5 mm beding and epoxy grout of MYK laticrete or equivalent make complete as per manufectures specifications and direction of EI

Providing and fixing of Glass mosiac tiles ( Vitro Series -Mural design ) of ITALIA or equivalent make of size 20 X 20 mm, 4 mm thick over smooth cement plaster with 252 MYK Laticrete adhesive of 1.5 mm beding and epoxy grout of MYK laticrete or equivalent make complete as per manufectures specifications and direction of EI

Providing and laying Single component crack bridging high elongation Polyurethane (PU) waterproofing coating, after the surface should be properly prepared and devoid of any impurities. (To prepare the surface wire brush, hair brush, hammers and blower machine will be used) The surface should be pre-wetted and no dry areas lefts. Treat all the joints and corners by making gola with cement1: 3 sand: SBR with water. Pack all drain holes. Any cracks on surface will cut in V shape grove and filled with SBR, up to 10 mm in depth and 10-20 mm in width. Cleaning of surface and make it dusts free and then Apply 1st primer coat of or MYK Arment SBR 35. Apply 3rd, 4th and 5th coat of PU primer coat of MYK Arment and allow it to dry for at least 5 hours. Pond tests the surface for 72 hours. All complete with standard specification and under Engineer in charge

Providing and fixing Acid/Alkali Resistant Proof Red Mandana Sand Stone for copping Size 1800mm to 2700mm x 600 mm, Thickness 40mm, Edges Uncut, Top Polished & Bottom Sawn over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI.

Providing, Carving and fixing Granite Moulding of approved stone and shed to be fixed on curved surface of fountains outer Periphery as per detailed drawing with exelent workmanship and finishesh complete as per direction of EI.

PART-D "NON BSR Electrical Work "

Internal Wiring Supply, installation, connection, testing & commissioning of following outlet points as per Specification & IS. The unit rate for the point shall consist of the circuit wiring from LDB or switch board to outlet point through MCB / switch as required & including the outlet points with connector & sockets as per specification. All the wiring, outlet points shall be done in a surface / concealed manner with ISI approved medium duty, rigid FR PVC, ISI conduit of minimum 25 mm. dia. using 650 V FRLS copper conductor wire, modular switches with suitable plate, PVC / Metal back box with brass chromium / cadmium plated machine screws etc. Point Wiring Wiring for the following light points with 3nos. 1.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 6 amps single pole rocker operated flush mounted switch of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling.

Short point upto 3.0 mtrs. From tapping point to outlet via switch

Medium point above 3.0 mtrs. Upto 6.0 mtrs. tapping point to outlet via switch

long point above 6.0 mtrs. Upto 10.0 mtrs. tapping point to outlet via switch

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & eirthwire of 1.5 sq.mm (green) both are of .ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6A Modular type switches and following type of accessories erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling. Primary light point controlled by two, two way 6 A switch

Wiring for the 250 volts single phase and neutral 6 amps switched socket outlet with 2.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted in 25 mm dia medium gauge PVC Conduit including providing and fixing of 6 amps 5 pin switch socket outlet of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. One 6 A x 5 pin 250 Volt socket outlet point controlled by one 6 A switch located on board.

Short point Upto 3.0 mtrs.

Medium point above 3.0 mtrs. Upto 6.0 mtrs.

long point above 6.0 mtrs. Upto 10.0 mtrs.

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection. 2) For erecting concealed in RCC / Brick wall/slab along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness

Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness

MAINS : ( not for Point wiring ) Supplying and Laying of mains with Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V with earth wires of Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in Suitable dia rigid PVC Pipe of Heavy Gauge ( Scope Also includes Supply of with. ) Supplying and Laying of 4 nos. of 10 sq mm Cu. FRLS flexible wires with 2 nos 4 sqmm Cu. FRLS flexible wires to be drawn in 2 nos. of 40 mm dia Pipe

Supplying and Laying of 4 nos. of 6 sq mm Cu. FRLS flexible wires with 2 nos 2.5 sqmm Cu. FRLS flexible wires to be drawn in 2 nos. of 40 mm dia Pipe

Supplying and Laying of 2 nos. of 10 sq mm Cu. FRLS flexible wires with 1 nos 4 sqmm Cu. FRLS flexible wires to be drawn in 40 mm dia Pipe

Supplying and Laying of 2 nos. of 6 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS flexible wires to be drawn in 40 mm dia Pipe

Supplying and Laying of 2 nos. of 4 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS flexible wires to be drawn in 25 mm dia Pipe

Supplying and Laying of 2 nos. of 2.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS flexible wires to be drawn in 25 mm dia Pipe

Supplying and Laying of 2 nos. of 1.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS flexible wires to be drawn in 25 mm dia Pipe

Supply & Laying of 1.5 sq mm x 3 core round flexible wire in Prelaid pipe / Raceway.

Supply & Laying of 2.5 sq mm x 3 core round flexible wires in Prelaid pipe / Raceway.

Distribution Board Supply, Assembling, grouting, leveling Connecting & testing D.B of IP 43 of specified make. Distribution Board-VTPN Supply, Erecting, testing and commissioning of only VTPN D.B. with space for FPMCCB / FPMCB as incoming and 12 TPMCB / SPMCB as outgoing per phase (i.e. 12 way VTPN D.B.) of Legrand Make Cat. No. 607752

Supply, Erecting, testing and commissioning of only VTPN D.B. with space for FPMCCB / FPMCB as incoming and 8 TPMCB / SPMCB as outgoing per phase (i.e. 8 way VTPN D.B.) of Legrand Make Cat. No. 607751

Distribution Board-TPN Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 8 SPMCB as outgoing per phase (i.e. 12 way per phase D.B.) of Hensel Make KV9448M

Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 4 SPMCB as outgoing per phase (i.e. 8 way per phase D.B.) of Hensel Make KV9336M

Distribution Board-SPN Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as incoming and 12 SPMCB as outgoing per phase (i.e. 16 way D.B.) of Hensel Make KV9118M

Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as incoming and 8 SPMCB as outgoing per phase (i.e. 12 way D.B.) of Hensel Make KV9112M

Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as incoming and 4 SPMCB as outgoing per phase (i.e. 8 way D.B.) of Hensel Make KV7109M

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed.

Supply of Additional fan rod made out of 10 gauge painted GI pipe with all required accessories for fan suspension.

Exhaust Fans : SITC of light duty propeller 225mm dia exhaust fans

Earthing Providing and laying of following tined copper / GI plate electrode, with 2 Nos 50 x 6 mm copper strips from earth plate electrode to inspection chamber, 50 mm dia medium class GI pipe, CI funnel with 20 gauge GI wire mesh, masonry chamber 1000 x 500 mm with concrete base C I heavy duty / chequered plate manhole cover with frame painted with bitumastic paint and packing with mixture of charcoal and common salt around plate electrode including digging of pit up to permanent moisture level and as per soil condition but not less than 3 meters and back filling as required. 600 x 600 x 3.15 mm cu.plate

Providing & doing earthing electrode for equipment earthing as specified in IS:3043 - 1987 for equipment complete with : Earthing Electrode Cu. , 50 MM. Dia 3 Mtr. Long. ( LPI Make ) Contractor is responsible to achieve the Earthing Resistance less than 1 Ohm.

Earth wire/strips : Supply and laying cu. earthing strips for interconnecting the earthing stations, panels, DB's etc. in built up trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with : fixing accessories Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. Providing and erecting HOT deep Galvanized strip or G.I. wire 8 to 16 S.W.G.

25 x 3 mm cu. Tape

No.8 gauge bare cu. earth wire

Earth Link : 50mm x 6 mm earth link fixed by necessary screws on wall. ( 1 mtr Long )

Internal Wiring Supply, installation, connection, testing & commissioning of following outlet points as per Specification & IS. The unit rate for the point shall consist of the circuit wiring from LDB or switch board to outlet point through MCB / switch as required & including the outlet points with connector & sockets as per specification. All the wiring, outlet points shall be done in a surface / concealed manner with ISI approved medium duty, rigid FR PVC, ISI conduit of minimum 25 mm. dia. using 650 V FRLS copper conductor wire, modular switches with suitable plate, PVC / Metal back box with brass chromium / cadmium plated machine screws etc. Point Wiring Wiring for the following light points with 3nos. 1.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 6 amps single pole rocker operated flush mounted switch of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling.

(B)50 mm dia

(B)90 mm dia

(C)120 mm dia.

Wiring for the light points as above but with IP66 Switch board with IP 66 Box and 6 Amp / 16 amp Switch. 250 Volt one 6 A IP66 switch located on IP 66 box board of Legrand cat. No. 673000 & 684638 or SCAME make

Primary light point controlled by one SP MCB ( Same as above item but controlling with SP MCB )

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal/ PVC box covered with 3 mm thick laminated sheet for concealed wiring.

Wiring for the 250 volts single phase and neutral 16 amps switched socket outlet with 2.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 16 amps 5 pin switch socket outlet of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

DO - as 1.1.6 but with4 sq.mm wire for phase & Neutral & 2.5 sq. mm for Earthing

Wiring for the Three phase and neutral 32 amps polycarbonate industrial 5 pin (IP 65/66) socket outlet with 32 amps Four pole MCB in a poly carbonate enclosure with 4 x 6 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 50 mm dia medium gauge PVC Conduit including providing and fixing of 32 amps socket in poly carbonate enclosure and neutral & earthing pin of the socket and with FP MCB of approved quality color make & design in 2 mm thick GI box / polycarbonate enclosure and earthing of fixtures and the outlet box with 2 nos. of 2.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

Wiring for the Single phase and neutral 32 amps polycarbonate industrial 3 pin (IP 65/66) socket outlet with 32 amps Double pole MCB in a poly carbonate enclosure with 2 x 6 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 32 amps socket in poly carbonate enclosure and neutral & earthing pin of the socket and with DP MCB of approved quality color make & design in 2 mm thick GI box / polycarbonate enclosure and earthing of fixtures and the outlet box with 2 nos. of 2.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

Supply & Laying of 4 sq mm x 4 core round flexible wires in Prelaid pipe / Raceway.

Dual Channel Timer equivalent to Theben Make TR612 TOP

20 Amp DP Din rail Mounted Contactor Equivalent to MDS make Cat. No. 004049

40 Amp DP Din rail Mounted Contactor Equivalent to MDS make Cat. No. 004068

Distribution Board-TPN Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 12 SPMCB as outgoing per phase (i.e. 16 way per phase D.B.) of Hensel Make KV9354M

125 Amp. MCCB ( 16 KA ) with the Enclosure & Both Side Cable end Box with the Handle with Spreader Link with On off Indicating Lamp

Light Fixtures & Fans Installation, Testing & Commissioning of any kind of Light Fixtures with all necessary Lamps, Ballast etc.. Complete in all Respect Contractor has to install the fitting as per architect / Consultants final approval. 1 x 28 W type light fixture with 28W lamp of Philips make TWG 207 / 1 x TL5 28W Adreno V2 or GE make

1 x 11 watt mirolta type light fixture with lamp equivalent to Philips make FMS200/111 or GE make

SITC of IP67 & IK10 LED Ground Burial of 16W. Beam Angle : 12D. Luminaire should be made of pressure die cast alumunium. Similar to Philips BBP330 or equivalent from approved makes.

SITC of IP65 LED Rope Light 8 watt per meter with all accessories and Control gear complete in all respect

SITC of IP67 - IK09 inground, walkover 14 Watt T5 linear with Reflector ( as specified by Architect ), Housing made from Die cast / extrusion Alluminium with toughned Glass with all necessary lamp, Control gear, all accessories etc.. Complete in all Respect of Ligman make or Reiss make or Simes make

IP 67 - 16 watt PCB Mounted LED Strip 4 ( Aluminium Extruded Batten with reflector / cover on top) Module with all necessary Ballast, Transformer, wiring up to the Light Point, with all necessary fixing accessory of Philips, Osram or VIN make

SITC of Water Tight Junction Box of Hensel make Cat. No. KG9003IN or equivalent. With necessary clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be with the Water tight Glands only )

SITC of Water Tight Junction Box of Hensel make Cat. No. KG9003IN ( For Poles ) / KF 9500 ( For Others ) or equivalent. With necessary clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be with the Water tight Glands only )

SITC of IP66 Water Tight Junction Box 139mm x 115mm x 70mm With necessary clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be with the Water tight IP 66 Polyamide Glands, open Holes should be sealed with the IP65 Grommets only ) J. B. Should be provided with Hensel make cable connectors to connect 1 nos. of 6/10 sq. mm. x 4 core cables+ 4-5 nos. of 4 sq. mm x 4 core wires + Earthing wires. of Hensel make cat. no. KD5065 + Connectors + IP65 Glands + IP65 Grommets

SITC of IP68 water tight cast resin junction box 140mm x 109mm with necessary accessories like funnel,ventilation seals and disposable gloves, connector of Splesberg Abox GT 100-10 or Hensel make

Miscellaneous Supplying & Erecting conventional type Carbon Dioxide fire extinguishers of ISI approved of 4.5 kgs

Supplying & Erecting automatic emergency light with maintenance free battery for 20 watts tube.

Providing and erecting danger notice board for medium voltage installation to be erected as per I.S. The board should be 150 x 150 mm.

Providing printed instruction chart both in English & REGIONAL LANGUAGE & duly framed out on glass for treatment of person suffering from Electric shock.

Supplying , fabricating and installation of various sizes MS race way / junction boxes/clamps/hangers for Cable Tray, Light Fixture made out of specified size sheet/Angle/Flat/rod/ channel etc as per design with all necessary accessories like bend, junction boxes, coupler, Anchor fastener, Bolt Nuts, etc.. & work from MS structure for other work with anchor fastener of Hilti make and necessary hardware with necessary welding has to be done to complete the job from ISA / ISMC / PLATE. The job also includes to paint the structure with two coats of red oxide and two coats color of enamel paint as approved and recommended by consultant. Complete in all respect to be installed at any height with all necessary arrangements. Contractor has to complete the work up to satisfaction of Consultant

Supplying , fabricating and installation of various sizes made from SS 316 grade / Fitting covering Jali / race way / junction boxes/clamps/hangers for Cable Tray, Light Fixture made out of specified size sheet/Angle/Flat/rod/ channel etc as per design with all necessary accessories like bend, junction boxes, coupler, Anchor fastener, Bolt Nuts, etc.. & work from MS structure for other work with anchor fastener of Hilti make and necessary hardware with necessary welding has to be done to complete the job from ISA / ISMC / PLATE. Complete in all respect to be installed at any height with all necessary arrangements. Contractor has to complete the work up to satisfaction of Consultant

Manhole Construction of brick masonry pulling chamber 450 mm x 450 mm inside clear size and depth up to 0.6 meter with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum 200 mm thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame and 450 mm dia cover of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & clearing the site by removing debris & Shifting of the debris & making site good As per the Instruction of the Engineer In charge complete in all respect.

Construction of brick masonry pulling chamber 600 mm x 600 mm inside clear size and depth up to 0.60 meter with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum 200 mm thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame and 600 mm dia cover of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & clearing the site by removing debris & Shifting of the debris & making site good As per the Instruction of the Engineer In charge complete in all respect.

Bidder Name

Amount

Kumawat Contractors(GSTN-08AABFK8231C1ZO)

bhorilal mohanlal(GSTN-08AABFB2993G1ZG)

M/S Niraniya Construction Co(GSTN-NA)

bhorilal mohanlal

Kumawat Contractors

M/S Niraniya Construction Co

bhorilal mohanlal