PROVN OF PARKING SHED FOR 407 FD HOSPITAL AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) LUCKNOW

Amount

Demolition of brick work or stone boulder masonary built in cement mortar or cement lime mortar complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc to store and rubbish not exc. 50m complete all as specified and directed.

Excavation in post holes ( or similar holes) each notexc 0.50cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50mtr and making good surface in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in posts etc complete all as specified and directed.

M&L for mild steel work for posts including gusset plate of suitable size welded at both ends for anchoring and for fixing of purlin and rafter including special shaped washers etc complete all as specified and directed.

M&L for mild steel rolled section as in main and cross beams, hip and jack rafters, purlins where connnected to common rafters and running rails etc conf to Fe 410- W complete all as specified and directed.

M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with or without any attachment with riveted, bolted or welded attachment complete all as specified and directed.

M&L for mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St- 240 complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6mtr mean radius built in CM 1:4 complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for hardcore gauge not exc 63mm (using broken stone or boulders) deposited spread leveled in layer not exc 15mm thick watered and rammed to a true surface complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

S&F exterior coloured chequred tiles superior quality (glossy finish) 20-25mm thick of approved size/design/shade set and jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F reinforced concrete pipe class NP-2 of laid and jointed complete with collers of bore of pipe 450mm, complete all as specified and directed.

S&F UPVC pipe 75mm bore of quality SCH-40 complete all as specified and directed.

S&F 80mm thick M-40 Grade machine pressed precast concrete rubber moulded interlocking coloured paver block of any shape and size over and including 25mm thick sand cushioning complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of floor complete all as specified and directed.

M&L for 100mm thick PCC flooring 1:2:4 Type B-1 (using 20mm graded agg) laid in alternate panels over sub base as in floor of parking complete all as specified and directed.

M&L for 100mm thick PCC type D2 1:4:8 (40mm graded stone aggregate) as in sub base floor complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm grade stone aggregate as in coping, benching finished fair and even including necessary formwork complete all as specified and directed.

M&L for 30mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in floors, finished the surface even and rough complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for non skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including with motif/borders as in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles coloured in vertical surface 600x300x7-8mm thick set and jointed in neat cement slurry and pointed with white cement to match including with motif/borders as in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non skid coloured ceramic tiles, joint free 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors, over and including 15mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on stone masonry surface other than fair finished fair and even complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of wall finished even and smooth without using extra cemnt complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or on concrete surfaces in CM 1:6 finished fair and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer complete all as specified and directed.

S&F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed.

S&F factory made solid panel PVC door shutter 28 to 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement , supply and fixing in the frame complete all as specified and directed.

S&F for 100mm long, SS butt hinges, extruded, anodized and fixed, type B-21 complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized complete all as specified and directed.

S&F of aluminium alloy anodised sliding door bolt with hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

S&F steel windows or ventilators partly fixed and partly top hung with glazing bars complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10 cm width or girth over red oxide including necessary preparation complete all as specified and directed

S&F 3mm thick sheet glass pin headed and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified & directed.

S&F PVC low level 10 lit capacity valve less syphonic action type flushing cistern with inlet ball valve and handle including brackets complete all as specified and directed

S&F PVC connections of 15mm size with PTMT nuts of 600mm long complete all as specified and directed.

S&F vitreous china wash basin, white flat back size 580 x 450 mm including , Waste fittings, brass, chromium plated for glazed ware, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed to waste pipe including MS brackets complete all as specified and directed.

S&F vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ) including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, grating, unions for discharge pipe etc (excluding flushing cistern) complete as specified and directed.

S&F for 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly-nuts, screwed for iron pipes complete all as specified and directed.

S&F for brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified.

S&F for bib tap 15mm, chromium plated, fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed.

S&F stop/angle valves, 15mm chromium plated, fancy type, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 15mm dia, complete all as specified and directed.

S&F for superior quality CP towel rail 20 mm dia, 'D' Type 600mm long between flanges complete all as specified and directed.

S&F for toilet paper holder, brass chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F for CP soap dish, superior quality fixed to plugs with chromium plated (CP) brass screws complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws complete all as specified and directed.

S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet glass of size 300x300mm, fixed with CP brackets, complete all as specified and directed.

S&F Towel ring brass chromium plated with flange fixed on wall with PVC rawl plug & cadmium plated brass screws complete all as specified and directed.

M&L for 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in wall complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to trenches complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for 100 mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and directed.

S&F PVC (SWR) vent cowl suitable for 100mm bore of pipe complete all as specified and directed.

S&F grating dome 100mm dia of stainless steel complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm PTMT ball valve with polythene float and fly nut complete all as specified and directed.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

S&F for 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.

M&L for exterior floor tiles (superior quality) of size 300 x 300 x 10 to 12mm thick of approved colour and shade laid over and including 20mm thick screed bed in CM 1: 4 complete all as specified and as directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 75 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 75 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Serial Item No 75 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

S&F socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.

S&F switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC, Philips cat no TMC 501P1XT-LED22W P 3241

S&F in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Crompton/ Havells/ Philips/Bajaj

S&F ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 04 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make :-Legrand, Cat No. 5076 11 & 5079 13 or equivalent in Hager, Cat No : VYS04D & VYS04E or Schneider, Cat No : A9HSND04 & A9HSND074WB

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make :- Legrand, Cat No. 5076 11 & 5079 13 or equivalent in Hager, Cat No : VYS08D & VYS08E or Schneider, Cat No : A9HSND08 & A9HSND08WB.

S&F in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :-Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No : NCN106N to NCN132N or Schneider, Cat No : A9N1P06C to A9N1P32C.

S&F in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :-Legrand, Cat No. 4086 36 or equivalent in Hager, Cat No : NCN232N or Schneider, Cat No : A9N2P32C

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

Providing sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Supply and laying 50 mm bore galvanised steel tubes with all fittings, light grade laid in trenches for cable protection complete all as specified and directed.

Supply and laying common burned clay bricks sub class B designation of old size bricks complete all as specified and directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fix exhaust fans single phase 230/240 Volts heavy duty metalic body of size 300 mm sweep 1400 RPM ISI marked, and making connection with twisted copper flexible wire 23/0.076 mm all as specified and directed. Make/Model:- Havells Turbo Force SP / Almonard 300 mm Heavy Duty / Bajaj Maxx Air as approved by GE.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Shivam Enterprises

QUALITY CONSTRUCTIONS CO

M/S SWATI CONSTRUCTION

Sanjai sales and services