SPECIAL REPAIR TO INTERNAL ROADS OF JCO MD ACCN120 ENGR REGT AND NAR EKTA QTRS AT CME UNDER GE CME KIRKEE

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area exceeding 400 Sqm and depth exc 50mm and n exc 100mm complete and removing unserviceable material outside MD land complete all as specified and as directed.

M & L for 150mm thick (compacted thickness) WBM, with coarse aggregates using granite, trap or basalt stone of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to required gradient and camber using 8 to 10 tonne power roller complete all as specified and as directed.

All as per item No 2 above but except materials. Note: Serviceable material obtained from item No 1 shall be used under this item.

M& L for Moorum/red bajri filling in floors/road side berms or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

Rolling and consolidation formation of surface of road in cutting/ filling with power road roller exc 8 to 12 Tonne complete all as specified and directed.

M & L for repairs to pot holes any depth n,exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc, cutting around edges atleast 25mm in depth, making good by applying tack coat @ 5Kg per 10Sqm of paving bitumen (VG-10), putting in premix bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm of paving bitumen (VG-30), blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot holes exceeding 30mm complete all as specified and as directed.

M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly priming/tack coat with bituminous emulsion RS-1 @ 10 kg per 10 sqm complete all as specified and as directed. Make :- HINCOL or equivalent as approved by GE.

M & L for premixed bituminous macadam with binder content @ (VG-30) 4% by weight of total mix (Job Mix) laid / rolled with 8 to 12 tonne power roller and compacted to required gradient and camber (consolidated thickness 75 mm or less as per site requirement of site) laid/ rolled and compacted to required gradient and camber complete all as specified and directed.

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc complete all as specified and as directed.

M & L for applying a tack coat with bituminous emulsion RS-1 @ 5kg/10sqm with sprayer over bituminous macadam etc complete all as specified and directed Make :- HINCOL or equivalent as approved by GE.

M & L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed. Note :- (i) Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle Number.

M & L for preparation of new or previously treated road black top surfaces of road and applying 2.5 mm thick retro-reflective thermoplastic road marking paint @5kg/sqm, mixed with glass beads @250gm/sqm as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm width, by mechanical machine ie dispenser machine , white or golden yellow as per IRC pattern including cleaning of road surface free from dust & moisture complete all as specified and as directed. Make of paint : CMS Bombay / Shivalik Prime-Chandigarh / Ritco / Meerut / SN Industries-Delhi) as approved by GE

S&F in cat eyes duel directional Glass beads reflector body material ABS plastic size 117mmx117mmx23mm reflector 19 or 21 Bi convex glass element on each side compressive strength upto 35 tons. Colour body yellow colour with red reflector . Fixing by means of nail and epoxy fixing to roads by hammering complete all as specified and directed including taking down old unserviceable one Make : 3D/Dark eye/Automat or equivalent as approved by GE

S & F solar stud made out of casting, with 3 LEDs on each side, fixed with epoxy compound including cleaning of existing surface complete all as directed by Engineer-in-Charge including taking down old unserviceable one.

S&F tubular delineator made out of 100mm bore GI pipe medium grade with total height of 900mm, black colour powder coated,Hi intensity reflective taping at top and three bands of 25mm width white reflective tape on pipe. Metal jali to protect Hi density reflective taping and fixing with and including excavation in post holes in hard/dense soil , filling of mass concrete (1:4:8) type D2 using 20mm graded stone aggregate as in foundation (0.3mx0.3mx0.4m), removal of surplus soil and making good existing surfaces complete all as directed by Engineer in charge including taking down old unserviceable one.

M&L for RCC drain pipes 150mm , class NP-2 laid in trenches and jointed complete with collar all as specified inlcuding demolition of old pipe complete as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D-2 (40mm gde stone agg) as in concrete bed to RCC drain pipes including packing under and hunching against side of pipes with concrete after they are laid and join ted, dia of pipe 150mm complete as specified and directed by Engr-in-Charge.

S & F road safety Convex mirror model No OS-790 from OSCAR safety solutions or other equivalent approved make 80 CM dia, including fixing and anchoring complete all as directed by Engineer-in-Charge including taking down old unserviceable one.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L precast solid block masonry of block 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L 75 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directred

Supply only Fine aggregate (sand) for sand cousioning

M & L Machine pressed precast concrete interlocking pavour block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish colour shade complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick plastering on concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L Preparation of newly plastered or unplastered surfaces on wall surfaces and applying coat of primer and two coats of cement base paint complete all as specified.

M&L PCC 1:3:6 type C-1(Using 20mm graded crushed stone agg) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.

MOHANLAL MATHRANI CONS. PVT. LTD.

R K Enterprises