EE/O/Udt/LT 04/25-26 Dt.22.04.25

Amount

Plastering in CM 1:5, 12mm thick in for all round the building walls including cost of all materials, scaffolding charges, labout charges, curing, lead, lift, T&P etc., complete

Colour washing one coats with oil bound distember over existing colour washing including scrapping , cost of materials, lead, lift, labour etc., complete

Providing UPVC door: providing and fixing casement door fabricated from un-plasticized polyvinyl chloride sections profiles. The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4 mm. The wndow unit should be designed with all corner, joints nitred and fusion welded. Window should be steel reinforced with 25 x 24 x 25 mm steel reinforcement with a thickness of 1 mm to have dimentional stablility. The Sash should be of 60 x 74 mm. The profiles should have Co-extruded seals. All the hardware like Friction stays, handles should be scrud with self tapping screws. The window system should be glazed with 5 mm plain float glass / 6 mm Bison lam. The profile should be cut to length and welded 45 degrees. The window should be designed such that the water drinage does not pass through the reinforcement champer. The windows system should be fixed directly to the plastered brick wall using self expanding Nylon plug and Driving MS Electro platted screws into plug.

Plainting the steel work with 2 coats of approved quality color satin / matt finished enamel paint over a coat of primer of Red oxyed including cost of all materials , brushes, lead, lift, etc. complete

Wiring with 2 x 2.5 sq.mm PVC insulated SC and Un-shelttered cu.units Conductor cable of 1100 V grade in suitable heavy gauge PVC riggid pipe on wall and Ceiling with PVC accessories with TW switch box and 5 Amps F.Tswitch with painting of suitable color with continuous earth wire connection of 14 SWG TC fuse wire for open PVC light point / Fan point

Wiring with 2 x 4 sq.mm PVC insulated SC and Un-shelttered copper conductor cable of 1100 V grade in suitable PVC riggid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150 x 00 x 113 mm TW switch box with 3 mm thick hylum sheet cover for 15 A three pin Non-inter locking CS plug with Continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable color for concealed PVC plug point including cost of materials such as cables, pipes, labour, lead, etc. complete

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only for Tamil Nadu Contractor. If the contractor is outside Tamil Nadu may be quoted as "0" only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only for Tamil Nadu Contractor. If the contractor is outside Tamil Nadu may be quoted as "0" only

Inter-state GST to be quoted in percentage (value alone) Ex. 18%, it should be entered as 18 only for other than Tamil Nadu contractor. If the contractor is within Tamil Nadu may be quoted as "0" only