Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
5 Oct 2026, 10:30 am
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
RDSO
Expenditure
General
78
1 condition
(i) Supply to be as per tender specification. (ii) Bidder should be Approved / Developmental vendor as per IREPS Vendor Directory for RDSO item ID: 3100249 Sub ID: 003 (iii) Railway reserves the right to purchase Bulk Quantity from those sources who have been approved by RDSO for the item on or before the date of tender opening. But in case of removal or suspension or banning or degradation after opening the tender, such cases will be taken into account while deciding tender ( for details regarding ordering on Approved / Developmental vendors please refer para 3.2 & 3.3 of Part B tender conditions)
17 conditions
(i) In case of road delivery, the date of delivery at destination (Consignees end) shall only be treated as delivery date irrespective of F.O.R./F.O.T. condition mentioned elsewhere in the contract/tender. (ii) The bidder confirms that rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. (iii) (a) Regarding MSE purchase preference firms, please refer clause 15.0 part B of Southern Railway tender conditions available under the link Public Documents- >Stores/Supply. (b) Goods and service Tax: Please refer part A Para 14.0 of Southern Railway tender conditions available under the link Public Document -> Stores/Supply. (d) Tenderers are advised to refer instructions to tenders (Part A) and Tender conditions (Part B) for other terms and conditions available under the link Public Document -> Stores/Supply.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i). Offer validity should be minimum 60 days. (ii). Firms with MSME/NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. (iii). Tenderer should mention GST No of their firm and also HSN Code .
1 location across Tamil Nadu · 19,700 Numbers total
Hex. Socket Head Cap screw
78266357A~SR
78266357A
Limited - Indigenous
Goods
Tamil Nadu
₹0
Exempted
22 Sept 2026
22 Sept 2026
25 items · 19,700 Numbers total
Hex. Head Screw M24x100 - 10.9 (HT) for LHB/FIAT Bogie to Specn. No. IS:1364 (Pt.2)/2 023, IS:1367 (Pt.3)/2017, CE Coating as per RCF/MDTS - 057. Item to be procured from RDSO approve d sources of Axle End Cap Screws [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 800.00 Numbers |
| Total | 800 Numbers | |
HEX. HEAD BOLT M16X90 - 10.9 (HT) FOR LHB/FIAT BOGIE. ITEM SHOULD BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS. AS PER SPECN.NO. IS:13 64 (Pt.1) 2023, IS:1367 (Pt.3) 2017, CE COATING TO AS PER MDTS 057 [ Warranty Period: 30 Month s after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 800.00 Numbers |
| Total | 800 Numbers | |
Hex. Socket Head Cap screw M12 X 60-12.9 (HT) for LHB/FIAT Bogie. Item should be pro cured from RDSO approved sources of Axle End High Tensile Cap Screws to Specn.No. IS:2269/2006 ( RA-2021) , CE Coating to as per MDTS 057 [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 200.00 Numbers |
| Total | 200 Numbers | |
Hex. Head Bolt M20x100 - 10.9 (HT) for LHB/FIAT Bogie. to Specn. No. IS:1364 (Pt-1) 20 23, Specn. IS:1367 (Pt.3) 2017 CE Coating as per RCF/MDTS-057. Item should be procured from RDSO approved sources of Axle End High Tensile Cap Screw [ Warranty Period: 30 Months after the date o f delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 1600.00 Numbers |
| Total | 1,600 Numbers | |
HEX HEAD SCREW M16 X 50-10.9(HT) TO SPECN.IS:1364(Pt.2)/2023 IS:1367(Pt.3)/2017 CE COATING AS PER RCF/MDTS-057 Rev. Nil. ITEM SHOULD BE PROCURED FROM RDSO APPROVED SO URCES OF AXLE END HIGH TENSILE CAP SCREWS [ Warranty Period: 30 Months after the date of deli very ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX NUT M12-10 PREVAILING TORQUE TYPE TO SPECN. DIN6925/DIN 980V,IS:1367(PT.8 )2020 A3B of IS:1367(Pt.11)2020. Item should be Procured from RDSO Approved Sources of Axle End High Tensile Cap Screws. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 1400.00 Numbers |
| Total | 1,400 Numbers | |
HEX NUT M8-10 PREVAILING TORQUE TYPE TO SPECN.DIN6925/DIN 980V, IS:1367(PT.8) 2020, A3B of IS:1367 (Pt.11)2020. ITEM SHOULD BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 800.00 Numbers |
| Total | 800 Numbers | |
HEX NUT M20-10 PREVAILING TORQUE TYPE TO SPECN. DIN6925/DIN 980V, IS:1367(PT. 8)2020, A3B of IS:1367(Pt.11)2020. ITEM SHOULD BE PROCURED FROM RDSO APPROVED SOURCES O F AXLE END HIGH TENSILE CAP SCREWS. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX HEAD BOLT M12 X 100 - 10.9 (HT) AS PER SPECN. NO. IS:1364(Pt.1)/ 2023, IS:1367 (Pt.3)/ 2017 & CE COATING AS PER RCF/MDTS-057 REV. NIL AND THE ITEM SHOULD BE PROCURED FR OM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS [ Warranty Period: 30 Mo nths after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX HEAD BOLT M16 X 65-10.9 (HT) TO SPECN.IS:1364(pt.1) 2023, IS:1367(Pt.3) 2017 & RCF/MDTS-057 Rev.Nil. ITEM SHOULD BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE EN D HIGH TENSILE CAP SCREWS. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 300.00 Numbers |
| Total | 300 Numbers | |
HEX HEAD SCREW M16 X 45-10.9 (HT) AS PER SPECN. NO. IS:1364(pt.2)/2023, IS:1367( Pt.3)/2017, CE COATING AS PER RCF/MDTS-057, REV. NIL AND THE ITEM SHOULD BE PROCURED FRO M RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS [ Warranty Period: 30 Mont hs after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 1200.00 Numbers |
| Total | 1,200 Numbers | |
HEX. HEAD BOLT M16 X 70-10.9(HT) TO SPECN NO. IS:1364 (pt.1)/2023, IS:1367 (Pt.3)/ 2017, CE COATING AS PER RCF/MDTS-057. ITEM SHOULD BE PROCURED FROM RDSO APPROVED SOU RCES OF AXLE END HIGH TENSILE CAP SCREWS [ Warranty Period: 30 Months after the date of deliv ery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 1200.00 Numbers |
| Total | 1,200 Numbers | |
HEX HEAD BOLT M12X70-10.9 (HT) -FOR LHB/FIAT BOGIE TO SPECN. IS:1364(Pt.1)2023 & IS:1367(Pt.3) / 2017 CE COATING AS PER MDTS-057 Rev. Nil ITEM SHOULD BE PROCURED FROM RD SO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS [ Warranty Period: 30 Months aft er the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX. HEAD SCREW M16 X 120-10.9 (HT) TO SPECN NO. IS:1364(pt.2)/2023, IS:1367(Pt.3 )/2017, CE COATING AS PER RCF/MDTS-057. ITEM SHOULD BE PROCURED FROM RDSO APPROVED SO URCES OF AXLE END HIGH TENSILE CAP SCREWS [ Warranty Period: 30 Months after the date of deli very ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX. NUT M16-10 PREVAILING TORQUE TYPE TO SPECN. NO. DIN 6925 / DIN 980V, IS:13 67(pt.8)/2020, A3B of IS:1367 (pt.11) / 2020 and THE ITEM SHOULD BE PROCURED FROM RDSO APPR OVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS [ Warranty Period: 30 Months after the d ate of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 3200.00 Numbers |
| Total | 3,200 Numbers | |
HEX. NUT M24-10 PREVAILING TORQUE TYPE TO SPECN. NO. DIN 6925 / DIN 980V, IS:13 67(pt.8)/2020, A3B of IS:1367(pt.11)/2020 and THE ITEM SHOULD BE PROCURED FROM RDSO APPROV ED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 1200.00 Numbers |
| Total | 1,200 Numbers | |
Hex Head Bolt M24 x 150-10.9(HT) to Specn. No. IS:1364(pt.1)/2023, IS:1367(Pt.3)/2017 , CE coating as per RCF/MDTS- 057 and the item should be procured from RDSO approved sources of Axle end High tensile cap screws [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX. SOCKET HEAD CAP SCREW M12 x 45-10.9 HT AS PER IS:2269/2006 (RA-2021),IS:1 367(Pt.3)2017 CE coating as per RCF/MDTS-057 Rev. Nil. Item should be procured from RDSO Approve d Sources of Axle End High Tensile Cap Screws. [ Warranty Period: 30 Months after the date of deliv ery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 800.00 Numbers |
| Total | 800 Numbers | |
HEX HEAD BOLT M16X170 -10.9 (HT) TO SPECN NO.IS:1364(pt.1)/2023, IS:1367(Pt.3)/20 17, CE COATING AS PER RCF/MDTS-057. AND THE ITEM SHOULD BE PROCURED FROM RDSO APPROVE D SOURCES OF AXLE END HIGH TENSILE CAP SCREWS [ Warranty Period: 30 Months after the date o f delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 800.00 Numbers |
| Total | 800 Numbers | |
HEX NUT M10-10 PREVAILING TORQUE TYPE TO SPECN. DIN6925/DIN 980V, IS:1367(pt.8 )2020 A3B of IS:1367(Pt.11)2020. ITEM SHOULD BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 600.00 Numbers |
| Total | 600 Numbers | |
Hex Head Bolt M24 x 200-10.9(HT) to Specn. No. IS:1364(pt.1)/2023, IS:1367(Pt.3)/2017 , CE coating as per RCF/MDTS- 057 and the item should be procured from RDSO approved sources of Axle end High tensile cap screws [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX HEAD SCREW M16 X 100-10.9 (HT) TO SPECN.IS:1364 (Pt.2) 2023,IS:1367(Pt.3)201 7.CE COATING AS PER RCF/MDTS-057 Rev. Nil. ITEM SHOULD BE PROCURED FROM RDSO APPROVED S OURCES OF AXLE END HIGH TENSILE CAP SCREWS. [ Warranty Period: 30 Months after the date of d elivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX HEAD BOLT M20 X120-10.9(HT) AS PER SPECN NO. IS:1364(pt.1)/2023 & IS:1367(Pt .3)/ 2017. CE COATING AS PER RCF/MDTS-057 REV. NIL AND THE ITEM SHOULD BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS. [ Warranty Period: 30 Month s after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX HEAD BOLT M12 x 55-10.9 (HT) TO SPECN.IS:1364(pt.1)/2023 IS:1367(Pt.3)/2017 C E COATING AS PER RCF/MDTS-057 Rev.Nil. ITEM SHOULD BE PROCURED FROM RDSO APPROVED SOU RCES OF AXLE END HIGH TENSILE CAP SCREWS. [ Warranty Period: 30 Months after the date of deli very ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 400.00 Numbers |
| Total | 400 Numbers | |
HEX. SOCKET COUNTER SUNK HEAD SCREW M8 x 70 - 12.9 (HT) FULLY THREADED TO S PECN.IS:6761/2023, CE COATING AS PER RCF/MDTS-057 Rev.Nil ITEM SHOULD BE PROCURED FROM R DSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LHB FIAT BOGIE SECTION/CW/PER, SR | Tamil Nadu | 800.00 Numbers |
| Total | 800 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .