SPECIAL REPAIR TO BLDG NO P-129 UNDER GE GUWAHATI

Amount

Dismantling wall and ceiling boards (fibre,pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including fillets, complete all as specified and as directed.

Providing & fixing false ceiling of 2 mm thick 595mmx595mm acrylic sheet (frosted) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel section (Galvanized @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instructions/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete at any height as per direction of Engr-in-Charge.

Material and labour for 12mm thick seamless calcium silicate POP finished ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete including two coats of oil bound distemper and including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners including suspenders, with and including ceiling section of 0.55 mm thickness having knurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and fix complete all as specified in SSR Part-I and as directed.

M&L for decorative cornices/moulding using POP of cross sectional dimension exc. 13 Sqcm & n. exceeding 25 Sqcm as per pattern & design as approved & fixed in position including preparation of surfaces and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of false ceiling sheets complete all as required as per manufactures instructions and as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars, etc. but excluding ashlar facing, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster/terrazzo dado on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises complete all as specified

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coats of plastic emulsion paint ( Ist quality) over a coat of suitable primer over white cement based wall care putty ( minimum 1.5 mm thick), complete all as specified and as directed.

M&L for complete removal of existing treatment on ceiling and applying two coats of plastic emulsion paint ( Ist quality) over a coat of suitable primer over white cement based wall care putty ( minimum 1.5 mm thick), complete all as specified and as directed.

M&L for preparation of new surface on walls and applying two coats of plastic emulsion paint ( Ist quality) over a coat of suitable primer over white cement based wall care putty ( minimum 1.5 mm thick), complete all as specified and as directed.

M&L for preparation of new surface on ceiling and applying two coats of plastic emulsion paint ( Ist quality) over a coat of suitable primer over white cement based wall care putty ( minimum 1.5 mm thick), complete all as specified and as directed.

M&L for preparation of old painted wood surface and treated with one coat of synthetic enamel paint (ordinary tint) surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed

M&L for preparation of old painted steel surfaces and treated with one coat of synthetic enamel paint (ordinary tint) surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of exterior acrylic emulsion paint (Ist quality) over a coat of alkali resistant primer over white cement based wall core putty (minimum 1.5mm thick) complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered or unplastered surfaces of walls and applying two coats of exterior acrylic emulsion paint(Ist quality) over a coat of alkali resistant primer over white cement based wall core putty (minimum 1.5mm thick) complete all as specified and directed

Taking down Chowkhats or frames exceeding. 1.5 Sqm but n. exc. 4.00 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down Chowkhats or frames not exceeding. 1.5 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

M & L for factory made PVC internal door frame of size 100mm x 45 mm with a wall thickness of 5mm, made out of extruded 5mm thick PVC sheet of density 600 Kg/cmb, and by joining 3nos heat bend PVC sheet sections. The inside section of size 90x30mm shall be made from plain colour PVC sheet of 5mm thickness. The inside section will be covered by sticking two sections of size 30x35mm and 70x45mm made from 5mm thick plain PVC sheet. The frame shall be meter cut at two corners and jointed with 4nos. of 150mm long brackets of 15mm x15mm MS square tube. The two vertical door frames are to be reinforced with 40mm x20mm MS tube of 19 gauge through out the frame. The door frame shall be fixed to the wall using 80/100mm long MS screws through the frame by using anchor fasteners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc complete all as directed .

M & L for 30mm thick factory made moulded PVC door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20mmx40mm for stiles as well as top, bottom and lock rail. M S frame shall have a coat of metal primer of approved make and manufacturer. The inside penal shall consists of 20mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/cynoacrylate adhesive with 5mm thick moulded PVC sheet of density 600Kg/Cbm with 2,4,6 raised panel design in plain/prelaminated colours after routing the moulded design on one side of the inside panel. 5mm prelaminated PVC sheet to be pasted using solvent cement/cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (made by sticking 02 Nos. from PVC sheets of 5mm thickness using PVC solvent cement adhesive). Door edge liping to be painted with PVC ink of matching colour of prelam moulded PVC sheet of door. 20mm thick (5mmx4Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100mmx25mmx2mm & 50mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardware should be fixed with 25mmx8mm size still screws etc complete all as directed .

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for door/window/ventilator shutters with extruded built up standard sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required and standard aluminium fittings like handles, door bolts and other required fittings etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P.brass / stainless steel screws, all complete as per the directions of Engineer-in-charge. (Notes:- 1. The weight shall be of all aluminium components and fittings except the gaskets. 2. Door closer, mortise lock, door stopper, Glazing, wire mesh and panelling to be paid for separately and all other fittings shall be deemed to be included in the rate quoted.)

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors/windows/ventilators and partitions with extruded built up standard sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including making provision for fixing of fittings wherever required including the cost of other required fittings etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P.brass/stainless steel screws, all complete as per the directions of Engineer-in-charge. (Notes:- 1. The weight shall be of all aluminium components and fittings except the gaskets. 2. Glazing, wire mesh and panelling to be paid for separately and all other fittings shall be deemed to be included in the rate quoted.)

M&L for 12mm thick Pre laminated particle board interior grade both sides laminated fixed to aluminium frame complete all as specified and directed.

S&F 12 mm thick tinted glass, ordinary quality, and glazing in square exceeding 0.5 sq. m in each pane complete all as specified and directed.

S&F 4.8 mm thick frosted Sheet glass, ordinary quality, and glazing in square exceeding 0.5 sq. m in each pane complete all as specified & as directed.

S&F 4 mm thick Sheet glass, ordinary quality, and glazing in square n exceeding 0.5 sq. m in each pane complete all as specified & as directed.

S&F concealed sliding window lock latch complete all as specified and as directed

S&F brass 4 levers Mortise lock, vertical type, size 100 mm complete all as specified and directed

S&F for Aluminium extruded section door closer hydraulically regulated designation No. 3 Universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg , complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete, all as specified .

S&F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed

Demolition of cement concrete (reinforced) in ground floors and pavings n exceeding 15 cm thickness (below or above ground level) removing rubbish off the premises complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed

Use and waste of formwork to chajjas weather shades and similar items including edges for rough finished surfaces of concert flat complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 37 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (nominal mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (nominal mix) as in chajjas complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n exceeding 15 cm thickness (below or above ground level) and removing debris and rubbish off the premises complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing debris and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC B-0, 1:2:4 using (12.5 mm graded aggregate) as in PCC under layer complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C 2, 1:3:6 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth without using extra cement with and including all necessary formwork and to divide the area in panels and finishing exposed edges fair and rounding or chamfered with and including filling the joints with mastic filling, complete all as specified and as directed.

M & L for Vitrified tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles exc. 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M & L for Vitrified tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles exc. 0.42 sqm but not exceeding 1.00 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing layer in CM 1:4 complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors etc laid bedded and pointed inany mortor and removing debris and rubbish off the premises complete all as specified and directed.

M&L for Granite (of any type) tiles as in floor/platform/steps etc, 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:4 or bedding layer complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement mortar backing coat and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10 mm thick backing coat in CM 1:4 or bedding layer complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M&L for white Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including Waste coupling in repair of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) 40 mm bore dia complete all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repairs PVC (SWR) pipes, single socketed, in any length, with rubber rings 75mm dia complete all as specified and directed

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed

Supply & Fixing Tubes medium grade, 15 mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and as directed.

Supply & Fixing Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and as directed.

Supply & Fixing Vitreous china wash hand basin of size 630mmx450mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed.

S&F in repairs 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F Waste coupling in repairs of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) 35 mm bore dia

S&F in repairs single piece-WC with PP soft close seat cover , Hinges, fixing accessories, Cistern fitting, Size:360x640x685mm,S trap-110mm all as specified and as directed Make-JAQUAR CAT No-SLS-WHT-6851S or equivalent model of Kohler/Marc.

S&F in repairs Wall Mixer 3-in-1 system with provision for both Hand Shower and Overhead Shower Complete with 115 mm long Bent Pipe, Connecting Legs & wall flange (without Hanh & overhead Shower) all as specified and as directed Make-JAQUAR CAT No-SOL 6281 or equivalent model of Kohler/Marc.

S&F in repairs Hand Shower 32mm bore round shape straight design dual flow (ABS Body & face plate chrome plated) with rubit cleaning system with easy flex tube in chrome finish 1.5m long with nuts all as specified and as directed Make-JAQUAR CAT No-HSH-5541 or equivalent model of Kohler/Marc.

S&F in repairs Maze overhead shower 200x200mm square shape single flow (body & face plate stainless steel with chrome finish) with rubit cleaning system with 100mm long shower arm all as specified and as directed Make-JAQUAR CAT No-OHS-CHR-1619 or equivalent model of Kohler/Marc.

S&F in repairs Single Lever Sink Mixer with 210mm Extension Body Swinging Spout without popup Waste (Table Mounted) with 600mm Long Braided Hoses all as specified and as directed Make-JAQUAR CAT No-FLR-5009B or equivalent model of Kohler/Marc.

S&F in repairs 15 mm Angular stop cock with wall flange all as specified and as directed Make-JAQUAR CAT No-FON-40053 or equivalent model of Kohler/Marc.

S&F in repairs Table top wall hang basin with fixing accessories, size :425mmx345mmx175mm all as specified and as directed Make-JAQUAR CAT No-CNS-WHT-903 or equivalent model of Kohler/Marc.

S&F in repairs Bottle trap (with internal partition) 32mm size with 250mm & 190mm low wall connection pipes & wall flange all as specified and as directed Make-JAQUAR CAT No-ALD-769L250x190 or equivalent model of Kohler/Marc.

S&F in repairs 15 mm Bib cock with flange all as specified and as directed Make-JAQUAR CAT No-ARI-39037 equivalent model of Kohler/Marc.

S&F in repairs Hand shower (health faucet)(ABS Body) with 8mm dia, 1.2 meter long flexible tube & wall hook all as specified and as directed Make-JAQUAR CAT No-ALD-573 or equivalent model of Kohler/Marc.

S&F in repairs toilet paper holder all as specified and as directed Make-JAQUAR CAT No-AKP-35751P or equivalent model of Kohler/Marc.

S&F in repairs sink cock with regular swinging spout (wall mounted model) will wall flange all as specified and as directed Make-JAQUAR CAT No-DRC-37347S or equivalent model of Kohler/Marc.

S&F in repairs Click Clack Waste 32mm Size Half Thread with 130mm Height all as specified and as directed Make-JAQUAR CAT No-ALD-729L130 or equivalent model of Kohler/Marc.

S&F in repairs Towel Rack 600mm long with Lower Hangers, Stainless Steel all as specified and as directed Make-JAQUAR CAT No-AKP-35781PS or equivalent model of Kohler/Marc.

S&F in repairs Corner Glass Shelf (with Bracket) all as specified and as directed Make-JAQUAR CAT No-CAN-1173 or equivalent model of Kohler/Marc.

S&F in repairs reflection looking mirror of size 600mmx450mm fixed to wall with chromium plated brass screws and cup washers all as specified and as directed Make PARRYWER Cat No- C 8611 or equivalent model of Prayag

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed.

Taking down carefully UNSV main switch and DB's including MCBs of of any size make, type and capacity and depositing at site as directed.

M&L for point wiring for modular fittings with 1.5 Sqmm (nominal area) PVC insulated 1100 volts grade, multistranded, copper conductor, single core, unsheathed cables (FRLS quality) drawn through and including PVC conduits of suitable size but not less than 20 mm dia (medium grade) with all fittings and accessories including cutting chases for conduits and sinking for boxes and making good to disturbed surfaces, including PVC insulated and unsheathed, single core, multi-stranded, copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light point controlled by one 5 Amps one way switch complete as specified and directed. Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

All as per Srl item No.82.00 here in before but for one fan point controlled by one way switch.

All as per item No 82.00 above but for one 3 pin socket outlet 5 Amps on same board alongwith other suitable switches.

All as per item No 82.00 above for 3/5 pin 5 Amps switch socket outlet on independent board (Power point) complete all as specified.

All as per item No.82 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board.

M&L for concealed sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FLSR) drawing in and including 20mm dia rigid non metallic PVC conduit & accessories like bends, tee, etc fixed on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed complete. NOTE: (a) 2 runs of main wire, 1 run of earth wire, 1 run of conduit with accessories shall be measured as one length. (b) Quoted rate shall be inclusive for necessary chasing and cutting and making good .

Supply & fix 24W Flexible LED Strip with driver, high brightness SMD LED as the light source for indoor application and suitable for cover lighting, decorative lighting with system lumen output of 2100 lumens. System Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80, life 40000 burning hrs with 70% lumen maintenance. All the Photometrical & Electrical parameters must be supported by LM79-08 test report from NABL Accredited LAB OR UL, R9 Value > 0, lamp starting time shall not be more than 1 Sec. complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make- HAVELLS, Model-FLEXISTRIP5MTRIP2024WLED860S or equivalent in Philips/Crompton Greaves

Supply & fix 34W 4X1 LED Flat Panel For surface mounting (white light) with system lumen output of 2100 lumens, system Efficacy should be > 115lm/ W. The Luminaire should have Cool Daylight Color temp of 6500K & CRI>80, life 40000 burning hrs with 70% lumen maintenance. All the Photometrical & Electrical parameters must be supported by LM79-08 test report from NABL Accredited LAB OR UL, R9 Value > 0, lamp starting time shall not be more than 1 Sec.complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size- HAVELLS, Model-PLUTOSURFACE4X1PLS34WLED857S or equivalent in Philips/Crompton Greaves

Supply & fix 18W LED Edgepro range of slim fit low profile downlights(white light) with system lumen output of 2100 lumens, system Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80, life 40000 burning hrs with 70% lumen maintenance. All the Photometrical & Electrical parameters must be supported by LM79-08 test report from NABL Accredited LAB OR UL, R9 Value > 0, lamp starting time is not more than 1 Sec. Complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make- HAVELLS, Model-EDGEPRORDDLR18WLED857S or equivalent in Philips/Crompton greaves

S&F Wall Light 2 x 7.5W LED filament lamp elegant design with antique brass finish wall mounted, without shade, with driver, lamp holders, connector block, etc. complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size. Make- HAVELLS,Adelia range, Model-LHFOAFC2TZ1T040 or equivalent in Philips/Crompton Greaves

S&F Ceiling Mounted 1 x 7.5W LED filament lamp elegant design with premium chrome finish, easy height adjustment during installation, without shade, with driver, lamp holders, connector block, etc. complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size. Make- HAVELLS,Penelope Pendant 1LS E27 D390 CRM+WD, Model-LHFXAFN1TN1C060 or equivalent in Philips/Crompton Greaves

Supply and fixing of modular switch one way 5 amps 1 module 230/250 Volts complete all as specified/directed.

S & F Modular switch socket combination 2 in 1, 3/5 pin, 6 Amps,2 module 240 Volts complete all as specified/directed.

S & F Modular Switch socket Combination 16A, 6 pin, 3 module type complete all as specified/directed.

S & F ceiling rose surface bakelite two to three terminal 65 x 50 mm three terminal 250/230 volts ISI marked.

Taking down ceiling fans, cleaning of any size, oiling and greasing thoroughly and spray painting with super enamelled paint (white) and refixing at the existing site/rooms and connected with 23/0.0076 three core PVC flexible cable from ceiling rose to fan etc complete all as specified and directed.

Taking down exhaust fans of any size, cleaning, oiling and greasing thoroughly and spray painting with super enamelled paint (existing color) and refixing at the existing site/rooms and connected with 23/0.0076 three core PVC flexible cable from ceiling rose to fan etc complete.

Supply and fix in repairs MCB DB 8 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. (Make : Legrand/Schnieder/C&S)

S&F Modular Metal flush box 6 module complete all as specified/directed.

S&F Modular Metal flush box 4 module complete all as specified/directed.

S&F Modular Metal flush box 3 module complete all as specified/directed.

S&F Modular White Cover Plate With Frame 6 Module complete all as specified/directed.

S&F Modular White Cover Plate With Frame 4 Module complete all as specified/directed.

S&F Modular White Cover Plate With Frame 3 Module complete all as specified/directed.

S&F Modular fan step regulator,120W,2 Module A/C 240 Volts complete all as specified/directed.

Supply and fixing plug and socket box single pole and neutral enclosure with a two pin and earth complete with one single MCB SP 20 Amps complete all as specified/directed. Make : Legrand/Schnieder/C&S

S & F MCB TPN 32 Amps, 10 KA, 415 Volts complete all as specified/directed. (Make : Legrand/Schnieder/C&S)

S & F MCB SP 5 to 30 Amp 240 Voltscomplete all as specified/directed. (Make : Legrand/Schnieder/C&S)

M/S K Nath and co

M/S SEWAK SINGH

PRITHWI BUILDERS