Set of Fasteners for Wheel Set Earthing Housing Modification as per Drg. No. SKED- 945. One set consist of Fasteners as Follows:-1) Stainless Steel Bush, L=18mm, Thread size M12x1.75(outside)/M8X1.25 (inside) (Mat. AISI 304) to match with M8 Allen screw) Qty. 03 nos./Set2) Stainless Steel Bush, L=15mm, Thread size M12x1.75(outside)/M8X1.25 (inside) (Mat. AISI 304) to match with M8 Allen screw) Qty. 02 nos./Set3) Stainless Steel Bush, L=10mm, Thread size M12x1.75(outside)/M8X1.25 (inside) (Mat. AISI 304) to match with M8 Allen screw) Qty. 01 no./Set4) Stainless Steel Stud M8x55mm (Mat. AISI 304) with both end threaded Length of 25 mm & 20 mm. Qty. 02 Nos./Set5) Stainless Steel Stud M8x50mm (Mat. AISI 304) with both end threaded Length of 25 mm & 15 mm. Qty. 01 No./Set6) Stainless Steel Lock nut, M8 Qty. 03 Nos./Set.One set consist of 06 items & Qty. 12 nos

Firm who have supplier same/similar items only be considered. Firm are requested to attach performance documents for having supplied same or similar items to Railways. Viz., R-Note, CRN, Inspection, Payment etc., Failing which Railways reserves the right to pass over the offer.

Supply as per tender specification/description

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

The offers shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter se ranking. While submitting offer, it shall bethe responsibility of the bidder to ensure that they quote correct GST rate and HSN number. Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder.

Goods and Service Tax (GST) shall be applicable as per GST act (Please refer Para14.0 ( a to h) Part-A of tender condition.INPUT TAX credit benefit if any accrued should be passed on to the purchase as reduction in Basic Price, or else the following certificate should accompany the bill: A) It is certified that no INPUT TAX credit benefit has accrued on materials invoiced/billed for, that can be passed on to Purchaser. B) Firm should submit the Invoice/Bill clearly indicating the appropriate HSN and applicable GST rate there on duly supported with documentary evidence. C) Firm should also give a declaration that any additional Input Tax Credit benefit, if become available to supplier, the same shall be passed on to purchaser without any undue delay.