Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

GOVERNMENT OF BIHAR

PUBLIC HEALTH AND ENGINEERING DEPARTMENT

Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

ESTIMATED COST:

Name of Division: P.H Division, Dhamdaha

Name of Circle: P.H.E Circle , Purnea

GOVVERENTMENT OF BIHAR

PUBLIC HEALTH ENGINEERING DEPARTMENT

P. H. DIVISION, DHAMDAHA

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Summary of Estimated Cost

(Civil + PHE + ELE + FURNITURE )

Abstract of Cost

Sl. No. Particulars Estimated Amount (Rs.)

1 Cost for Civil Works (Ref. Summary Detail 1) :

2 Cost for Internal Water Supply & Sanitary Works (Ref. Summary Detail 2) :

3 Cost for Electrical Works (Ref. Work Detail 3) :

4 Fire Safety Arrangement (Ref. Work Detail 4)

5 Furniture (Ref. Work Detail 5)

6 Solar Photo Voltaic Power Generation System (Ref. Work Detail 6)

(Seventy Two Lac Eighty Thousand One Hundred Only)

Executive Engineer

P. H. Division, Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

ABSTRACT OF COST

S.No. Discription Amount

1 Construction of Proposed Office Building of Assistant Engineer, P.H Sub Division Dhamdaha under P.H Division Dhamdaha in the District of Purnea for year 2025-26. (As Per Approved Design & Drawing of Building submitted by Contractor)

(Seventy Two Lac Eighty Thousand One Hundred Only)

Executive Engineer

P.H. Division, Dhamdaha

Summery Datail 01

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Summary of Estimated Cost

Civil Works (Ref. Work Detail 1)

Sl. No. Particulars Total Estimated Amount (Rs.)

1 Concrete Works 76619.13542879625

2 Reinforced cement concrete works 2011371.6682690799

3 Masonary Works 618072.7838316287

5 Steel Works 230055.64255704178

6 Flooring Works 890244.5546184108

7 Plaster & Finishing works 518131.56480723835

8 Carriage of Materials 353678.8495

Total (Civil Works) : Rs. 4981721.914747836

Executive Engineer

P.H Division Dhamdaha

Quantity Detail 1

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Estimate of Quantities

Sl. No. Item No. L B H/D Qty. Unit

0.0 Plinth Area Calculation

Laboratory 1 sqm

Chemist room 1 sqm

Lab Store 1 sqm

Subdivisional store 1 sqm

JE Chamber 1 sqm

HER 1 0.000 0 sqm

PH Toilet 1 sqm

WC 2 0.000 0 sqm

0.0 Concrete work

2.1 Providing P.C.C (1:2:4) in Flooring Work 0 cum

Providing & Laying RCC M25 upto Plinth

Wall, Column, Pillar

Column Roof to Top

Mumty Column 4 2.85 cum

Parapet 20 0.25 cum

B/w Grid -A & B 2 cum

Grid -4 & 5 2 cum

deduction for column cum

deduction fo stair -1 0.135 cum

total Roof slab cum

RCC M25 in Lintel

D2 1 0.25 cum Chajja

Laboratory shelf 1 cum

RCC Band at Lintel etc. 1 0.25 cum

parapet band 1 cum

RCC Fins 1 0.6 cum

Waist Slab 2 cum

Landing Slab 1 cum

Steps 18 0.3 cum

3.3.2 RCC Above plinth

Roof Beam cum 1.6

Roof Slab cum 0.3

RCC M25 in Lintel cum -0.8

RCC Chajja cum 0.09

RCC Fins cum 0.1

RCC Stair cum -0.5

3.2 Reinforcement for RCC Work

Columns cum @ 150 kg/cum MT

Roof Beam cum @ 110 kg/cum MT

Roof Slab cum @ 80 kg/cum MT

Lintel cum @ 60 kg/cum MT

RCC Band at Lintel cum @ 60 kg/cum MT

RCC Chajja cum @ 60 kg/cum MT

Fins cum @ 60 kg/cum MT

Stair cum @ 105 kg/cum MT

10 mm dia. = 10

12 mm dia. = 20

16 mm dia. = 17

20 mm dia. = 15

3.1 Centring and Shuttering

3.1.3 Suspended Floor Roof Landing

Landing Slab sqm

3.1.4 Lintel Beam,

X - Direction 0.7 sqm

RCC M25 in Lintel 2 / sqm

3.1.5 Column, Pillar, Piers

Column Roof to Top

Mumty Column sqm

3.1.6 Stairs (excluding landing)

Landing Slab sqm

3.1.7 Vertical & Horizontal Fins sqm

3.1.8 Wheather shade chhajja / 0.075 sqm

3.1.9 Edges of slab

Extra for additional height in centring, shuttering wherever required with adequate bracing, propping etc. including cost of de-shutering and de centring at all levels over a height of 3.5 m ,for every additional height of 1 metre or part thereof (Plan area to be measured) sqm

0.0 Brick Works

4.2 Fly ash Brick work CM(1:4) in Super Structure

Grid -3,6 & 7 0 cum

Grid - A & C 0 cum

Grid -A & D 2 cum

B/ W Grid -C & D 1 0.999 0.25 cum

Grid -1 & 8 2 cum

Grid -3,4,5 & 7 4 cum

Mumty 1 0.25 cum

4.4 Extra for providing and placing in position 2 Nos, 6 mm dia cum

5.1 P/F Flush Door Shutter

5.2 P/F aluminium Sliding door bolt 300X16mm

5.3 P/F Aluminium tower bolt

5.4 P/F Aluminium pull bolt lock

5.5 P/F Aluminium handle

5.6 P/F Aluminium floor door stopper

5.7 Extra for providing lipping sqm

5.8 P/F wooden moulded beading mtr.

0.0 Steel Works

6.1 P/F Steel glazed window

6.2 P/F Presed Steel door frame

6.3 P/F MS Fan Clamp. 1 x 18 Nos.

6.5 P/F MS Grill to window sqm @ 12 kg/sqm kg

6.7 P/F steel work in built up section

Gate 1 3.05 sqm

0.0 Flooring Work

7.2 Extra for providing and fixing 30 mm x 4 mm glass strips

Bed room 14 mtr.

Sleepout 5 mtr.

Stair case 5 mtr.

First Floor Same as Gr. Floor mtr.

7.2.1 Vetrified Tiles 600x600mm in Flooring

7.3.1 Vitrified Floor Tiles in Flooring

Chemist room sqm

Subdivisional store sqm

7.2.2 Vetrified Floor Tiles in Skirting

Ground Floor 2.15

7.3.2 Vitrified tiles in Skirting

Laboratory 0.1 sqm

Hot Room 0.1 sqm

Chemist room 0.1 sqm

Lab Store 0.1 sqm

Subdivisional store 0.1 sqm

JE Chamber 0.1 sqm

Corridor 0.1 sqm

7.4 P/F Ceramic floor tiles

7.5 Providing and fixing 1st quality ceramic glazed wall tiles

PH Toilet 1.8 sqm

7.6 Granite stone flooring

Staircase 1 sqm

Landing Slab sqm

Steps riser 0.15 sqm

StepsTreads 0.3 sqm

Staircase 0.1 sqm

Landing Slab 0.1 sqm

StepsTreads 0.1 sqm

Entrance 0.1 sqm

7.7 Extra for edge molding sqm

0.0 Plaster and finishing work

8.1 Providing 12mm cement plaster (1:6)

Chemist room sqm

Subdivisional store sqm

Deduction door window

Parapet 1 1.05 sqm

8.2 Providing 15mm cement plaster (1:3) External Wall

Outer wall 1 sqm

Qty vide item 3.1.8 sqm

Deduction window

8.3 Providing 6mm cement plaster (1:4) with clean coarse sand Celling

Chemist room sqm

Subdivisional store sqm

Terrace mumty sqm

Chajja same as item 3.1.8 sqm

Landing Slab sqm

8.4 Providing and applying wall putty of 2 mm thick

Total Qty ,+ sqm

8.5 Providing two coats of oil bound distemper

Internal plaster sqm

8.6.1 Providing two coats of synthetic enamel paint over a coat of primer over new

Wooden surface 2 sqm

8.6.2 Providing primer of red lead paint one coat over new

Steel surface same as item 5.1 sqm

8.7 Providing two coats of synthetic enamel paint over steel surface + sqm

8.8 Forming grooves of uniform size 1 mtr.

EXT. WALL 1 mtr.

8.9 Providing 1.5mm neat cement punning 1 0.6 sqm

8.1 Acrylic smooth extrier Pant Qty as per item no 8.2 sqm

Executive Engineer

P.H Division Dhamdaha

9 Carriage of Materials

Qnty Cement (Tonnes) Bricks (Nos) Coarse sand (cum) Stone chips (cum) Local sand (cum)

4 masoonary work in CM (1:6)

5 half masonary work in CM(1:4)

7 Vetrified Tiles flooring 0

8 Vetrified tiles in skirting 0

9 Vitrified flooring

10 vetrified tiles in skirting

14 Ceramic glazed tiles in dado

15 Ceramic glazed Wall tiles

17 15mm CP in 2 layer

Tonnes Nos Cum Cum Cum

Executive Engineer

P.H Division Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Estimate of Cost

(Civil Works) ( (Ref. Quantity Detail 1)

Items Covered Under BCD-SOR-2022, effective from 01.01.2022

Sl. No./ Code. SOR-22 Description of Work Unit Qty. Rate (Rs.) Amount (Rs.)

0.0 Concrete Work

2.1/ 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

2.1.1/ 4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) cum 3998.1

2.2/ 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufactures. Per 50 kg Cement 0

Sub Total '2' (Concrete Work) : Rs.

Sub Total '2' (Concrete Work) :

0.0 Reinforced Cement Concrete Works

3.1/ 5.9 Centring and shuttering including strutting, propping etc. and removal of form for:

3.1.3/ 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 437.5

3.1.4/ 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 404.7

3.1.5/ 5.9.6 Columns, Pillars, Piers, Abutments, Post and struts sqm 494.4

3.1.6/ 5.9.7 Stairs, (excluding landings) except spiral staircases. sqm 439.9

3.1.7/ 5.9.13 Vertical and Horizontal fins individually or forming box louvers band, facias ane eaves boards. sqm 0.00_);\(0.00\)

3.1.8/ 5.9.19 Wheather shade, Chajja, corbels etc., including edges. sqm 550.9

3.1.9/5.11.1 Suspended floors, roots, laning, beams and balconies (Plan area to be measured) sqm 174

3.1.9/ 5.9.16.1 Edges of slabs and breaks in floors and walls :

Under 20 cm wide Metre 0.99_);\(0.99\)

3.1.10/ 5.22 Reinforcement for RCC work including straightening. Cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars

3.3/ 5.33. Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength and admixtures in recommended proportions as per IS: 9103 to accelerate,reinforcement,durability as per direction of Engineer-incharge.

3.3.2/ 5.33.2 All work from plinth level upto floor V level. cum 5863.2

Sub Total '3' (RCC Work) : Rs.

Sub Total '3' (RCC Work) :

0.0 Masonary Work

4.1/ 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :

4.1.1/ 6.1.14C Cement mortar 1:6 (1 cement: 6 coarse sand ) - 250 mm th Brick work cum 4923

4.1.2/ 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :

4.1.2/ 6.1.12C Cement mortar 1 : 4 (1 cement : 4 coarse sand)- 125 mm th Brick work cum 5116.3

4.2/ 6.3C Extra for Brick work in superstructure above plinth level upto floor V cum

4.2.1 250 mm th Brick work in C.M (1:6) cum 842.2

4.2.2 125 mm th Brick work in C.M (1:4) cum 842.2

4.4/ 6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks)

Sub Total '4' (Brick Work) : Rs.

Sub Total '4' (Brick Work) :

5.1/ 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:shutters:

5.1.1/ 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 1775.3

5.2/ 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

5.3/ 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete:

5.4/ 9.98 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. each 0.00_);\(0.00\)

5.5/ 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

5.6/ 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper each 60.8

5.7/ 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) Sqm 401.4

5.8/ 9.40 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

Sub Total '5' (Wood Work) : Rs.

Sub Total '5' (Wood Work) :

6.1/ 10.12.1 Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required.

6.2/ 10.15 Providing and fixing pressed steel door frame confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by . mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

6.3/ 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing each 165.4

6.4/ 10.32.2 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works kg. 114.6

6.5/ 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

6.6.1/ 9.48.1 Fixed to steel windows by welding. kg. 144.5

Sub Total '6' (Steel Work) Rs.

Sub Total '6' (Steel Work)

0.0 Flooring work

7.2/ 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to ben specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joint with white cement and matching pigments etc., complete

11.41.2 Size of Tile 600x600 mm metre 0

7.3.2/ 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

11.41.3 Size of Tile 80x80 cm sqm 2116.5

7.4/ 11.46 Providing and laying Vitrified tiles in different sizes (thickness to bem specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

7.4.2/ 11.46.3 Size of Tile 800 x 800 mm. sqm 1658

7.5/ 11.39 Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturer) of 1 st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours such as white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. sqm 1329.8

9.6/ 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Motar 1:3 (1cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 795

8.9/ 11.32 Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length Sqm 0

8.10/ 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab. Metre 0 0.99_);\(0.99\)

11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 3605.2

8.3 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- Charge.e.

8.3.2 Granite work m 0.00_);\(0.00\)

7.3.2/ 11.3 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

Sub Total '7' (Flooring Work) : Rs.

Sub Total '7' (Flooring Work) :

0.0 Plaster & Finishing Works

8.1/ 13.11 12 mm cement plaster of mix

8.1.1/ 13.11.4 1:6 (1 cement : 6 coarse sand) sqm 141.5

8.2/ 13.12 15 mm cement plaster on rough side of single or half brick wall of mix.

8.2.1/ 13.12.2 1:4(1 cement: 4 coarse sand ) sqm 176.4

8.3/ 13.24 6 mm cement plaster to ceiling of mix.

8.3.1/ 13.24.2 1:4 (1 cement : 4 coarse sand) sqm 125.6

8.4/ 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 105.4

8.5/ 13.77 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.

8.5.1/ 13.77.2 New work (two or more coats) over and including priming coat with cement primer. sqm 102.3

8.6/ 13.81 Applying priming coat:

8.6.1/ 13.81.1 With ready mixed pink or grey primer of approved brand and manufacture on woodwork (hard and soft wood) sqm 0.00_);\(0.00\)

8.6.2/ 13.81.3 With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works sqm 34.6

8.7/ 13.93 Painting with synthetic enamel paint of approved brand and manufacture to give an even shed.

13.93.1 Two or more coats on new work sqm 84.5

8.8/ 13.116 Forming groove of uniform size from 12 x 12 mm and upto 25 x 15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-charge. Metre 47.1

8.9/ 13.26 Neat Cement punning Sqm 40.5

8.10/ 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 Ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm) Sqm 137

Sub Total '8' (Finishing Works) : Rs.

Sub Total '8' (Finishing Works) :

0.0 Carriage of Materials

(I) Bricks per 1000 nos

(ii) Coarse Sand cum

(iii) Stone Chips cum 1746.29

(iv) Local sand cum 310.45

Sub Total '13' (Carriage of Materials): Rs.

0.0 Difference in cost of Materials

(i) Cement bag 616

(ii) Bricks per 1000 nos 30784

Sub Total '12' (Difference in cost of Materials): Rs.

Executive Engineer

P.H Division Dhamdaha

Summery Datail 02

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Office Building

Summary of Cost

(P.H.E. Works) ( (Ref. Work Detail 2)

Sl. No. Particulars Estimated Amount (Rs.)

0.0 WATER SUPPLY WORKS :

0.0 SANITARY INSTALLATION :

Executive Engineer

P.H Division Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Office Building

Estimate of Cost

Item covered Under BCD-S.O.R. 2022, Govt. of Bihar

Sl. No. SOR Code Description of Work building Unit Qnty. Rate (Rs.) Amount (Rs.)

WATER SUPPLY WORKS

0.0 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(internal work)

Exposed on walls

1.1 18.7.3 25 mm nominal outer dia Pipes 42 Metre 317.3

1.2 18.7.5 40 mm nominal outer dia Pipes 20 Metre 538.4

0.0 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

2.1 18.8.1 15 mm nominal outer dia Pipes 30 Metre 278.2

2.2 18.8.2 20 mm nominal outer dia Pipes 42 Metre 350

0.0 Providing and fixing brass stop cock of approved quality (screwed end).

3.1 18.16.1 15mm nominal bore 12 Each 303.8

0.0 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end).

4.1 18.17.1 25mm nominal bore 2 Each 532.6

4.3 18.17.3 40mm nominal bore 1 Each 707.3

0.0 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end)

5.1 18.19.2.1 25mm nominal bore

Horizontal 1 Each 506.6

0.0 Providing and fixing P V C connection pipe with brass unions.

6.1 18.21.2.1 45 cm length

15 mm nominal bore 12 Each 85.2

0.0 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc.complete (new work)

9.1 18.46.1 15 mm nominal bore 2 Each

9.2 18.46.2 20 mm nominal bore 2 Each 185.6

9.3 18.46.3 25 mm nominal bore 4 Each

9.5 18.46.5 40 mm nominal bore 4 Each 419.7

0.0 18.49 Providing and fixing C.P. brass,bib cock of approved quality conforming to IS : 8931 6 Each 434.2

0.0 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS stamdards and weighing notless than 810 gms.

11.1 18.50.1 15 mm nominal bore 2 Each 715.1

0.0 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS stamdards and weighing notless than 690 gms.

12.1 18.51.1 15 mm nominal bore 2 Each 708.4

0.0 Providing and fixing C.P brass stop cock (concealed) of standard design and of approved mark conforming to IS:8931

13.1 18.52.1 15mm nominal bore 6 Each

0.0 Providing and fixing C.P brass angle valve for basin mixer and gyser points of approved quality conforming to IS: 8931

14.1 18.53.1 15mm nominal bore 6 Each 500.4

0.0 18.65 Providing and fixing PTMT Soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 6 Each 96.8

0.0 18.76 Cutting holes up to 30 x 30 cm in walls including making good the same:

16.1 18.76.1 With common burnt clay F.P.S. (non modular) bricks 8 Each 198.5

0.0 18.77 Cutting holes up to 15 x 15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) including finishing complete so as to make it leak proof. 8 Each 217.1

0.0 18.79 Making holes up to 20 x 20 cm and embedding pipes upto 150 mm in diametre in masonary and filling with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) including dispopsal of malba. 8 Each 115.7 2

total (Water Supply works) : Rs.

Sub total (Water Supply works) : Rs.

SANITARY INSTALLATION

0.0 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

19.1 17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 2 Each 2369.9

0.0 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 4 Each 1500

0.0 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.

21.1 17.28.2.2 Flexible pipe

40 mm dia 6 Each 6

0.0 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comelete. 6 Each 1068.5

0.0 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete 6 Each 713.3

0.0 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

24.1 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm an effective height of 88 mm, weighthan 190 gms 6 Each 424

0.0 17.35 Providing and fixing soil, waste and vent pipes :

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 25 Metre 25

0.0 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron / Cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone agregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.

26.1 17.37.1 For 100 mm dia pipe 22 Each 178.5

0.0 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick bolts and nutts complete

Sand cast iron S&S as per IS - 3989 6 Each 597.6

0.0 Providing and fixing plain bend of required degree

Sand cast iron S&S as per IS - 3989 12 Each 439.7

0.0 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts & nuts complete.

Sand cast iron S&S as per IS - 3989 12 Each 731.4

0.0 17.56 Providing and fixing terminal guard

Sand cast iron S&S as per IS - 3989 12 Each 439.7

0.0 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter

0.0 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

32.1 17.60.1.2 Sand Cast Iron S&S as per IS: 1729 8 Each 928.5

0.0 17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

33.1 17.65.1 100 mm diameter pipe 59 metre 46.1

0.0 12.78 Providing and fixing on wall face unplasticised PVC (working pressure 4 kg per sqcm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

34.1 12.78.2 110mm diameter 45 Metre 257.5

0.0 12.79 Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised-PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

35.1 12.79.2.2 Single pushfit Coupler:

110mm 12 Each 374.5

35.2 12.79.3.2 Single tee with door

110x110x110mm 6 Each 193.4

110mm bend 12 Each 132

35.4 12.79.6.2 Shoe plain

110mm Shoe 8 Each 115.95

0.0 12.80 Providing and fixing unplasticised-PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S screws or required length including cutting brick work and fixing on cement mortar (1:4) 1 cement:4 coarse sand and making good the wall etc. complete.

0.0 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. 12 Each 47.9

0.0 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

38.1 17.1.1 White Vitreous china Orissa Pattern W.C pan of size 580x440mm with integral type foot rests. 2 Each

0.0 17.2 Providing and fixing white vitreous china pedastal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

39.1 17.2.1 W.C pan with ISI marked white solid plastic seat and lid. 4 Each 4230

0.0 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105gms. 6 Each

0.0 17.5. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass lush pipe,spreaders with unionsand clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I.trap with outlet grating and other couplings in C.P. brass, includingpainting of fittings and cutting and making good the walls and floors wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 2 Each 6469

0.0 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 P/L

0.0 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distances of 37mm fromwall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 90 gms. 4 Each 204.7

Sub total ( SANITARY INSTALLATION) : Rs.

Sub total ( SANITARY INSTALLATION) : Rs.

Executive Engineer

P.H Division Dhamdaha

Name of Work- Construction of Office Building for Assistant Engineer at P.H. Sub Division, Amas (Including Civil Works, PHE works, Electrification works, Site Development & Procurement of furnitures & furnishing) in district Gayaji under P.H. Division, S

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

INTERNAL ELECTRIFICATION OF SUB DIVISIONAL BUILDING

Items Covered Under BCD-Electrical SOR-2023

Sl. No. SOR Code. Description of Work Unit Qty. Rate (Rs.) Amount (Rs.)

Electrical Works

1 Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FR PVC insulated copper conductor cable in recessed PVC conduit with modular type switch , modular plate, suitable size GI box etc as required.

1.3.3 Group C Point 22

2 Supplying and fixing suitable size GI box with modular plate and cover in recess including providing and fixing modular type 3 pin 5/6 amps socket outlet & 6A switch connection etc. as required. Each 19

3 Supplying and fixing of suitable size GI box with modular plate and cover in recess including providing and fixing modular 6 pin 15/16 amp socket outlet &15/16 amp modular switch including connection,painting etc as required Each 15

4 Wiring for light/ power plug plug with 2 X 4 sq. mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required meter 56

5 Supplying and fixing 2 pin, 6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 23

6 Supplying and fixing Batten/angle holder on the exisiting jucction box/pvc box including connection etc. as required. Each 19

7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 29

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 25

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 22

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 19

1.7.12 4 X 10 sq. mm + 1 X 10 sq. mm earth wire Meter 15

8 1.15 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required

1.15.1 1 X 1.5 sq. mm Meter 26

9 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. Each 2

10 2.31.1 Supplying and fixing following rating and pole, 24A/415 volts, MCB type changeover in the existing MCB DB complete with connections, testing and commissioning etc. Each 4

11 AR Supplying and fixing Suitable G.I box with modular plate & cover in front of surface or in recess including providing and fixing 4 nos. 3 pin 5/6 amps modular socket outlet & 4 nos 5/6 amps modular switch, connnection etc as required.( Use for computer point) Each 6

12 Supplying and fixing following way, horizontal type,three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.9.1 4 way ( 4 + 12 ), double door, horizontal type Each 1

13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 Amp. To 32 Amp. SP MCB Group-B 240 Volt Each 6

2.12.7 50/63 Amps, Tripole pole and neutral Each 3

14 0.9 Supplying and fixing 70112 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete u.,ith integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 8

15 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.6 15 watt LED lamp Each 8

16 5.11 Supplying and fixing wall mounted light bracket/ fixture made with polycarbonate suitable for single 9/10 watt LED lamp directly on wall including connections etc as required. ( But without lamp ) Each 12

17 Supplying and fixing following types aluminium extruded suspended type LED luminaire with minimum efficacy 100 lm/w ensuring uniform and continuous illumination including suspension system complete with electronic driver etc and connection with 1.5 sq.mm FRLS pVC insulated copper conductor cable etc as required.

5.6.2 4' long X 35/40 watt Each 4

18 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

5.14.4 90 watt Each 1

19 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ CFL street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. Each 2

20 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 6

21 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc.as required. Each 6

22 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage,connection, testing and commissioning etc as required.

8.17.1 300 mm sweep Each 1

23 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.). sqft 4

24 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required'

2.4.3 160 Amp, 36 KA, FPMCCB Each 1

2.4.18 500 Amp, 35 KA, TPMCCB Each 1

25 Providing and fixing following capacity four pole ONload/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

2.7.6 200 Amp, four pole Each 1

26 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.7 40/63 Amps, Tripole pole and neutral Each 6

27 AR Supplying and fixing Copper strips 50x5mm sizefor busbar including inter connection etc as required per kg 9

28 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. each 1

29 AR Supplying and fixing Pilot lamp for indication. each 2

30 AR Supplying and drawing of following size of ISI marks FR PVC insulates singke core copper conductor cable for inter connection of main switch/ busbar main switch etc as required.

4 X 16.0 sq. mm mtr. 9

31 AR Supplying of following size& core PVC XLPF insulated Sheathered unmounted electrical cable with aluminium conductor for working voltage upto 1.1 kv as required

185 sq. mm 3.5 core mtr. 10

32 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required

7.1.3 Above 95 sq. mm and upto 185 sq. mm mtr. 16

33 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. Set 1

34 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. mrt 19

35 AR SITC of OPR Early steamer emission (ESE) lighting protection along with Accessaries . Make ABB/ Hakel/ LPL etc all complete as required each 1

36 AR SITC of mounting mast to hold early steamer emission OPR 45 of rubust design with guy wire & base plate along with Accessaries . Make ABB/ Hakel/ LPL etc all complete as required each 1

37 AR Supply of OPP flash light counter working electromechanically without any power supply Make ABB/ Hakel/ LPL etc all complete as required each 1

38 AR Supply & instalation of 25 x 3 mm copper down conductor with all Accessory Make ABB/ Hakel/ LPL etc all complete as required mtr 16

39 AR SITC test clamp manufactured from high quality alloy of copper for excellent corrosion resistance Make ABB/ Hakel/ LPL etc all complete as required mtr 1

40 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for eafth electrode to fill up the excavated earth and earth inspection pit etc. as required. per set 1

41 Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in theexisting metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc. as required.

2.1.5 63 Amp, TP&N each 1

42 AR Supplying of following size & core PVC XLPF insulated Sheathered unmounted electrical cable with aluminium conductor for working voltage upto 1.1 kv as required

25 sq. mm 3.5 core mtr. 15

Add factor of 0.0536 for 18% GST instead of 12%

Total with GST factor

43 GeM Providing and installing 1.5 Ton Split wall mount AC of % star rating ISEER value>=5 to <=5.5 inverter AC- variable speed. Cooling capacity 4750-5800, copper condenser,synthetic air filter,refrigerant GWP 675(R32),refrigerant ozone layer depletion Zeroetc with necessary accessories all complete as per direction of engineer in charge. no 1

44 GeM Providing and installing Inverter heavy duty 1.2 KVA with warranty of 2 years all complete as per direction of engineer in charge. no 1

45 GeM Providing and installing stabilizer 5kva Input voltage range Single Phase Sine wave (90V-300V) with 36 month warranty all complete as direction of engineer in charge no 1

46 GeM Providing and fixing RO water purification system having all the necessary components such as pressure pump, filters, water tank, suitable hot / cold / normal water dispensing arrangement, control system etc as applicable to provide safe drinking water as per IS 10500 and as per IS 16240 with 15L/hr purification capacity. no 1

47 GeM Tubular Battery for Home, Office & Shops 200Ah Recyclable and Reliable Inverter Battery no 1

Executive Engineer

P. H. Division, Sherghati

Fire Safety Arrangement

S.N. Code No. Particulars Quantity Unit Rate Amount

Downcomer System

1- 2.28 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

1.1/ 2.32 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

9.1 Single headed Gunmetal 0.0 set each 7245

2- 11.72 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

11.3 65 mm dia 2 set each 3864

2.1- 4.1.4 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm no minal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. "Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket."

17.1 30 meters 2 set each 7920

TOTAL Fire safety

Executive Engineer

P. H. Division, Dhamdaha

Executive Engineer

P.H Division Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

FURNITURE & FURNISHING

S.N. Particulars Quantity Unit Rate Amount

1 Supplying and placing GODREJ INTERIO Grandeur main table of size 1800x900x730 with ERU. Under structure of main table should have gable end modesty panel. Modesty panel should be made of prelaminated MDF board. Thickness of table top should be 40mm thick and thickness of gable end should be 18mm. It should have keyboard tray with telescopic channel. and two set of movable drawer units with locking system with 3 sets of keys foe each drawer unit. (AE Chamber) 0.0 nos each 112520

2 Supplying and placing GODREJ INTERIO Modular Table with Particle Board Table Top and Metal Understructure 0.0 nos each 36511

3 Supplying and placing GODREJ INTERIO Revolving Chair with Active biosynchro mechanism 0.0 nos each 38132

4 Supplying and placing non revolving non tilting four legged with armrest chair. Frame tube of SS 304 hollow section confirming to 1161. Seating material hot pressed plywood with PU foam. 0.0 nos each 1757

5 Supplying and placing almirah confirming to IS 3312 with overall dimesion of shelving 1855x910x480. all complete as per direction of engineer In Charge. 0.0 nos each 24497

Executive Engineer P. H. Division, Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Solar Photo Voltaic Power Generation System

S.N. Particulars Quantity Unit Rate Amount

1 Supplying, Installation, Testing and Commissioning of Grid Interactive roof top Solar Photo Voltaic Power Generation System including space frame etc all complete as per direction of E/I 0.0 KW P/KW 58480

Executive Engineer P. H. Division, Dhamdaha

TECHNICAL BID SHEET

NIT No. –Re-05/2025-26/SUBOFFC/BLDGN/(Gr. No.-03)

NAME OF WORK:- Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Estimated Cost:- 7280100

Time of Completion :- 9 Months

Sl No. Items Requirement Coloured cell to be filled by contractor

Name of the contractor

Address of the Contractor including Mob No

1 Earnest Money (A) As prescribed in Tender document duly pledged in Favour of Executive Engineer, P.H. Division, Dhamdaha.

Earnest money - Rs. 146000

2 Registration Paper of appropriate class , Govt. of Bihar

4 Latest sales tax registration in state of Bihar

5 Details of Tools and Plant ( approapriate ownership papers/ registered deed ) as per NIT

6 Affidavit from the notary certifying that the bidders/ contractor has completed 80%/OR more than 80%/completed the work previously awarded to him.

7 Work Experience of Similar nature as per NIT

8 Turn over last Five Years ( Performance Report of Last three Years/Details of Work Done Last three Years)

9 Availibity of Self Investment in prescribe format as per NIT

10 Availibility of credit facility as per clause as per NIT

11 Power of attorney / partnership deed/MOU of private limited company etc. if applicable.

12 Details of Skilled/Technical Staffs as per NIT

13 Character Certificate

TECHNICAL BID SHEET

NIT No. –Re-05/2025-26/SUBOFFC/BLDGN/(Gr. No.-03)

NAME OF WORK:- Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Estimated Cost:- 7280100

Time of Completion :- 9 Months

Sl No. Items Requirement Coloured cell to be filled by contractor

Name of the contractor

Address of the Contractor including Mob No

1 Earnest Money (A) As prescribed in Tender document duly pledged in Favour of Executive Engineer, P.H. Division, Dhamdaha.

Earnest money - Rs. 146000

2 Registration Paper of appropriate class , Govt. of Bihar

4 Latest sales tax registration in state of Bihar

5 Details of Tools and Plant ( approapriate ownership papers/ registered deed ) as per NIT

6 Affidavit from the notary certifying that the bidders/ contractor has completed 80%/OR more than 80%/completed the work previously awarded to him.

7 Work Experience of Similar nature as per NIT

8 Turn over last Five Years ( Performance Report of Last three Years/Details of Work Done Last three Years)

9 Availibity of Self Investment in prescribe format as per NIT

10 Availibility of credit facility as per clause as per NIT

11 Power of attorney / partnership deed/MOU of private limited company etc. if applicable.

12 Details of Skilled/Technical Staffs as per NIT

13 Character Certificate

GOVERNMENT OF BIHAR

PUBLIC HEALTH AND ENGINEERING DEPARTMENT

Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

ESTIMATED COST:

Name of Division: P.H Division, Dhamdaha

Name of Circle: P.H.E Circle , Purnea

GOVVERENTMENT OF BIHAR

PUBLIC HEALTH ENGINEERING DEPARTMENT

P. H. DIVISION, DHAMDAHA

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Summary of Estimated Cost

(Civil + PHE + ELE + FURNITURE )

Abstract of Cost

Sl. No. Particulars Estimated Amount (Rs.)

1 Cost for Civil Works (Ref. Summary Detail 1) :

2 Cost for Internal Water Supply & Sanitary Works (Ref. Summary Detail 2) :

3 Cost for Electrical Works (Ref. Work Detail 3) :

4 Fire Safety Arrangement (Ref. Work Detail 4)

5 Furniture (Ref. Work Detail 5)

6 Solar Photo Voltaic Power Generation System (Ref. Work Detail 6)

(Seventy Two Lac Eighty Thousand One Hundred Only)

Executive Engineer

P. H. Division, Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

ABSTRACT OF COST

S.No. Discription Amount

1 Construction of Proposed Office Building of Assistant Engineer, P.H Sub Division Dhamdaha under P.H Division Dhamdaha in the District of Purnea for year 2025-26. (As Per Approved Design & Drawing of Building submitted by Contractor)

(Seventy Two Lac Eighty Thousand One Hundred Only)

Executive Engineer

P.H. Division, Dhamdaha

Summery Datail 01

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Summary of Estimated Cost

Civil Works (Ref. Work Detail 1)

Sl. No. Particulars Total Estimated Amount (Rs.)

1 Concrete Works 76619.13542879625

2 Reinforced cement concrete works 2011371.6682690799

3 Masonary Works 618072.7838316287

5 Steel Works 230055.64255704178

6 Flooring Works 890244.5546184108

7 Plaster & Finishing works 518131.56480723835

8 Carriage of Materials 353678.8495

Total (Civil Works) : Rs. 4981721.914747836

Executive Engineer

P.H Division Dhamdaha

Quantity Detail 1

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Estimate of Quantities

Sl. No. Item No. L B H/D Qty. Unit

0.0 Plinth Area Calculation

Laboratory 1 sqm

Chemist room 1 sqm

Lab Store 1 sqm

Subdivisional store 1 sqm

JE Chamber 1 sqm

HER 1 0.000 0 sqm

PH Toilet 1 sqm

WC 2 0.000 0 sqm

0.0 Concrete work

2.1 Providing P.C.C (1:2:4) in Flooring Work 0 cum

Providing & Laying RCC M25 upto Plinth

Wall, Column, Pillar

Column Roof to Top

Mumty Column 4 2.85 cum

Parapet 20 0.25 cum

B/w Grid -A & B 2 cum

Grid -4 & 5 2 cum

deduction for column cum

deduction fo stair -1 0.135 cum

total Roof slab cum

RCC M25 in Lintel

D2 1 0.25 cum Chajja

Laboratory shelf 1 cum

RCC Band at Lintel etc. 1 0.25 cum

parapet band 1 cum

RCC Fins 1 0.6 cum

Waist Slab 2 cum

Landing Slab 1 cum

Steps 18 0.3 cum

3.3.2 RCC Above plinth

Roof Beam cum 1.6

Roof Slab cum 0.3

RCC M25 in Lintel cum -0.8

RCC Chajja cum 0.09

RCC Fins cum 0.1

RCC Stair cum -0.5

3.2 Reinforcement for RCC Work

Columns cum @ 150 kg/cum MT

Roof Beam cum @ 110 kg/cum MT

Roof Slab cum @ 80 kg/cum MT

Lintel cum @ 60 kg/cum MT

RCC Band at Lintel cum @ 60 kg/cum MT

RCC Chajja cum @ 60 kg/cum MT

Fins cum @ 60 kg/cum MT

Stair cum @ 105 kg/cum MT

10 mm dia. = 10

12 mm dia. = 20

16 mm dia. = 17

20 mm dia. = 15

3.1 Centring and Shuttering

3.1.3 Suspended Floor Roof Landing

Landing Slab sqm

3.1.4 Lintel Beam,

X - Direction 0.7 sqm

RCC M25 in Lintel 2 / sqm

3.1.5 Column, Pillar, Piers

Column Roof to Top

Mumty Column sqm

3.1.6 Stairs (excluding landing)

Landing Slab sqm

3.1.7 Vertical & Horizontal Fins sqm

3.1.8 Wheather shade chhajja / 0.075 sqm

3.1.9 Edges of slab

Extra for additional height in centring, shuttering wherever required with adequate bracing, propping etc. including cost of de-shutering and de centring at all levels over a height of 3.5 m ,for every additional height of 1 metre or part thereof (Plan area to be measured) sqm

0.0 Brick Works

4.2 Fly ash Brick work CM(1:4) in Super Structure

Grid -3,6 & 7 0 cum

Grid - A & C 0 cum

Grid -A & D 2 cum

B/ W Grid -C & D 1 0.999 0.25 cum

Grid -1 & 8 2 cum

Grid -3,4,5 & 7 4 cum

Mumty 1 0.25 cum

4.4 Extra for providing and placing in position 2 Nos, 6 mm dia cum

5.1 P/F Flush Door Shutter

5.2 P/F aluminium Sliding door bolt 300X16mm

5.3 P/F Aluminium tower bolt

5.4 P/F Aluminium pull bolt lock

5.5 P/F Aluminium handle

5.6 P/F Aluminium floor door stopper

5.7 Extra for providing lipping sqm

5.8 P/F wooden moulded beading mtr.

0.0 Steel Works

6.1 P/F Steel glazed window

6.2 P/F Presed Steel door frame

6.3 P/F MS Fan Clamp. 1 x 18 Nos.

6.5 P/F MS Grill to window sqm @ 12 kg/sqm kg

6.7 P/F steel work in built up section

Gate 1 3.05 sqm

0.0 Flooring Work

7.2 Extra for providing and fixing 30 mm x 4 mm glass strips

Bed room 14 mtr.

Sleepout 5 mtr.

Stair case 5 mtr.

First Floor Same as Gr. Floor mtr.

7.2.1 Vetrified Tiles 600x600mm in Flooring

7.3.1 Vitrified Floor Tiles in Flooring

Chemist room sqm

Subdivisional store sqm

7.2.2 Vetrified Floor Tiles in Skirting

Ground Floor 2.15

7.3.2 Vitrified tiles in Skirting

Laboratory 0.1 sqm

Hot Room 0.1 sqm

Chemist room 0.1 sqm

Lab Store 0.1 sqm

Subdivisional store 0.1 sqm

JE Chamber 0.1 sqm

Corridor 0.1 sqm

7.4 P/F Ceramic floor tiles

7.5 Providing and fixing 1st quality ceramic glazed wall tiles

PH Toilet 1.8 sqm

7.6 Granite stone flooring

Staircase 1 sqm

Landing Slab sqm

Steps riser 0.15 sqm

StepsTreads 0.3 sqm

Staircase 0.1 sqm

Landing Slab 0.1 sqm

StepsTreads 0.1 sqm

Entrance 0.1 sqm

7.7 Extra for edge molding sqm

0.0 Plaster and finishing work

8.1 Providing 12mm cement plaster (1:6)

Chemist room sqm

Subdivisional store sqm

Deduction door window

Parapet 1 1.05 sqm

8.2 Providing 15mm cement plaster (1:3) External Wall

Outer wall 1 sqm

Qty vide item 3.1.8 sqm

Deduction window

8.3 Providing 6mm cement plaster (1:4) with clean coarse sand Celling

Chemist room sqm

Subdivisional store sqm

Terrace mumty sqm

Chajja same as item 3.1.8 sqm

Landing Slab sqm

8.4 Providing and applying wall putty of 2 mm thick

Total Qty ,+ sqm

8.5 Providing two coats of oil bound distemper

Internal plaster sqm

8.6.1 Providing two coats of synthetic enamel paint over a coat of primer over new

Wooden surface 2 sqm

8.6.2 Providing primer of red lead paint one coat over new

Steel surface same as item 5.1 sqm

8.7 Providing two coats of synthetic enamel paint over steel surface + sqm

8.8 Forming grooves of uniform size 1 mtr.

EXT. WALL 1 mtr.

8.9 Providing 1.5mm neat cement punning 1 0.6 sqm

8.1 Acrylic smooth extrier Pant Qty as per item no 8.2 sqm

Executive Engineer

P.H Division Dhamdaha

9 Carriage of Materials

Qnty Cement (Tonnes) Bricks (Nos) Coarse sand (cum) Stone chips (cum) Local sand (cum)

4 masoonary work in CM (1:6)

5 half masonary work in CM(1:4)

7 Vetrified Tiles flooring 0

8 Vetrified tiles in skirting 0

9 Vitrified flooring

10 vetrified tiles in skirting

14 Ceramic glazed tiles in dado

15 Ceramic glazed Wall tiles

17 15mm CP in 2 layer

Tonnes Nos Cum Cum Cum

Executive Engineer

P.H Division Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Estimate of Cost

(Civil Works) ( (Ref. Quantity Detail 1)

Items Covered Under BCD-SOR-2022, effective from 01.01.2022

Sl. No./ Code. SOR-22 Description of Work Unit Qty. Rate (Rs.) Amount (Rs.)

0.0 Concrete Work

2.1/ 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.

2.1.1/ 4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) cum 3998.1

2.2/ 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufactures. Per 50 kg Cement 0

Sub Total '2' (Concrete Work) : Rs.

Sub Total '2' (Concrete Work) :

0.0 Reinforced Cement Concrete Works

3.1/ 5.9 Centring and shuttering including strutting, propping etc. and removal of form for:

3.1.3/ 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 437.5

3.1.4/ 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 404.7

3.1.5/ 5.9.6 Columns, Pillars, Piers, Abutments, Post and struts sqm 494.4

3.1.6/ 5.9.7 Stairs, (excluding landings) except spiral staircases. sqm 439.9

3.1.7/ 5.9.13 Vertical and Horizontal fins individually or forming box louvers band, facias ane eaves boards. sqm 0.00_);\(0.00\)

3.1.8/ 5.9.19 Wheather shade, Chajja, corbels etc., including edges. sqm 550.9

3.1.9/5.11.1 Suspended floors, roots, laning, beams and balconies (Plan area to be measured) sqm 174

3.1.9/ 5.9.16.1 Edges of slabs and breaks in floors and walls :

Under 20 cm wide Metre 0.99_);\(0.99\)

3.1.10/ 5.22 Reinforcement for RCC work including straightening. Cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars

3.3/ 5.33. Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength and admixtures in recommended proportions as per IS: 9103 to accelerate,reinforcement,durability as per direction of Engineer-incharge.

3.3.2/ 5.33.2 All work from plinth level upto floor V level. cum 5863.2

Sub Total '3' (RCC Work) : Rs.

Sub Total '3' (RCC Work) :

0.0 Masonary Work

4.1/ 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :

4.1.1/ 6.1.14C Cement mortar 1:6 (1 cement: 6 coarse sand ) - 250 mm th Brick work cum 4923

4.1.2/ 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :

4.1.2/ 6.1.12C Cement mortar 1 : 4 (1 cement : 4 coarse sand)- 125 mm th Brick work cum 5116.3

4.2/ 6.3C Extra for Brick work in superstructure above plinth level upto floor V cum

4.2.1 250 mm th Brick work in C.M (1:6) cum 842.2

4.2.2 125 mm th Brick work in C.M (1:4) cum 842.2

4.4/ 6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks)

Sub Total '4' (Brick Work) : Rs.

Sub Total '4' (Brick Work) :

5.1/ 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:shutters:

5.1.1/ 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 1775.3

5.2/ 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

5.3/ 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete:

5.4/ 9.98 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. each 0.00_);\(0.00\)

5.5/ 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

5.6/ 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper each 60.8

5.7/ 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) Sqm 401.4

5.8/ 9.40 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

Sub Total '5' (Wood Work) : Rs.

Sub Total '5' (Wood Work) :

6.1/ 10.12.1 Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required.

6.2/ 10.15 Providing and fixing pressed steel door frame confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by . mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

6.3/ 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing each 165.4

6.4/ 10.32.2 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works kg. 114.6

6.5/ 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

6.6.1/ 9.48.1 Fixed to steel windows by welding. kg. 144.5

Sub Total '6' (Steel Work) Rs.

Sub Total '6' (Steel Work)

0.0 Flooring work

7.2/ 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to ben specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joint with white cement and matching pigments etc., complete

11.41.2 Size of Tile 600x600 mm metre 0

7.3.2/ 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

11.41.3 Size of Tile 80x80 cm sqm 2116.5

7.4/ 11.46 Providing and laying Vitrified tiles in different sizes (thickness to bem specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.

7.4.2/ 11.46.3 Size of Tile 800 x 800 mm. sqm 1658

7.5/ 11.39 Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturer) of 1 st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours such as white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. sqm 1329.8

9.6/ 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Motar 1:3 (1cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 795

8.9/ 11.32 Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length Sqm 0

8.10/ 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab. Metre 0 0.99_);\(0.99\)

11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 3605.2

8.3 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- Charge.e.

8.3.2 Granite work m 0.00_);\(0.00\)

7.3.2/ 11.3 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

Sub Total '7' (Flooring Work) : Rs.

Sub Total '7' (Flooring Work) :

0.0 Plaster & Finishing Works

8.1/ 13.11 12 mm cement plaster of mix

8.1.1/ 13.11.4 1:6 (1 cement : 6 coarse sand) sqm 141.5

8.2/ 13.12 15 mm cement plaster on rough side of single or half brick wall of mix.

8.2.1/ 13.12.2 1:4(1 cement: 4 coarse sand ) sqm 176.4

8.3/ 13.24 6 mm cement plaster to ceiling of mix.

8.3.1/ 13.24.2 1:4 (1 cement : 4 coarse sand) sqm 125.6

8.4/ 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 105.4

8.5/ 13.77 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.

8.5.1/ 13.77.2 New work (two or more coats) over and including priming coat with cement primer. sqm 102.3

8.6/ 13.81 Applying priming coat:

8.6.1/ 13.81.1 With ready mixed pink or grey primer of approved brand and manufacture on woodwork (hard and soft wood) sqm 0.00_);\(0.00\)

8.6.2/ 13.81.3 With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works sqm 34.6

8.7/ 13.93 Painting with synthetic enamel paint of approved brand and manufacture to give an even shed.

13.93.1 Two or more coats on new work sqm 84.5

8.8/ 13.116 Forming groove of uniform size from 12 x 12 mm and upto 25 x 15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-charge. Metre 47.1

8.9/ 13.26 Neat Cement punning Sqm 40.5

8.10/ 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.46.1 New work (Two or more coat applied @ 1.67 Ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm) Sqm 137

Sub Total '8' (Finishing Works) : Rs.

Sub Total '8' (Finishing Works) :

0.0 Carriage of Materials

(I) Bricks per 1000 nos

(ii) Coarse Sand cum

(iii) Stone Chips cum 1746.29

(iv) Local sand cum 310.45

Sub Total '13' (Carriage of Materials): Rs.

0.0 Difference in cost of Materials

(i) Cement bag 616

(ii) Bricks per 1000 nos 30784

Sub Total '12' (Difference in cost of Materials): Rs.

Executive Engineer

P.H Division Dhamdaha

Summery Datail 02

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Office Building

Summary of Cost

(P.H.E. Works) ( (Ref. Work Detail 2)

Sl. No. Particulars Estimated Amount (Rs.)

0.0 WATER SUPPLY WORKS :

0.0 SANITARY INSTALLATION :

Executive Engineer

P.H Division Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Office Building

Estimate of Cost

Item covered Under BCD-S.O.R. 2022, Govt. of Bihar

Sl. No. SOR Code Description of Work building Unit Qnty. Rate (Rs.) Amount (Rs.)

WATER SUPPLY WORKS

0.0 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(internal work)

Exposed on walls

1.1 18.7.3 25 mm nominal outer dia Pipes 42 Metre 317.3

1.2 18.7.5 40 mm nominal outer dia Pipes 20 Metre 538.4

0.0 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

2.1 18.8.1 15 mm nominal outer dia Pipes 30 Metre 278.2

2.2 18.8.2 20 mm nominal outer dia Pipes 42 Metre 350

0.0 Providing and fixing brass stop cock of approved quality (screwed end).

3.1 18.16.1 15mm nominal bore 12 Each 303.8

0.0 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end).

4.1 18.17.1 25mm nominal bore 2 Each 532.6

4.3 18.17.3 40mm nominal bore 1 Each 707.3

0.0 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end)

5.1 18.19.2.1 25mm nominal bore

Horizontal 1 Each 506.6

0.0 Providing and fixing P V C connection pipe with brass unions.

6.1 18.21.2.1 45 cm length

15 mm nominal bore 12 Each 85.2

0.0 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc.complete (new work)

9.1 18.46.1 15 mm nominal bore 2 Each

9.2 18.46.2 20 mm nominal bore 2 Each 185.6

9.3 18.46.3 25 mm nominal bore 4 Each

9.5 18.46.5 40 mm nominal bore 4 Each 419.7

0.0 18.49 Providing and fixing C.P. brass,bib cock of approved quality conforming to IS : 8931 6 Each 434.2

0.0 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS stamdards and weighing notless than 810 gms.

11.1 18.50.1 15 mm nominal bore 2 Each 715.1

0.0 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS stamdards and weighing notless than 690 gms.

12.1 18.51.1 15 mm nominal bore 2 Each 708.4

0.0 Providing and fixing C.P brass stop cock (concealed) of standard design and of approved mark conforming to IS:8931

13.1 18.52.1 15mm nominal bore 6 Each

0.0 Providing and fixing C.P brass angle valve for basin mixer and gyser points of approved quality conforming to IS: 8931

14.1 18.53.1 15mm nominal bore 6 Each 500.4

0.0 18.65 Providing and fixing PTMT Soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 6 Each 96.8

0.0 18.76 Cutting holes up to 30 x 30 cm in walls including making good the same:

16.1 18.76.1 With common burnt clay F.P.S. (non modular) bricks 8 Each 198.5

0.0 18.77 Cutting holes up to 15 x 15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) including finishing complete so as to make it leak proof. 8 Each 217.1

0.0 18.79 Making holes up to 20 x 20 cm and embedding pipes upto 150 mm in diametre in masonary and filling with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) including dispopsal of malba. 8 Each 115.7 2

total (Water Supply works) : Rs.

Sub total (Water Supply works) : Rs.

SANITARY INSTALLATION

0.0 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

19.1 17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 2 Each 2369.9

0.0 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 4 Each 1500

0.0 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.

21.1 17.28.2.2 Flexible pipe

40 mm dia 6 Each 6

0.0 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comelete. 6 Each 1068.5

0.0 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete 6 Each 713.3

0.0 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

24.1 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm an effective height of 88 mm, weighthan 190 gms 6 Each 424

0.0 17.35 Providing and fixing soil, waste and vent pipes :

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 25 Metre 25

0.0 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron / Cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone agregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.

26.1 17.37.1 For 100 mm dia pipe 22 Each 178.5

0.0 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick bolts and nutts complete

Sand cast iron S&S as per IS - 3989 6 Each 597.6

0.0 Providing and fixing plain bend of required degree

Sand cast iron S&S as per IS - 3989 12 Each 439.7

0.0 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts & nuts complete.

Sand cast iron S&S as per IS - 3989 12 Each 731.4

0.0 17.56 Providing and fixing terminal guard

Sand cast iron S&S as per IS - 3989 12 Each 439.7

0.0 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter

0.0 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

32.1 17.60.1.2 Sand Cast Iron S&S as per IS: 1729 8 Each 928.5

0.0 17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

33.1 17.65.1 100 mm diameter pipe 59 metre 46.1

0.0 12.78 Providing and fixing on wall face unplasticised PVC (working pressure 4 kg per sqcm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

34.1 12.78.2 110mm diameter 45 Metre 257.5

0.0 12.79 Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised-PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

35.1 12.79.2.2 Single pushfit Coupler:

110mm 12 Each 374.5

35.2 12.79.3.2 Single tee with door

110x110x110mm 6 Each 193.4

110mm bend 12 Each 132

35.4 12.79.6.2 Shoe plain

110mm Shoe 8 Each 115.95

0.0 12.80 Providing and fixing unplasticised-PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S screws or required length including cutting brick work and fixing on cement mortar (1:4) 1 cement:4 coarse sand and making good the wall etc. complete.

0.0 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. 12 Each 47.9

0.0 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

38.1 17.1.1 White Vitreous china Orissa Pattern W.C pan of size 580x440mm with integral type foot rests. 2 Each

0.0 17.2 Providing and fixing white vitreous china pedastal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

39.1 17.2.1 W.C pan with ISI marked white solid plastic seat and lid. 4 Each 4230

0.0 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105gms. 6 Each

0.0 17.5. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass lush pipe,spreaders with unionsand clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I.trap with outlet grating and other couplings in C.P. brass, includingpainting of fittings and cutting and making good the walls and floors wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 2 Each 6469

0.0 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 P/L

0.0 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distances of 37mm fromwall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 90 gms. 4 Each 204.7

Sub total ( SANITARY INSTALLATION) : Rs.

Sub total ( SANITARY INSTALLATION) : Rs.

Executive Engineer

P.H Division Dhamdaha

Name of Work- Construction of Office Building for Assistant Engineer at P.H. Sub Division, Amas (Including Civil Works, PHE works, Electrification works, Site Development & Procurement of furnitures & furnishing) in district Gayaji under P.H. Division, S

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

INTERNAL ELECTRIFICATION OF SUB DIVISIONAL BUILDING

Items Covered Under BCD-Electrical SOR-2023

Sl. No. SOR Code. Description of Work Unit Qty. Rate (Rs.) Amount (Rs.)

Electrical Works

1 Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FR PVC insulated copper conductor cable in recessed PVC conduit with modular type switch , modular plate, suitable size GI box etc as required.

1.3.3 Group C Point 22

2 Supplying and fixing suitable size GI box with modular plate and cover in recess including providing and fixing modular type 3 pin 5/6 amps socket outlet & 6A switch connection etc. as required. Each 19

3 Supplying and fixing of suitable size GI box with modular plate and cover in recess including providing and fixing modular 6 pin 15/16 amp socket outlet &15/16 amp modular switch including connection,painting etc as required Each 15

4 Wiring for light/ power plug plug with 2 X 4 sq. mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required meter 56

5 Supplying and fixing 2 pin, 6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Each 23

6 Supplying and fixing Batten/angle holder on the exisiting jucction box/pvc box including connection etc. as required. Each 19

7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 29

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 25

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 22

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 19

1.7.12 4 X 10 sq. mm + 1 X 10 sq. mm earth wire Meter 15

8 1.15 Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required

1.15.1 1 X 1.5 sq. mm Meter 26

9 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. Each 2

10 2.31.1 Supplying and fixing following rating and pole, 24A/415 volts, MCB type changeover in the existing MCB DB complete with connections, testing and commissioning etc. Each 4

11 AR Supplying and fixing Suitable G.I box with modular plate & cover in front of surface or in recess including providing and fixing 4 nos. 3 pin 5/6 amps modular socket outlet & 4 nos 5/6 amps modular switch, connnection etc as required.( Use for computer point) Each 6

12 Supplying and fixing following way, horizontal type,three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.9.1 4 way ( 4 + 12 ), double door, horizontal type Each 1

13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 Amp. To 32 Amp. SP MCB Group-B 240 Volt Each 6

2.12.7 50/63 Amps, Tripole pole and neutral Each 3

14 0.9 Supplying and fixing 70112 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete u.,ith integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 8

15 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.6 15 watt LED lamp Each 8

16 5.11 Supplying and fixing wall mounted light bracket/ fixture made with polycarbonate suitable for single 9/10 watt LED lamp directly on wall including connections etc as required. ( But without lamp ) Each 12

17 Supplying and fixing following types aluminium extruded suspended type LED luminaire with minimum efficacy 100 lm/w ensuring uniform and continuous illumination including suspension system complete with electronic driver etc and connection with 1.5 sq.mm FRLS pVC insulated copper conductor cable etc as required.

5.6.2 4' long X 35/40 watt Each 4

18 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

5.14.4 90 watt Each 1

19 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ CFL street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. Each 2

20 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 6

21 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc.as required. Each 6

22 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage,connection, testing and commissioning etc as required.

8.17.1 300 mm sweep Each 1

23 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.). sqft 4

24 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required'

2.4.3 160 Amp, 36 KA, FPMCCB Each 1

2.4.18 500 Amp, 35 KA, TPMCCB Each 1

25 Providing and fixing following capacity four pole ONload/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

2.7.6 200 Amp, four pole Each 1

26 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.7 40/63 Amps, Tripole pole and neutral Each 6

27 AR Supplying and fixing Copper strips 50x5mm sizefor busbar including inter connection etc as required per kg 9

28 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. each 1

29 AR Supplying and fixing Pilot lamp for indication. each 2

30 AR Supplying and drawing of following size of ISI marks FR PVC insulates singke core copper conductor cable for inter connection of main switch/ busbar main switch etc as required.

4 X 16.0 sq. mm mtr. 9

31 AR Supplying of following size& core PVC XLPF insulated Sheathered unmounted electrical cable with aluminium conductor for working voltage upto 1.1 kv as required

185 sq. mm 3.5 core mtr. 10

32 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required

7.1.3 Above 95 sq. mm and upto 185 sq. mm mtr. 16

33 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. Set 1

34 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. mrt 19

35 AR SITC of OPR Early steamer emission (ESE) lighting protection along with Accessaries . Make ABB/ Hakel/ LPL etc all complete as required each 1

36 AR SITC of mounting mast to hold early steamer emission OPR 45 of rubust design with guy wire & base plate along with Accessaries . Make ABB/ Hakel/ LPL etc all complete as required each 1

37 AR Supply of OPP flash light counter working electromechanically without any power supply Make ABB/ Hakel/ LPL etc all complete as required each 1

38 AR Supply & instalation of 25 x 3 mm copper down conductor with all Accessory Make ABB/ Hakel/ LPL etc all complete as required mtr 16

39 AR SITC test clamp manufactured from high quality alloy of copper for excellent corrosion resistance Make ABB/ Hakel/ LPL etc all complete as required mtr 1

40 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for eafth electrode to fill up the excavated earth and earth inspection pit etc. as required. per set 1

41 Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in theexisting metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc. as required.

2.1.5 63 Amp, TP&N each 1

42 AR Supplying of following size & core PVC XLPF insulated Sheathered unmounted electrical cable with aluminium conductor for working voltage upto 1.1 kv as required

25 sq. mm 3.5 core mtr. 15

Add factor of 0.0536 for 18% GST instead of 12%

Total with GST factor

43 GeM Providing and installing 1.5 Ton Split wall mount AC of % star rating ISEER value>=5 to <=5.5 inverter AC- variable speed. Cooling capacity 4750-5800, copper condenser,synthetic air filter,refrigerant GWP 675(R32),refrigerant ozone layer depletion Zeroetc with necessary accessories all complete as per direction of engineer in charge. no 1

44 GeM Providing and installing Inverter heavy duty 1.2 KVA with warranty of 2 years all complete as per direction of engineer in charge. no 1

45 GeM Providing and installing stabilizer 5kva Input voltage range Single Phase Sine wave (90V-300V) with 36 month warranty all complete as direction of engineer in charge no 1

46 GeM Providing and fixing RO water purification system having all the necessary components such as pressure pump, filters, water tank, suitable hot / cold / normal water dispensing arrangement, control system etc as applicable to provide safe drinking water as per IS 10500 and as per IS 16240 with 15L/hr purification capacity. no 1

47 GeM Tubular Battery for Home, Office & Shops 200Ah Recyclable and Reliable Inverter Battery no 1

Executive Engineer

P. H. Division, Sherghati

Fire Safety Arrangement

S.N. Code No. Particulars Quantity Unit Rate Amount

Downcomer System

1- 2.28 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

1.1/ 2.32 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

9.1 Single headed Gunmetal 0.0 set each 7245

2- 11.72 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

11.3 65 mm dia 2 set each 3864

2.1- 4.1.4 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm no minal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. "Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket."

17.1 30 meters 2 set each 7920

TOTAL Fire safety

Executive Engineer

P. H. Division, Dhamdaha

Executive Engineer

P.H Division Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

FURNITURE & FURNISHING

S.N. Particulars Quantity Unit Rate Amount

1 Supplying and placing GODREJ INTERIO Grandeur main table of size 1800x900x730 with ERU. Under structure of main table should have gable end modesty panel. Modesty panel should be made of prelaminated MDF board. Thickness of table top should be 40mm thick and thickness of gable end should be 18mm. It should have keyboard tray with telescopic channel. and two set of movable drawer units with locking system with 3 sets of keys foe each drawer unit. (AE Chamber) 0.0 nos each 112520

2 Supplying and placing GODREJ INTERIO Modular Table with Particle Board Table Top and Metal Understructure 0.0 nos each 36511

3 Supplying and placing GODREJ INTERIO Revolving Chair with Active biosynchro mechanism 0.0 nos each 38132

4 Supplying and placing non revolving non tilting four legged with armrest chair. Frame tube of SS 304 hollow section confirming to 1161. Seating material hot pressed plywood with PU foam. 0.0 nos each 1757

5 Supplying and placing almirah confirming to IS 3312 with overall dimesion of shelving 1855x910x480. all complete as per direction of engineer In Charge. 0.0 nos each 24497

Executive Engineer P. H. Division, Dhamdaha

Name of Work : Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Solar Photo Voltaic Power Generation System

S.N. Particulars Quantity Unit Rate Amount

1 Supplying, Installation, Testing and Commissioning of Grid Interactive roof top Solar Photo Voltaic Power Generation System including space frame etc all complete as per direction of E/I 0.0 KW P/KW 58480

Executive Engineer P. H. Division, Dhamdaha

P.H. DIVISION, DHAMDAHA

FINANCIAL BID SHEET

NIT NO. -Re-05/2025-26/SUBOFFC/BLDGN/(Gr. No.-03)

NAME OF WORK:- Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

Date of Tender :- 31.12.2025

Estimated Cost:- 7,280,100.00

Earnest Money (In specified mode only):- 146,000.00

Time of Completion :- 09 Months

Cost of BOQ (In specified mode only):- Departmental Cost-10,000.00( online)

NAME OF WORK:- Construction of Proposed Office for Assistant Engineer, Dhamdaha under P. H. Division, Dhamdaha including all services etc. all complete as per the specification and direction of EIC.

S.N. Particulars Qty Unit Rate Amount

1 Construction of Proposed Office for Assistant Engineer, Banmankhi under P. H. Division, Dhamdaha including all services, amenities, boudary wall, other site developmental works etc. all complete as per the specification and direction of EIC. AS PER SUB-BOQ attached. 1 Each Rs. 7,280,100.00 Rs.7,280,100.00

Total Rs.7,280,100.00

Gross Total Rs.7,280,100.00

TO BE FILLED BY CONTRACTOR

1 Estimated cost (in Rs.)- 7,280,100.00

2 Name of the Contractor-

3 Address of the Contractor (including Mob No & Email Id)-

4 I/we offer in Figures……. in words………………… % (Percentage) High / Less/Estimated rate mentioned in the Bill of quantity in Fig

5 Cost of construction after above/below

Sighn Of contractor

Sub Estimate No-4

Estimate for construction of PCC Drain (100mmx100mm) in ordinary Tubewell.

Sl. No. PARTICULARS QTY. UNIT RATE (in `) AMOUNT (in `)

1 2.8.1 Earth work in excavation (soil Item-A) and disposal of excavation earth as obtained to a distance upto 50m including all lifts, leveling ramming as for platform. 10.00m x 0.26m x 0.15m = 0.39m3 0.39 M3 P/M3 360.70 140.67

2 2.28 Providing local sand in filling in foundation trenches or in plinth including ramming and waiting in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as sper specification and direction of E/I 10.00m x 0.26m x 0.10m = 0.260 m3 0.26 M3 P/M3 287.30 74.70

3 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per specification ans diraction of E/I For platform 10.00m x 0.26m = 2.6m2 2.60 M2 P/M2 283.30 736.58

4 4.1.3 Providing PCC (1:2:4) M-150 in foundation with approved quality for stone chips 20mm to 6mm size wit clean coarse sand including all cost screening, mixing and placing in position with curing, taxes and royality all complete job as per specification and direction of E/I Drain 10.00m x 0.26m x 0.075m = 0.195m3

5 13.17.1 Providing 12mm cement plaster (1:4) with clean coarse sand including neat cement punning all cost of water, curring, taxes and royality all complete as per specification and direction of E/I 1 x 10 x 0.10 = 0.10 M2

6 4.3.1 Providing centring and shutting including removal of form work 2nos x 10.00m x 0.20 = 4.00m2 4.00 M2 P/M2 211.10 844.40

7 Carraige of Materials -

(a).Local Sand (Lead 3 km) 0.26 M3 P/M3 262.05 68.13

(b) Bricks - Lead (1km kutchha+7km Pucca) 90 nos per‰ nos 836.38 75.27

(d) Stone Chips - Lead (232 km) 0.352 M3 P/M3 2473.39 870.63

Total cost of Ten Metre Drain 5864.40

Total Cost of One Metre Drain 586.44

Rate per m (Say `) 586.00

Junior Engineer Assistant Engineer Executive Engineer

P.H. Division, Purnea