1) Electrical General work for " Upgradation and modernisation of Bandel goods shed under Sr.DEN(1)/HWH" 2) Electrical General work for "Srirampur - Upgradation and modernisation of Srirampur goods shed under Sr.DEN(1)/HWH" 3) Electrical (general) work for "Upgradation and modernisation of Bhadreswar Ghat goods shed under Sr.DEN(1)/HWH 4) Electrical General work for "Upgradation and modernisation of Tarakeswar goods shed under Sr.DEN(1)/HWH". 5) Electrical General work for "Upgradation and modernisation of Magra goods shed under Sr.DEN(1)/HWH". 6) Electrical General work for "Upgradation and modernisation of Bally Goods shed under Sr.DEN(1)/HWH".

A- 1) NAME OF THE WORK :- Electrical General work for " Upgradation

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe (PE-100 grade, PN-10 or higher). ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 2 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe (PE-100 grade, PN-10 or higher) without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 100 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps including supply of suitable size GI Clamp and GI nut-bolts and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 9 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 10 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section with minimum bottom diameter 450 mm or higher. The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction 11 of mast complies with BS EN 10 025 of appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 12 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum 13 sheet thickness - 3mm ) Pole of overall length 7 M with four / five / six arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 14 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 15 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED outdoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street light fitting will be supplied by Railway )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 19 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 20 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 21 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 22 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 23 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 24 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 25 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 26 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 28 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper 29 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 6A/16A 3 pin socket and plug with indicating light and all other associated work. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Extra cost involvement for modular switch, bell push, plug socket, fan regulator, USB point, TV socket etc. with other accessories ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Installation, connection and commissioning of Wall Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( AC Wall Bracket Fan will be supplied by Railway )

Installation, connection and commissioning of Air Circulator Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( Air Circulator Bracket Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure with Metal Door ), 8 way, 50Hz, complete with 4 38 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 300mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure with Metal Door ), 3Ph, 4 way per phase, 415V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 300mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole 42 - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. d) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF, TRIP " indication for all incoming and outgoing feeders - 10 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) 44 MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 100 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories. ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S)

Fixing, connection,testing and commissioning of above busbar including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) 46 MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 200 Amp, 6 way, suitable for 415V, 50Hz supply system including all accessories. ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S)

Fixing, connection,testing and commissioning of above busbar including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

LT cubicle Outdoor Type Wall Mounted Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Microprocessor Release of breaking capacity 36kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory, suitable for Release Range ( 63-160 ) Amp, 4 Pole - 2 nos. b) MCCB, 4 Pole,125 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. c) MCCB with Microprocessor Release of breaking capacity 36kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory, 48 suitable for Release Range ( 16-40 ) Amp, 4 Pole - 6 nos. d) Tinned Copper Busbar ( 4 Bar ) each of capacity 150 Amps., 415V, 50 Hz - 1 set e) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. f) CT of suitable ratio for MFM - 24 nos. g) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 33 nos. h) Petty Store for control cable, MCBs, All incoming and outgoing Cable glands, sockets, fuse, push button, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 jobi) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus /Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 100 KVA to 125 KVA Load :- a) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. c) MCCB, 4 Pole, 160 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. d) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 2 nos. e) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) Tinned Copper Busbar (4 Bar) each of capacity 300 Amps., 415V, 50 Hz. - 1 set. g) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 6 nos. h) CT of suitable ratio for MFM - 18 nos. i) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 38 nos. j) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. k) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus /Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 52 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by 54 ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Supply of energy efficient bore well submersible pump-motor set of pump discharge capacity approx.1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other accessories such as suitable length 3 core flat copper conductor cable of size 1.5 sq.mm, 1100 Volt 55 grade ( motor to starter panel ), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indications etc.including installation, testing and commissioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of GI column pipe - Tata / Jindal / Bansal ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel ) ( Make of pump-motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Supply of energy efficient bore well submersible pump-motor set of pump discharge capacity approx.1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other 56 accessories such as suitable length 3 core flat copper conductor cable of size 1.5 sq.mm, 1100 Volt grade ( motor to starter panel ), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indications etc. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of GI column pipe - Tata / Jindal / Bansal ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel ) ( Make of pump-motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Installation, testing and commissioning of above Submersible Pump-Motor set with column pipe and all other accessories.

Supply of energy efficient submersible Pump Motor set in multistage construction of maximum discharge 5000 GPH at 57M head with AC induction motor of suitable capacity for operation on 3 Phase, 415V, 50Hz, AC supply system complete with all accessories such as suitable length of 3 58 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one flow meter, one delivery sluice valve one Non-Return Valve, one pressure gauge and all other accessories. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel )

Installation, testing and commissioning of Submersible Pump-Motor set ( 5000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with DOL 60 Starter suitable for 7.5 KW / 10 HP, 3Ph, 415V, 50Hz ( 5000 GPH x 57 M head ) pump motor with Electronic Over Current Relay, single phase preventer with Ammeter & Voltmeter ( Make of pump- motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Fixing, connection, testing and commissioning of above Submersible Pump Controller with suitable arrangement.

Supply of Supporting Clamps for holding column pipe made of GI flat of size 400mm x 100mm x 12mm along with GI nuts and bolts

Supply of heavy gauge GI pipe of dia 50mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary massonary work.

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 66 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

B- 2) NAME OF THE WORK :- Electrical General work for "Srirampur -

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 67 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 68 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 69 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 70 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper 71 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 6A/16A 3 pin socket and plug with indicating light and all other associated work. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 73 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 76 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 77 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 78 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 79 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED outdoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure with Metal Door ), 8 way, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 300mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure with Metal Door ), 3Ph, 4 way per phase, 87 415V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 300mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 100 89 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S)

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 450 x 375 x 200 mm ( IP-55 ) / equivalent dimension heavy duty, Outdoor type, UV ray protected, self fire- 90 extinguishing, shock resistance IK08 or above and IP65 degree of protection grade transparent polycarbonate DB box including fitment with suitable size and shape Mild Steel ( MS ) bracket, testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / Grasp / ABB / Legrand / Spelsberg / EPP Composites )

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum 91 sheet thickness - 3mm ) Pole of overall length 7 M with single / double / four arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 92 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 93 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe (PE-100 grade, PN-10 or higher). ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 96 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe (PE-100 grade, PN-10 or higher) without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps including supply of suitable size GI Clamp and GI nut-bolts and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 103 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 104 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 100 KVA to 125 KVA Load :- a) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. c) MCCB, 4 Pole, 160 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. d) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, 105 "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 2 nos. e) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) Tinned Copper Busbar (4 Bar) each of capacity 300 Amps., 415V, 50 Hz. - 1 set. g) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 6 nos. h) CT of suitable ratio for MFM - 18 nos. i) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 38 nos. j) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job.k) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus /Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of 107 LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job.l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus /Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V 109 AC, 50Hz of capacity 25-32A / 32-40A / 40- 50A, 4 Pole complete with metal enclosure with spreader terminals, including fixing, connection, testing and commissioning. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section with minimum bottom diameter 450 mm or higher. The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction 110 of mast complies with BS EN 10 025 of appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 111 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole 112 - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. d) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF, TRIP " indication for all incoming and outgoing feeders - 10 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories

Supply of energy efficient submersible Pump Motor set in multistage construction of maximum discharge 5000 GPH at 57M head with AC induction motor of suitable capacity for operation 114 on 3 Phase, 415V, 50Hz, AC supply system complete with all accessories such as suitable length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one flow meter, one delivery sluice valve one Non-Return Valve, one pressure gauge and all other accessories. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel )

Installation, testing and commissioning of Submersible Pump-Motor set ( 5000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with DOL 116 Starter suitable for 7.5 KW / 10 HP, 3Ph, 415V, 50Hz ( 5000 GPH x 57 M head ) pump motor with Electronic Over Current Relay, single phase preventer with Ammeter & Voltmeter ( Make of pump- motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Fixing, connection, testing and commissioning of above Submersible Pump Controller with suitable arrangement.

Supply of energy efficient submersible Pump Motor set in multistage construction of maximum discharge 10000 GPH at 54M head with AC induction motor of suitable capacity for operation on 3 Phase, 415V, 50Hz, AC supply system complete with all accessories such as suitable 118 length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one flow meter, one delivery sluice valve one Non-Return Valve, one pressure gauge and all other accessories. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel )

Installation, testing and commissioning of Submersible Pump-Motor set ( 10000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with Fully 120 Automatic Star-Delta Starter suitable for 11 KW / 15 HP, 3Ph, 415V, 50Hz ( 10000 GPH x 54 M head ) pump motor with Electronics/ Pneumatic Timer and Electronic Over Current Relay, single phase preventer with Ammeter & Voltmeter including installation, fixing, connection and commissioning. ( Make of pump-motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Installation, fixing, testing and commissioning of above starter by suitable size GI clamps and nut-bolts

Supply of Supporting Clamps for holding column pipe made of GI flat of size 400mm x 100mm x 12mm along with GI nuts and bolts

Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 75mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 100mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Centrifugal Self Priming Mono Block Pump with capacity 1.1 KW/1.5 HP suitable for operation in 1 Ph, 220-250V, 50 Hz supply including Installation, testing and commissioning.

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary massonary work.

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent 128 Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 129 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

C-3) NAME OF THE WORK :- Electrical (general) work for "Upgradation

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe (PE-100 grade, PN-10 or higher). ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 131 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe (PE-100 grade, PN-10 or higher) without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 100 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps including supply of suitable size GI Clamp and GI nut-bolts and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 138 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 139 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section with minimum bottom diameter 450 mm or higher. The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction 140 of mast complies with BS EN 10 025 of appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 141 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum 142 sheet thickness - 3mm ) Pole of overall length 7 M with single / double / four arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 143 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 144 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED outdoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street light fitting will be supplied by Railway )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 148 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 149 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 150 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 151 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 152 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 153 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 154 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 155 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper 156 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 6A/16A 3 pin socket and plug with indicating light and all other associated work. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 157 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 158 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Installation, connection and commissioning of Wall Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( AC Wall Bracket Fan will be supplied by Railway )

Installation, connection and commissioning of Air Circulator Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( Air Circulator Bracket Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure with Metal Door ), 8 way, 50Hz, complete with 4 166 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 300mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure with Metal Door ), 3Ph, 4 way per phase, 168 415V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 300mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole 170 - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. d) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF, TRIP " indication for all incoming and outgoing feeders - 10 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 100 KVA to 125 KVA Load :- a) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' 172 fault indication - 2 nos. b) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. c) MCCB, 4 Pole, 160 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. d) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 2 nos. e) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) Tinned Copper Busbar (4 Bar) each of capacity 300 Amps., 415V, 50 Hz. - 1 set. g) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 6 nos. h) CT of suitable ratio for MFM - 18 nos. i) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 38 nos. j) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. k) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus /Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

LT cubicle Outdoor Type Wall Mounted Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Microprocessor Release of breaking capacity 36kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory, suitable for Release Range ( 63-160 ) Amp, 4 Pole - 2 nos. b) MCCB, 4 Pole,125 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. c) MCCB with Microprocessor Release of breaking capacity 36kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory, 174 suitable for Release Range ( 16-40 ) Amp, 4 Pole - 6 nos. d) Tinned Copper Busbar ( 4 Bar ) each of capacity 150 Amps., 415V, 50 Hz - 1 set e) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. f) CT of suitable ratio for MFM - 24 nos. g) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 33 nos. h) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. i) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus /Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 100 176 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S)

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 200 Amp, 6 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S)

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 178 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast 180 Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Supply of energy efficient bore well submersible pump-motor set of pump discharge capacity approx.1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other accessories such as suitable length 3 core flat copper conductor cable of size 1.5 sq.mm, 1100 Volt 181 grade ( motor to starter panel ), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indications etc.including installation, testing and commissioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of GI column pipe - Tata / Jindal / Bansal ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of pump- motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Supply of energy efficient bore well submersible pump-motor set of pump discharge capacity approx.1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other 182 accessories such as suitable length 3 core flat copper conductor cable of size 1.5 sq.mm, 1100 Volt grade ( motor to starter panel ), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indications etc. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of GI column pipe - Tata / Jindal / Bansal ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of pump-motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Installation, testing and commissioning of above Submersible Pump-Motor set with column pipe and all other accessories.

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary massonary work.

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 185 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

D-4) NAME OF THE WORK :- Electrical General work for "Upgradation

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe (PE-100 grade, PN-10 or higher). ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 187 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe (PE-100 grade, PN-10 or higher) without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 100 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps including supply of suitable size GI Clamp and GI nut-bolts and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 195 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section with minimum bottom diameter 450 mm or higher. The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction 196 of mast complies with BS EN 10 025 of appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 197 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum 198 sheet thickness - 3mm ) Pole of overall length 7 M with single / double / four arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 199 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 200 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED outdoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street light fitting will be supplied by Railway )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 204 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 206 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 207 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 208 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 209 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 210 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 211 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper 212 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 6A/16A 3 pin socket and plug with indicating light and all other associated work. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 213 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 214 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Installation, connection and commissioning of Wall Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( AC Wall Bracket Fan will be supplied by Railway )

Installation, connection and commissioning of Air Circulator Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( Air Circulator Bracket Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure with Metal Door ), 8 way, 50Hz, complete with 4 222 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 300mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure with Metal Door ), 3Ph, 4 way per phase, 224 415V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 300mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole 226 - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. d) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF, TRIP " indication for all incoming and outgoing feeders - 10 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) 228 MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 100 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S)

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 200 229 Amp, 6 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S)

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 250 KVA to 300 KVA Load :- a) MCCB, 4 Pole, ( 160 - 400 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 63 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) Change over switch 400A, 4P, 415V - 1 No. e) Change over switch 63A, 230 4P, 415V - 1 No. f) MCB 4 Pole, 32 Amp, 415V, 50 Hz, 10kA C-curve - 2 nos. g) Power Contactor, 3 Pole, 12A, 415V, 50Hz - 2 nos. h) Astronomical Timer Switch - 2 nos. i) MCB 2 Pole, 10 Amp, 415V, 50 Hz, 10kA C-curve - 4 nos. h) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. i) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High- Low ), Neutral Current, K Factor - 8 nos. j) CT of suitable ratio for MFM - 24 nos. k) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 30 nos. l) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. m) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos.c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast 234 Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

LT cubicle Outdoor Type Wall Mounted Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Microprocessor Release of breaking capacity 36kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory, suitable for Release Range ( 63-160 ) Amp, 4 Pole - 2 nos. b) MCCB, 4 Pole,125 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. c) MCCB with Microprocessor Release of breaking capacity 36kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory, suitable for Release Range ( 16-40 ) Amp, 4 Pole - 6 nos. d) Tinned Copper Busbar ( 4 Bar ) each of capacity 150 Amps., 415V, 50 Hz - 1 set e) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. f) CT of suitable ratio for MFM - 24 nos. g) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 33 nos. h) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. i) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of Junction Box made of 14 SWG GI sheet of size 450 mm x 300 mm x 250 mm consisting with 2 nos. 63A porcelain fuse units (kitkats) conforming to IS:2086 -1993 complete with 237 hinged door with locking arrangement duly painted with two coats of paint after one coat of anti- corro- sive Red Oxide paint as per Sr. DEE/G/HWH's Drawing No. MISC / E / 2 / 05 including fixing, connection and commi- ssioning of above Junction Box on AT Mast with GI clamps made of GI flat of size 40mm x 6mm with GI nuts-bolts.

Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V 238 AC, 50Hz of capacity 25-32A / 32-40A / 40- 50A, 4 Pole complete with metal enclosure with spreader terminals, including fixing, connection, testing and commissioning. ( Make - L&T /Siemens / ABB / Hager / Legrand / Schneider / C&S )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 700 x 480 x 210 mm ( IP-55 ) / equivalent dimension heavy duty, Outdoor type, UV ray protected, self fire- 239 extinguishing, shock resistance IK08 or above and IP65 degree of protection grade transparent polycarbonate DB box including fitment with suitable size and shape Mild Steel ( MS ) bracket, testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / Grasp / ABB / Legrand / Spelsberg / EPP Composites )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 250 x 250 x 155 mm ( IP-55 ) / equivalent dimension heavy duty, Outdoor type, UV ray protected, self fire- 240 extinguishing, shock resistance IK08 or above and IP65 degree of protection grade transparent polycarbonate DB box including fitment with suitable size and shape Mild Steel ( MS ) bracket, testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / Grasp / ABB / Legrand / Spelsberg / EPP Composites )

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary massonary work.

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 242 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

E-5) NAME OF THE WORK :- Electrical General work for "Upgradation

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe (PE-100 grade, PN-10 or higher). ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 244 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe (PE-100 grade, PN-10 or higher) without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 100 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps including supply of suitable size GI Clamp and GI nut-bolts and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 251 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 252 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section with minimum bottom diameter 450 mm or higher. The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction 253 of mast complies with BS EN 10 025 of appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 254 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum sheet thickness - 3mm ) Pole of overall length 7 M with single / double / four arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 256 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 257 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED outdoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street light fitting will be supplied by Railway )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 261 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 262 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 263 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 264 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 265 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 267 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 268 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper 269 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 6A/16A 3 pin socket and plug with indicating light and all other associated work. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 270 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 271 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Extra cost involvement for modular switch, bell push, plug socket, fan regulator, USB point, TV socket etc. with other accessories ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Installation, connection and commissioning of Wall Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( AC Wall Bracket Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure with Metal Door ), 8 way, 50Hz, complete with 4 279 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 300mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure with Metal Door ), 3Ph, 4 way per phase, 281 415V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 300mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole 283 - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. d) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF, TRIP " indication for all incoming and outgoing feeders - 10 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 100 KVA to 125 KVA Load :- a) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. c) MCCB, 4 Pole, 160 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. d) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, 285 "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 2 nos.e) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) Tinned Copper Busbar (4 Bar) each of capacity 300 Amps., 415V, 50 Hz. - 1 set. g) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 6 nos. h) CT of suitable ratio for MFM - 18 nos. i) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 38 nos. j) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. k) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus /Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

LT cubicle Outdoor Type Wall Mounted Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Microprocessor Release of breaking capacity 36kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory, suitable for Release Range ( 63-160 ) Amp, 4 Pole - 2 nos. b) MCCB, 4 Pole,125 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. c) MCCB with Microprocessor Release of breaking capacity 36kA at 415V, AC 50Hz ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt 287 Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory, suitable for Release Range ( 16-40 ) Amp, 4 Pole - 6 nos. d) Tinned Copper Busbar ( 4 Bar ) each of capacity 150 Amps., 415V, 50 Hz - 1 set e) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos.f) CT of suitable ratio for MFM - 24 nos. g) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 33 nos. h) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. i) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus /Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 100 289 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S)

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast 290 Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Supply of energy efficient submersible Pump Motor set in multistage construction of maximum discharge 5000 GPH at 57M head with AC induction motor of suitable capacity for operation on 3 Phase, 415V, 50Hz, AC supply system complete with all accessories such as suitable length of 3 291 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one flow meter, one delivery sluice valve one Non-Return Valve, one pressure gauge and all other accessories. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel )

Installation, testing and commissioning of Submersible Pump-Motor set ( 5000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with DOL 293 Starter suitable for 7.5 KW / 10 HP, 3Ph, 415V, 50Hz ( 5000 GPH x 57 M head ) pump motor with Electronic Over Current Relay, single phase preventer with Ammeter & Voltmeter ( Make of pump- motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Fixing, connection, testing and commissioning of above Submersible Pump Controller with suitable arrangement.

Supply of Supporting Clamps for holding column pipe made of GI flat of size 400mm x 100mm x 12mm along with GI nuts and bolts

Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 75mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of Submersible Sewage Pump-Motor set of discharge capacity 92 Cubic metre per hour and discahrge head 9 Mtrs. (approx.) suitable for operation on 415V, 50 Hz, 3Ph / 240V, 50 Hz, 1 Ph supply system complete with one fully automatic starter control panel with all protection and 298 float switch alongwith 10 Mtrs. long multicore copper flexible cable of suitable size for motor operation, 5 mtr. Lifting Iron Chain, GI clamps, steel wire rope with double pulley, PVC flexible pipe of suitable size and length including installation and commissioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary massonary work.

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 300 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

F-6) NAME OF THE WORK :- Electrical General work for "Upgradation

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 301 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 302 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 303 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper 305 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 6A/16A 3 pin socket and plug with indicating light and all other associated work. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 306 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 307 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 310 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 311 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 312 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 313 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED outdoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure with Metal Door ), 8 way, 50Hz, complete with 4 319 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 300mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure with Metal Door ), 3Ph, 4 way per phase, 321 415V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 300mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Dust and vermin proof metal Busbar Chamber made of 16 SWG ( 1.6mm ) MS sheet duly powder coated consisting of 4 nos. tinned copper busbar of each bar of capacity 100 323 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / LK (Formerly L&T) / C&S)

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 450 x 375 x 200 mm ( IP-55 ) / equivalent dimension heavy duty, Outdoor type, UV ray protected, self fire- 324 extinguishing, shock resistance IK08 or above and IP65 degree of protection grade transparent polycarbonate DB box including fitment with suitable size and shape Mild Steel ( MS ) bracket, testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / Grasp / ABB / Legrand / Spelsberg / EPP Composites )

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum 325 sheet thickness - 3mm ) Pole of overall length 7 M with single / double / four arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 326 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 327 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe (PE-100 grade, PN-10 or higher). ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 330 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe (PE-100 grade, PN-10 or higher) without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps including supply of suitable size GI Clamp and GI nut-bolts and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 337 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 338 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 100 KVA to 125 KVA Load :- a) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. c) MCCB, 4 Pole, 160 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. d) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 2 nos. e) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) Tinned Copper Busbar (4 Bar) each of capacity 300 Amps., 415V, 50 Hz. - 1 set. g) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 6 nos. h) CT of suitable ratio for MFM - 18 nos. i) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 38 nos. j) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job.k) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus /Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 341 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job.l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Elmeasure / Stelmec / HPL / Socomec )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories.

Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V 343 AC, 50Hz of capacity 25-32A / 32-40A / 40- 50A, 4 Pole complete with metal enclosure with spreader terminals, including fixing, connection, testing and commissioning. ( Make - L&T /Siemens / ABB / Hager / Legrand / Schneider / C&S )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section with minimum bottom diameter 450 mm or higher. The entire mast should be hot dipped galvanised 344 after fabrication internally and externally in accordance with BS 729. All steel used in the construction of mast complies with BS EN 10 025 of appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 345 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole 346 - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. d) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF, TRIP " indication for all incoming and outgoing feeders - 10 nos.complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories

Supply of energy efficient submersible Pump Motor set in multistage construction of maximum discharge 5000 GPH at 57M head with AC induction motor of suitable capacity for operation on 3 Phase, 415V, 50Hz, AC supply system complete with all accessories such as suitable length of 3 348 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one flow meter, one delivery sluice valve one Non-Return Valve, one pressure gauge and all other accessories. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel )

Installation, testing and commissioning of Submersible Pump-Motor set ( 5000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with DOL 350 Starter suitable for 7.5 KW / 10 HP, 3Ph, 415V, 50Hz ( 5000 GPH x 57 M head ) pump motor with Electronic Over Current Relay, single phase preventer with Ammeter & Voltmeter ( Make of pump- motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Fixing, connection, testing and commissioning of above Submersible Pump Controller with suitable arrangement.

Supply of energy efficient submersible Pump Motor set in multistage construction of maximum discharge 10000 GPH at 54M head with AC induction motor of suitable capacity for operation on 3 Phase, 415V, 50Hz, AC supply system complete with all accessories such as suitable 352 length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one flow meter, one delivery sluice valve one Non-Return Valve, one pressure gauge and all other accessories. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel )

Installation, testing and commissioning of Submersible Pump-Motor set ( 10000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with Fully Automatic Star-Delta Starter suitable for 11 KW / 15 HP, 3Ph, 415V, 50Hz ( 10000 GPH x 54 M head ) pump motor with Electronics/ Pneumatic Timer and Electronic Over Current Relay, single phase preventer with Ammeter & Voltmeter including installation, fixing, connection and commissioning. ( Make of pump-motor set starter - ( LK (L&T) / Siemens / ABB / BCH )

Installation, fixing, testing and commissioning of above starter by suitable size GI clamps and nut-bolts

Supply of Supporting Clamps for holding column pipe made of GI flat of size 400mm x 100mm x 12mm along with GI nuts and bolts

Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 75mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 100mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of Centrifugal Self Priming Mono Block Pump with capacity 1.1 KW/1.5 HP suitable for operation in 1 Ph, 220-250V, 50 Hz supply including Installation, testing and commissioning.

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary massonary work.

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast 362 Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 363 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

G-Schedule G-GST as applicable ( At present @ 18% )( For Schedule A

Goods & Services Tax ( at present @ 18% )