Improvement works at SLDC

Through scrapping of roof tiles and plastered surfaces on open terrace to remove dust, green moss, algae etc., washing with soap, soda and water for preparing the surface suitable for priming with Nitobond SBR including cost of all materials, labour charges, lead, lift etc complete

Providing one layer of 45 GSM fibre glass mesh and one coat of Fosroc Nitobond SBR latex primer and two coats of Fosroc Brushbond RFX elastomeric polymer modified cementitious waterproofing coating over the primed surface area. All material and lbour charges.

Dismantling the existing aluminium partition section and refixing the same where ever necessary including cost of all materials , ,lead,lift labour for fixing etc., complete.

Dismantling the existing false ceiling carefully and stacking the scrab materials, devolution of scrab to central store at Kuthiraikalmedu including cost of all tools, lead,lift all labour charges etc., complete.

Providing and fixing in position of anodised aluminium framed partition of approved quality including supply, fabrication and fixing the aluminium partition in position, cost of all materials, labour charges, lead, lift, T&Ps, personal protective equipments, other safety appliances, etc., complete and (i) Vertical and horizontal posts - anodized natural colour matt finish aluminium section 63x38mm of thickness 2.45mm, countrywood filled alround, verticals post and horizontals shall be within 900mm spacing c/c (ii) the top and Bottom panels should be covered with 5.5mm thick plain glass with necessary rubber beeding and covered with Aluminium beeding on both sides of the shutter and as directed by the site Engineer. The required power supply shall be provided by the department at one point .

Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish of single leaf fully glazed sliding door with 5mm thick plain glass for top and bottom panels , the Shutter bottom rail of 100x44.45x2.50 mm @ 1.974 kg/m, Top, Vertical, lock rails of 50x44.45x2.50mm @ 1.292 kg/m, Running channel section: 50 x 44.45 x 2.50mm @ 1.292 kg/m, on top and bottom and necessary accessories such as Alu.clips, Alu handle 100x30mm @ 0.988 kg/m on both sides, lock, rollers, including cost of materials, labour charges, for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition afterfixing etc., complete.

Providing false ceiling using new Calcium Silicate Board Plain Sheets (or) Equivalent Board False ceiling 10 mm thick with aluminium grid work of size (600 mm x 600 mm) using 38x 25x1.50mm for main and cross runners, grid suspended from ceiling with 6mm MS rods with adjustable bolts and nuts arrangement including Painting two coats of emulsion paint over a coat of primer, cost of all materials, labour charges, lead, lift, etc,. complete as per standard specifications and as directed by the engineer at site.

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated Single Core Unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour with continuous earth wire connection of 14SWG TC open for PVC light point/fan point including cost of all materials,lead, lift, etc., complete as per standard specifications and as directed by the engineer at site etc., complete

Supply and fixing of LED INDOOR 24w LED 4000k 2x2 square Type Recessed Fitting LIGHT EMITING DIODE including cost of all materials,lead, lift, etc., complete as per standard specifications and as directed by the engineer at site etc., complete.

Supply and fixing of 7W /9W LED Bulb (Philips / Havells /equivalent) with TW round blocks on wall or ceiling with with PVC unsheathed copper laed from terminals to the fittings including cost of all materials, Labour charges, etc., complete.