RequiredExperience with Government Bid to RA enabled No Revolving Chair ( 6 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos
Requiredof 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos
Requiredof 50 mm Size
RequiredABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos
Requiredof 50 mm Size
RequiredElectro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos
Requiredof 50 mm Size
Required1/6 Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos
Requiredof 50 mm Size
RequiredAluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos
Requiredof 50 mm Size
RequiredAluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter
RequiredNylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter
RequiredAluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter
RequiredWooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter
RequiredChrome finish with 5 wheels Arm Material pu foam bonded chrome coted 19 mm (+/- 2 mm) round SS pipe with cushion
Requiredpu foam bonded chrome coted seat material PU foam covered with mesh fabric PU foam covered with mesh fabric
RequiredPU Foam covered with Fabric Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover Material for Backrest N.A mesh fabric
RequiredInnner frame Upholstered with Mesh fabric and mounted on main assembly
Requiredpure leather
Required100% polyester fabric
Requirednylon with poly olefin elastomer
RequiredLeatherite
RequiredN.A
RequiredPolyester mesh with fibreglass plastic frame Material of Fabric of Seat Cover N.A leatherite
RequiredN.A GSM/Thickness of fabric ±5%(Gram/Square N.A * 2/6 meter) GENERAL Chair Type only revolving without tilting mechanism 360 Degree swivel
Requiredposture control with multilocking position synchronized mechanism
Requiredonly revolving without tilting mechanism Tilt Tension Adjustment No * Height Adjustment ± 5(mm) N.A up to 100 mm
Requiredup to 120 mm
RequiredN.A
Requiredup to 90 mm
Requiredup to 65 mm Arm With With Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back Arm Type Fixed Adjustable
RequiredFixed Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design Yes Yes
RequiredNo Back type push back push back
Requiredfixed
Requiredheight adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame * backrest has separate adjustable headrest No Yes
RequiredNo Seat type fixed fixed Seat is curved Yes * Locking mechanism No * Type of locking N.A * Number of arm movement N.A 2(up & down)
Required4(up & down end left & right)
Required6(Up & Down
RequiredLeft & Right And Swivel)
Required8(Up & Down
RequiredLeft & Right
RequiredSwivel And Front & Back)
RequiredN.A
Required6 (UP and down
Requiredfront and back
Requiredswivel)
Required4 (UP and down
Requiredfront and back) Lumber support N.A integrated
Requiredexternal & fixed
Requiredexternal & adjustable
RequiredN.A
RequiredCushioned and 3/6 upholstered Lumbar Support DIMENSION Overall Chair Height ±15mm 670 670 Backrest Height ±15mm 460 460.0 Backrest Width ±10mm 410 410.0 Seat Height ±15 mm 420 420 Seat Width ±10 mm 440 440
Required480
Required500
Required520
Required550
Required460
Required360
Required415 Seat Depth ±10 mm 400 400
Required460
Required480
Required500
Required520
Required550
Required420
Required440
Required540
Required360 Thickness of MS Plate Joining the under structure with Seat 0.2 * Thickness of Plywood used in Seat ±1(mm) N.A 12 mm
Required15 mm
Required18 mm
RequiredN.A
Required65 mm Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm
Required15 mm
Required18 mm
RequiredN.A Padestal Size (Diameter in mm) +/- 10 mm 600 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A 25 mm
RequiredN.A Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A 25 mm
RequiredN.A WARANTEE Warrantee period in number of years 1-year 1-year CERTIFICATION Test reports to be furnished to buyer on demand NO NO BIFMA Certification NO YES
RequiredNO OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered YES YES 4/6 product is ISO 18001:2007 certified Green guard certification YES YES Aiota - YES * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
